Closing in 0 days TDR #29320566

Bids Are Invited For Layer 2 Managed Switch - Number Of Ports: 24 Ethernet Based Portssfp Based Ports: 4 Gigabit Sfp Portsswitching Speed: Minimum 56Gbps Switchingpacket Forwarding Rates: Minimum 35 Million Ppssupport For Minimum 16K Mac Entries And 4K Vl

Issued by · , Jammu And Kashmir
Tender Value
22 Lakhs
Estimated cost
Bid Submission
13 Oct 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
→ Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Bids Are Invited For Layer 2 Managed Switch - Number Of Ports: 24 Ethernet Based Portssfp Based Ports: 4 Gigabit Sfp Portsswitching Speed: Minimum 56Gbps Switchingpacket Forwarding Rates: Minimum 35 Million Ppssupport For Minimum 16K Mac Entries And 4K Vlansvlan: Port Based Vlan, Mac Based Vlan And Vlan Trunkingshould Support:• Optical Transceiver Digital Diagnostic Monitoring For All Sfp Ports Of 1G And 10G• Capability To Support Access List Based On Ipv4 / V6 Address Protocol Type Vlan-Id Mac-Id• Time Based Acl• Minimum 700 Ingress Access Control Entries• Sshv2 Snmpv3; Snmp Over Ipv6 To Provide Network Security By Encrypting Administrator Traffic During Telnet And Snmp Sessions• Port Security To Secure The Access To An Access Or Trunk Port Based On Mac Address And It Should Be Minimum 60 Mac-Id Per Port And Support Ip-Mac-Port Binding• Max 4 Ip Interfaces Arp Proxy Ipv6 Neighbor Discovery ( Nd ) • Minimum 4 Nos Of Static Ipv6 And Ipv4 Routes.• Mac Address Notification To Allow Administrators To Be Notified Of Users Added To Or Removed From The Network.• Traffic Monitoring• Tftp To Reduce The Cost Of Administering Software Upgrades By Downloading From A Centralized Location Also It Should Support Ftp.• Dhcp Server Screening And Client Filtering • Network Timing Protocol ( Ntp / Sntp ) To Provide An Accurate And Consistent Timestamp To All Intranet Switches• Configuration Rollback To Replace Current Configuration With Any Saved Configuration File• Built In Power Diagnostics System To Detect Hardware Failures.• Loopback Detection• 802.3Ad: Link Aggregation Control Protocol ( Lacp ) • Duplicate Address Detection & Dynamic Vlan Assignmentshould Provide Following Logs:• Interface Up & Down• Optical Power Sfp Threshold Alarms• Threshold Alarms For Temperature.• Audit Logs For All Activities Carried Out On The System Like User Logins, Failed Access Attempts With Source.Certifications:• Safety Certificate Of Ul.