Bids Are Invited For Lcr Meter ( Digital ) Handheld - Abs• Display :20 X 2 Characters Lcd With Back - Lighttest Signal• Signal Frequency :100Hz, 120Hz, 1Khz• Output Impedance :Varied With Different Range• Signal Level:0.3Vrmsmeasurement Display Range•

Sharing tender

Bids Are Invited For Lcr Meter ( Digital ) Handheld - Abs• Display :20 X 2 Characters Lcd With Back - Lighttest Signal• Signal Frequency :100Hz, 120Hz, 1Khz• Output Impedance :Varied With Different Range• Signal Level:0.3Vrmsmeasurement Display Range• Izi, R :0.001O-99.999Mo• C :0.1Pf - 99999Μf• L :0.1H - 9999H• D :0.0001-9999• Q :0.0001-9999 , 70 Mhz Mixed Signal Oscilloscope ( 4 Analog + 16 Digital Channel ) - Sample Rate , It Should Also Have At Least 26 Nos Automatic Measurements And 6 Bits Hardware Counter, Advance Serial Bus Trigger And Decoding Functions Including Rs232 / Uart, I2c And Spi, Multi Triggering Facility, Math Functions Like A+B, A-B, A×B, A / B, Fft, A&&B, A||B, A^B, !A, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs.7 Inches Wvga Tft Display, Computer Interface Usb Host And Device And Lan. , Multi Function Test & Measuring Tool For Field Applications And Testing Compatible With Laptop - • 10X Probe : 220 Mv - 20 V / Divbuffer Memory Size• One Channel In Use: 1024 Kb• Two Channels In Use: 512 Kbtime Base : 1 Ns / Div To 100 Ms / Divtrigger Modes : Normal, Auto, One Shot, Single, Ch1, Ch2trigger Threshold• Basic Triggers: External / Ch1 / Ch2 / Alternative Rising Edge / Falling Edge / Auto / Normal / Single• External Trigger Bandwidth : 300 Mhz , Digitalictrainer - Technical Specifications:• Size Of Breadboard :172.5 Mm X 68Mm• Dc Supply:+5 V, 500 Ma• Clock Frequency :1 Hz, 100 Hz, 1 Khz, 100 Khz• Amplitude:3.3V ( Ttl ) • Duty Cycle:50 %, Ttl Output• Pulsar Switches :2 Nos.• Graphical Lcd :128 X 64 Dots• Data Switches :8 Nos. ( Toggle Switches For Both Ttl Modes ) • Led Display:8 Nos. ( Ttl ) • Seven Segment Display:3 Nos.• Main Supply :100V - 240V Ac, 50Hzthe Training Should Include Online Single User Classroom / Laboratory Teaching, Learning And Simulation Software Module On Digital Electronic:The Content Should Designed By Using Platforms Like Visual Basic, Dot Net, Flash Etc. The Module Should Comprises Simulations, Animations, Videos, Graphs, Charts, Along With Mandatory Rich Content And Theory To Understand Fundamental Concepts, Interactive Learning Objects, Faq, Mcq, Notes And Questions Bank.Etc Of Digital Electronic. Digital Electronic To Understand Fundamental Concept Of Measuring Instruments: Oscilloscope, Multimeter, Digital Electronics, Number Systems, Codes, Complements, Boolean Algebra, Logic Gates, Arithmetic Circuits: Adder, Subtractor, Combinational Circuits: Multiplexer, De Multiplexer, Encoder, Decoder, Sequential Circuits ( Flip-Flops ) : S-R Flip-Flop, D Flip-Flop, J-K Flip-Flop, T Flip-Flop, Registers And Counters. , Smd Technology Kit - It Should Have Following Technical Specifications:• Smd Identification Board• The User Should Familiarized With Different Smd Components Resistors, Capacitors, Inductors, Diodes, Transistors & Ic’S Packages.• Proto Boards Are Special Pcb’S With Readymade Solder Pads For Various Smd Components & Ic’S, Which Makes The Soldering Much Easy. It Includes Through Hole, Sop, Chip Scale Package Proto Boards.• Smd Soldering Jig• Smd Soldering Iron For Soldering Practice.• A Variable Temperature Controlled Soldering Iron Is Supplied With Lead.• Smd Components Are Supplied For Solder Practice .I.E., Resistor, Capacitor, Diode, Transistors• Tweezers For Holding & Placing Of Smd Components. , Electronic Circuit Simulationsoftware With Five User Licenses - The Software Should Have Facility Of Circuit Simulation And Pcb Design Of Analog, Digital And Mixed Electronic Circuits With Their Pcb Layouts. All User Perpetual License Of The Software Should Support Either The Digital Online Access, And Simulation Or The License Protection Should Be Supported Through Usb Hardware Dongle And Have Facility To Upgrade In Future. Pcb Design: Create Multilayer Pcb Layouts Of Circuits, With Automatically Placed And Routed Components. All Components In Software Should Be “Pcb-Ready” And Have Associated Footprints Which User Can Review And Change On A Component Spreadsheet. It Should Also Have 3D Capability To Preview The Physical Parts Already On The Schematic Diagram With Run Time Animation In 2D And 3D View, Visualizations Of Pcb Design With Enclosures In 3D, 3D Printer Support, Importing Footprints In 2D And 3D In Industry Standard Formats. Pcb Design Software Should Support Both G Code And Gerber Generation Of The Data. , Analog Component Trainer Withnecessary Dc / Ac Power Supply: Sine, Square, Trianglemodulating Signal Generator And Simulation Software - 300Mhz 2 Channel Oscilloscope• Function & Arbitrary Waveform Generator With Sine 50Mhz, Square 15Mhz, Triangle 100Khz, Am-Fm Modulation • 300Mhz Spectrum Analyzer• Frequency & Phase Meter• Pattern Generator• 16 Channel Logic Analyzer• Data Recorder• Usb Powered • Interactive Virtual Graphical User Interface Software • Separate Window For Every Instrument Technical Specifications ( Oscilloscope ) :• Bandwidth: 300Mhz • Rise Time : 2.5 Ns• Input Channels : 2• Vertical Resolution: 8 Bits• Input Characteristics: 1 M In Parallel With 5 Pf• Input Type : Single–Ended, Bnc Connector• Input Coupling : Software Selectable Ac / Dcsampling Rate ( Each Channel ) • Real / Per Channel: 125 Mhz• Effective / Per Channel: 100 Ghzvertical Sensitivity• 1X Probe : 2 Mv - 2 V / Div• 10X Probe : 220 Mv - 20 V / Divbuffer Memory Size• One Channel In Use: 1024 Kb• Two Channels In Use: 512 Kbtime Base : 1 Ns / Div To 100 Ms / Divtrigger Modes : Normal, Auto, One Shot, Single, Ch1, Ch2trigger Threshold• Basic Triggers: External / Ch1 / Ch2 / Alternative Rising Edge / Falling Edge / Auto / Normal / Single• External Trigger Bandwidth : 300 Mhz Total Quantity : 1