• Emc Certificate Of Ce And Fcc , Liu - Type: Lcfully Loaded 24 Corealuminum Base Material For Light Mountingrack Mountable For 24 Port And Should Be Loaded.Can Manage Both Splices And Terminationsrubber Fiber Slotted Bracket Built-In, Metal Splice Shelf To Protect The Fibersfiber Spools Built-In For 900Μm Tight Buffered Fiber Storingcapable Of Storing Up To 3 Meters Of 900Μm Tight Buffered Fiber Per Adaptermetal Shelf Thickness:Minimum 1.2Mm ( Made Of Aluminum ) Adaptor Panel Thickness: Minimum 1.5Mm ( Made Of Aluminum ) Accessory Kit: Cable Ties, Mounting Ear Screws, And Spiral Wrap Tube , Optical Fibre Cable - No. Of Fibres: 24Outer Sheath: Hdpecorrugated Steel Tape Armouringwater Proof & Moisture Resistantcrush Resistantstandards: Iso 11801 , Iec 60793-1 / 60794-1-2 , Itu-T-Rec G.652D , Sfp Optical - Modal Bandwidth: 10 Mhz / Kmoptical Component: 1310 Nm Or Abovedigital Optical Monitoring Supportsfp Type: Lc , Joint Closure Fibre - 24 Portswall Mounted , Pig Tales - Type: Lccorning Single Modeconnector: Zirconia Ceramic Ferrulelength: 1 Mtr , Optical Patch Cord - Type: Lc-Lc Sm Duplexlength: 3 Mtrconnector: Zirconia Ceramic Ferruleoptical Fibre: Single Mutli Modecable Type: 0.9 Mmfiber Corning Single Mode G652d, G657a, G657bhigh Precision Ceramic Ferrule , Racks - Rack Size: 9U Wall Mount 19’’ Closed Framefront Glass Door With Lock And Keypower Distribution Unitroof Mounted Fan Unit 90 Cfm / 230V Acminimum 6 Sockets ( 5 Amp ) , Ethernet Patch Cord -2 Mtr - Length: 2 Meterfour Pair Twisted Stranded Cable Terminated With Rj45 Modular Plugs At Both The Ends.24 Awg, Multi-Strands & Bare Copper Conductor Metal.Insulation Material: Hdpe With Fr Pvcheat Resistance: Minimum 60 °Ccompliance To Tia / Eia-568-C.2 Standard.Compliance To Tia 568B.2-1. Certificate To Be Submitted With Bid. , Ethernet Patch Cord -5 Mtr - Length: 5 Meterfour Pair Twisted Stranded Cable Terminated With Rj45 Modular Plugs At Both The Ends.24 Awg, Multi-Strands & Bare Copper Conductor Metal.Insulation Material: Hdpe With Fr Pvcheat Resistance: Minimum 60 °Ccompliance To Tia / Eia-568-C.2 Standard.Compliance To Tia 568B.2-1. Certificate To Be Submitted With Bid. , Face Plate, Io & Gang Box - Contact Material: Copper Alloysingle Gang Square Platei / O Jack Should Be Category 6, Tia568b.2-1 – 250Mhzi / O Jack Should Allow For A Minimum Of 200 Re-Terminations Without Signal Degradation Below Standards Compliance Limits.I / O Jack Should Beconstructed Of High Impact, Flame-Retardant Thermoplastic With Colour And Icon Options For Better Visual Identification.Information Outlet ( Rj45 Jack ) Should Be Covered Under Etl Verification Program For Compliance With Tia568b.2-1, Etl Certificate To Be Submitted With Bid. , Hdpe Duct - Material Of The Duct: High Density Polyethylene ( Hdpe ) Diameter: 40Mm , Galvanised Iron Poles ( To Hold 24 Core Optical Fibre ) - Material Of The Pole: Galvanised Ironlength Of The Pole: 3.0 Meter , Pvc Conduit 40Mm - Diameter: 40 Mmisi Marked , Pvc Conduit 32 Mm - Diameter: 32 Mmisi Marked , Casing Capping - Thickness: 25Mm Total Quantity : 1

BOQ

Sl. No. Item TitleItem Description
1Layer 2 Managed SwitchNumber of Ports: 24 Ethernet based portsSFP Based Ports: 4 Gigabit SFP PortsSwitching Speed: Minimum 56GBPS switchingPacket forwarding rates: Minimum 35 million PPSSupport for minimum 16K MAC entries and 4K VLANsVLAN: Port based VLAN, MAC based VLAN and VLAN trunkingShould support:• Optical Transceiver Digital Diagnostic Monitoring for All SFP ports of 1G and 10G• Capability to support access list based on IPv4/v6 address Protocol type VLAN-ID MAC-ID• Time based ACL• Minimum 700 Ingress Access Control Entries• SSHv2 SNMPv3; SNMP over IPv6 to provide network security by encrypting administrator traffic during Telnet and SNMP sessions• Port security to secure the access to an access or trunk port based on MAC address and it should be minimum 60 MAC-ID per Port and support IP-MAC-Port binding• Max 4 IP Interfaces ARP Proxy IPv6 Neighbor Discovery (ND)• Minimum 4 Nos of static IPV6 and IPV4 routes.• MAC address notification to allow administrators to be notified of users added to or removed from the network.• Traffic monitoring• TFTP to reduce the cost of administering software upgrades by downloading from a centralized location also it should Support FTP.• DHCP server screening and client filtering • Network Timing Protocol (NTP/SNTP) to provide an accurate and consistent timestamp to all intranet switches• Configuration rollback to replace current configuration with any saved configuration file• Built in power diagnostics system to detect hardware failures.• Loopback Detection• 802.3ad: Link Aggregation Control Protocol (LACP)• Duplicate Address Detection & Dynamic VLAN AssignmentShould provide following logs:• Interface UP & Down• Optical power SFP threshold alarms• Threshold alarms for Temperature.• Audit logs for all activities carried out on the system like user logins, failed access attempts with source.Certifications:• Safety Certificate of UL.• EMC Certificate of CE and FCC
2LIUType: LCFully loaded 24 coreAluminum base material for light mountingRack Mountable for 24 Port and should be loaded.Can manage both splices and terminationsRubber fiber slotted bracket built-in, metal splice shelf to protect the fibersFiber spools built-in for 900µm tight buffered fiber storingCapable of storing up to 3 meters of 900µm tight buffered fiber per adapterMetal Shelf thickness:Minimum 1.2mm (made of Aluminum)Adaptor Panel thickness: Minimum 1.5mm (made of Aluminum)Accessory kit: Cable ties, mounting ear screws, and spiral wrap tube
3Optical Fibre CableNo. of fibres: 24Outer Sheath: HDPECorrugated Steel Tape ArmouringWater Proof & moisture resistantCrush resistantStandards: ISO 11801 ,IEC 60793-1/60794-1-2 ,ITU-T-REC G.652D
4SFP OpticalModal Bandwidth: 10 MHz/KmOptical Component: 1310 nm or aboveDigital Optical Monitoring SupportSFP Type: LC
5Joint Closure Fibre24 PortsWall mounted
6Pig TalesType: LCCorning Single modeConnector: Zirconia ceramic ferruleLength: 1 mtr
7Optical Patch CordType: LC-LC SM DuplexLength: 3 mtrConnector: Zirconia ceramic ferruleOptical Fibre: Single mutli modeCable Type: 0.9 mmFiber corning single mode G652D,G657A,G657BHigh precision ceramic ferrule
8RacksRack Size: 9U Wall Mount 19’’ Closed FrameFront Glass Door with Lock and KeyPower Distribution UnitRoof Mounted Fan unit 90 CFM/230V ACMinimum 6 Sockets (5 Amp)
9Ethernet Patch Cord -2 MtrLength: 2 meterFour pair twisted stranded cable terminated with RJ45 modular plugs at both the ends.24 AWG, Multi-strands & Bare Copper Conductor Metal.Insulation Material: HDPE with FR PVCHeat Resistance: Minimum 60 °CCompliance to TIA/EIA-568-C.2 standard.Compliance to TIA 568B.2-1. Certificate to be submitted with bid.
10Ethernet Patch Cord -5 MtrLength: 5 meterFour pair twisted stranded cable terminated with RJ45 modular plugs at both the ends.24 AWG, Multi-strands & Bare Copper Conductor Metal.Insulation Material: HDPE with FR PVCHeat Resistance: Minimum 60 °CCompliance to TIA/EIA-568-C.2 standard.Compliance to TIA 568B.2-1. Certificate to be submitted with bid.
11Face Plate, IO & Gang BoxContact Material: Copper AlloySingle Gang Square PlateI/O Jack should be Category 6, TIA568B.2-1 – 250MHzI/O Jack should allow for a minimum of 200 re-terminations without signal degradation below standards compliance limits.I/O Jack should beconstructed of high impact, flame-retardant thermoplastic with colour and icon options for better visual identification.Information outlet (RJ45 jack) should be covered under ETL Verification program for compliance with TIA568B.2-1, ETL certificate to be submitted with bid.
12HDPE DuctMaterial of the duct: High Density Polyethylene (HDPE)Diameter: 40mm
13Galvanised Iron Poles (To hold 24 core Optical Fibre)Material of the pole: Galvanised IronLength of the pole: 3.0 meter
14PVC Conduit 40mmDiameter: 40 mmISI Marked
15PVC Conduit 32 mmDiameter: 32 mmISI Marked
16Casing CappingThickness: 25mm

AI Tender Summary

OUR REF NO 29320566
AUTHORITY
TENDER VALUE 22 Lakhs
LAST DATE 13-10-2021
Authority
Authority Name MINISTRY OF HUMAN RESOURCE DEVELOPMENT
Work Description Bids Are Invited For Layer 2 Managed Switch - Number Of Ports: 24 Ethernet Based Portssfp Based Ports: 4 Gigabit Sfp Portsswitching Speed: Minimum 56Gbps Switchingpacket Forwarding Rates: Minimum 35 Million Ppssupport For Minimum 16K Mac Entries And 4K Vlansvlan: Port Based Vlan, Mac Based Vlan And Vlan Trunkingshould Support:• Optical Transceiver Digital Diagnostic Monitoring For All Sfp Ports Of 1G And 10G• Capability To Support Access List Based On Ipv4 / V6 Address Protocol Type Vlan-Id Mac-Id• Time Based Acl• Minimum 700 Ingress Access Control Entries• Sshv2 Snmpv3; Snmp Over Ipv6 To Provide Network Security By Encrypting Administrator Traffic During Telnet And Snmp Sessions• Port Security To Secure The Access To An Access Or Trunk Port Based On Mac Address And It Should Be Minimum 60 Mac-Id Per Port And Support Ip-Mac-Port Binding• Max 4 Ip Interfaces Arp Proxy Ipv6 Neighbor Discovery ( Nd ) • Minimum 4 Nos Of Static Ipv6 And Ipv4 Routes.• Mac Address Notification To Allow Administrators To Be Notified Of Users Added To Or Removed From The Network.• Traffic Monitoring• Tftp To Reduce The Cost Of Administering Software Upgrades By Downloading From A Centralized Location Also It Should Support Ftp.• Dhcp Server Screening And Client Filtering • Network Timing Protocol ( Ntp / Sntp ) To Provide An Accurate And Consistent Timestamp To All Intranet Switches• Configuration Rollback To Replace Current Configuration With Any Saved Configuration File• Built In Power Diagnostics System To Detect Hardware Failures.• Loopback Detection• 802.3Ad: Link Aggregation Control Protocol ( Lacp ) • Duplicate Address Detection & Dynamic Vlan Assignmentshould Provide Following Logs:• Interface Up & Down• Optical Power Sfp Threshold Alarms• Threshold Alarms For Temperature.• Audit Logs For All Activities Carried Out On The System Like User Logins, Failed Access Attempts With Source.Certifications:• Safety Certificate Of Ul.• Emc Certificate Of Ce And Fcc , Liu - Type: Lcfully Loaded 24 Corealuminum Base Material For Light Mountingrack Mountable For 24 Port And Should Be Loaded.Can Manage Both Splices And Terminationsrubber Fiber Slotted Bracket Built-In, Metal Splice Shelf To Protect The Fibersfiber Spools Built-In For 900Μm Tight Buffered Fiber Storingcapable Of Storing Up To 3 Meters Of 900Μm Tight Buffered Fiber Per Adaptermetal Shelf Thickness:Minimum 1.2Mm ( Made Of Aluminum ) Adaptor Panel Thickness: Minimum 1.5Mm ( Made Of Aluminum ) Accessory Kit: Cable Ties, Mounting Ear Screws, And Spiral Wrap Tube , Optical Fibre Cable - No. Of Fibres: 24Outer Sheath: Hdpecorrugated Steel Tape Armouringwater Proof & Moisture Resistantcrush Resistantstandards: Iso 11801 , Iec 60793-1 / 60794-1-2 , Itu-T-Rec G.652D , Sfp Optical - Modal Bandwidth: 10 Mhz / Kmoptical Component: 1310 Nm Or Abovedigital Optical Monitoring Supportsfp Type: Lc , Joint Closure Fibre - 24 Portswall Mounted , Pig Tales - Type: Lccorning Single Modeconnector: Zirconia Ceramic Ferrulelength: 1 Mtr , Optical Patch Cord - Type: Lc-Lc Sm Duplexlength: 3 Mtrconnector: Zirconia Ceramic Ferruleoptical Fibre: Single Mutli Modecable Type: 0.9 Mmfiber Corning Single Mode G652d, G657a, G657bhigh Precision Ceramic Ferrule , Racks - Rack Size: 9U Wall Mount 19’’ Closed Framefront Glass Door With Lock And Keypower Distribution Unitroof Mounted Fan Unit 90 Cfm / 230V Acminimum 6 Sockets ( 5 Amp ) , Ethernet Patch Cord -2 Mtr - Length: 2 Meterfour Pair Twisted Stranded Cable Terminated With Rj45 Modular Plugs At Both The Ends.24 Awg, Multi-Strands & Bare Copper Conductor Metal.Insulation Material: Hdpe With Fr Pvcheat Resistance: Minimum 60 °Ccompliance To Tia / Eia-568-C.2 Standard.Compliance To Tia 568B.2-1. Certificate To Be Submitted With Bid. , Ethernet Patch Cord -5 Mtr - Length: 5 Meterfour Pair Twisted Stranded Cable Terminated With Rj45 Modular Plugs At Both The Ends.24 Awg, Multi-Strands & Bare Copper Conductor Metal.Insulation Material: Hdpe With Fr Pvcheat Resistance: Minimum 60 °Ccompliance To Tia / Eia-568-C.2 Standard.Compliance To Tia 568B.2-1. Certificate To Be Submitted With Bid. , Face Plate, Io & Gang Box - Contact Material: Copper Alloysingle Gang Square Platei / O Jack Should Be Category 6, Tia568b.2-1 – 250Mhzi / O Jack Should Allow For A Minimum Of 200 Re-Terminations Without Signal Degradation Below Standards Compliance Limits.I / O Jack Should Beconstructed Of High Impact, Flame-Retardant Thermoplastic With Colour And Icon Options For Better Visual Identification.Information Outlet ( Rj45 Jack ) Should Be Covered Under Etl Verification Program For Compliance With Tia568b.2-1, Etl Certificate To Be Submitted With Bid. , Hdpe Duct - Material Of The Duct: High Density Polyethylene ( Hdpe ) Diameter: 40Mm , Galvanised Iron Poles ( To Hold 24 Core Optical Fibre ) - Material Of The Pole: Galvanised Ironlength Of The Pole: 3.0 Meter , Pvc Conduit 40Mm - Diameter: 40 Mmisi Marked , Pvc Conduit 32 Mm - Diameter: 32 Mmisi Marked , Casing Capping - Thickness: 25Mm Total Quantity : 1
Basic Detail
Tender No GEM/2021/B/1541772
Bidding Type Tender
Location
City
State Jammu And Kashmir
Key Dates
Publish Date 23 Sep 2021
Submission Date 13 Oct 2021
Open Date 13 Oct 2021
Finance
Tender Value 22 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
2702788_Boq_2.xlsx
1bd5776d-e2da-4478-b9c9-9c25483364ef.pdf
2702788_Boq_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 23, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 13, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 13, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xlsx

2702788_Boq_2.xlsx

pdf

1bd5776d-e2da-4478-b9c9-9c25483364ef.pdf

pdf

2702788_Boq_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders