Military Engineer Services-MES has published Repair / Maint Of Internal Electrification With Fitting / Fixure Of Otm Accn Of Zone D At Mil Stn Sri Ganganagar Repair / Maint Of Internal Electrification With Fitting / Fixure Of Otm Accn Of Zone D At Mil Stn Sri Ganganagar. Submission Date for this Tender is 28-10-2021. Electrification Work Tenders in GE Sri Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-10-2021 |
| 2 | 23-Oct-2021 | amd | Date | 28-10-2021 |
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in -Charge. |
| 2 | M & Lfor concealed conduit point wiring complete for light on independent /combine boardwith cable 1.5 sqmm (Nominal area) FRLSPVC insulated multistranded unsheathed copper conductor,drawn in and includingPVC Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinking"s for sunkencast iron/ pressed steelterminal boxes 60mm deep ,suitable lengthand 1.2 mm thickness for mounting, switches, sockets,fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith brass screwed and cup washers, dulygrouting and painted with red oxide metal primer and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddirecedby the Engineer in charge.( Make- Finolex/Anchor/Havells) |
| 3 | All as per Srl item No -02 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in -Charge. |
| 4 | All as per Srl item No -02 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in -Charge. |
| 5 | All as per Srl item No. 2 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in -Charge. |
| 6 | All as Srl item No. 02 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in -Charge. |
| 7 | All as per Srl item No. 2 here in before but for call bell point complete all as specified and directed by Engineer - in -Charge. |
| 8 | M & Lfor concealed existingconduit point wiring complete for light/ fan on independent /combine boardwith cable 1.5 sqmm (Nominal area) FRLSPVC insulated multistranded unsheathed copper conductor,drawn inPVC existing Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , and sinking"s for new sunkencast iron/ pressed steelterminal boxes 60mm deep , switches, sockets,fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith brass screwed and cup washers, dulygrouting and painted with red oxide metal primerincluding provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddirecedby the Engineer in charge. ( Make- Anchor/Havells) |
| 9 | All as per Srl item no -08 here in before but for one switch socket combination 5/6 Amps on independent board complete all as specified and directed by Engineer - in -Charge. |
| 10 | All as per Srl item No -08 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in -Charge. |
| 11 | All as per Srl item No. 8 here in before but for one socket outlet 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer - in -Charge. |
| 12 | All as per Srl item No. 8 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in -Charge. |
| 13 | All as per Srl item No. 8 here in before but for call bell point complete all as specified and directed by Engineer - in -Charge. |
| 14 | S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in -Charge. |
| 15 | S & F switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in -Charge. |
| 16 | S&F bell push flush type 5 Amp complete all as specified and directed by Engineer – in -Charge.) |
| 17 | S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in -Charge. |
| 18 | S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in -Charge. |
| 19 | S & F switch socket combination 6 Pin, 15/16 Amps flush type complete all as specified and directed by Engineer - in -Charge. |
| 20 | S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in -Charge. |
| 21 | S & F in replacement Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complteall as specified and directed by Engineer - in -Charge. |
| 22 | S & F in replacement modular switch5/6 Amps single pole one way,one module complete all as specified and directed by Engineer - in -Charge. |
| 23 | S & F in replacement modular switch socket combination 5 pin, type 5/6 Amps5 in 1flush type including modular cover plate with frame complete all as specified and directed by Engineer - in -Charge. |
| 24 | S & F in replacement modular switch socket combination 6 Pin, 5/16 Amps flush type including modular cover plate with framecomplete all as specified and directed by Engineer - in -Charge. |
| 25 | S & F in replacement modular switch5/6 Amps single pole two ways complete all as specified and directed by Engineer – in -Charge. |
| 26 | S & F in replacement modular socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in -Charge. |
| 27 | S&F in replacement modular bell push 5 Amp complete all as specified and directed by Engineer – in -Charge. |
| 28 | S & F in replacementmodular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in -Charge |
| 29 | S & F ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified and directed by Engineer - in -Charge. |
| 30 | S & F in replacement of existing light fitting withLED batten with aliminium housing andintegrated electronic driver,20/22 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connectorcomplete all as specified and directed by Engineer - in -Charge. (Make:Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part no.: BCLSBAL 20W CW ,Philips Cat part No. BN021C LED22S PSU CW GR or equivalent as approved by GE |
| 31 | S&F in replacement of existing warm light (yellow/golden color) fitting withLED batten with aliminium housing andintegrated electronic driver,16 watt having input voltage AC90-300V, 50 Hz ,color temp 4000K, and all other accessories including connection with flexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connectorcomplete all as specified and directed by Engineer - in -Charge. (Make:Syska cat part No: SSK RA 1601-N-4000Kor equivalent as approved by GE |
| 32 | S&Fin replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in -Charge(Make:Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH,Philips Catpart No. BRP042PLED25CWSLEPSUGR DX) or equivalent as approved by GE |
| 33 | S & Fin replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in -Charge. |
| 34 | S & Fin replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in -Charge(Make:Havells cat part no : HEXAFT10WLED857SSYMBOPC, Bajaj cat part no. BIBWP 10W LED,Philips Cat part No. WT202W LED6S CW PSU S2 PC) or equivalent as approved by GE |
| 35 | S&Fin replacement decorative wall light,brushed nickle finish fiturewith oOPAL glass diffuser including 4 watt LED filament lamp E14 base complete all as specified and directed by Engineer - in -Charge( make- havells cat part no: LHFOAIC1TZ1I040or equivalent as approved by GE |
| 36 | S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified. (Make : Havells cat part no LUMILINEPLUSBS10WLED865SPCSS, Bajaj cat part no. BCLSB 10 WH, Philips Cat part No. BN021 LED12S 6500 PSU GR) or equivalent as approved by GE |
| 37 | S & F speed regulator for ceiling fan 1200/1400mm sweepcomplete all as specified and directed by Engineer - in -Charge |
| 38 | S&F in replacementrecess mounting 2 X 2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs,seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed by Engineer - in -Charge.Make:Crompton cat part no :LCTLRNE-36-FO-CDL or equivalent as approved by GE |
| 39 | S&F in replacement Recessed mounted bottom opening LED Cleanroom luminaire (1X2)or (1.5 X 2) feet, 28/36/40 W as per site requirement CRCA powder coated housing. SS Frame, IP 54,with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed by Engineer - in -Charge.(Make: Havells cat part no. PLUTO2X1PLR28WLED840S, Crompton cat part no.LCBOR-40-CDL, C&S cat part no.LTCRSLM28WATT1X2 or equivalent as approved by GE |
| 40 | S & F in replacement Round recess mounted LED edge lit slim downlight 12 Wattwith die-cast aluminum housing finished in premium white powder coating. Efficacy 100lm/w complete all as specified and directed by Engineer - in -Charge.Make-Havells cat part no.EDGEPRORDDLR12WLED857S, Bajaj cat part no. BPSLR 12W WH, Crompton cat part no. LSCRM-12W-CDL |
| 41 | Supply and fix in replacement LED flood light 80watt ,protected to IP65 with flat front toughened glass and fixed electronic driver (surge protecter) complete including fixing arrangments in ground / on pole complete all as specified and directed by Engineer - in -Charge .Make-Havells cat part no.-BAYBRITEFLARE80WLED857PWBBOLT G,Bajaj cat part no.BJFL 80W LED I, Crompton cat part no.- LFL-80-CDL/60-M or equivalent as approved by GE |
| 42 | Supply and fix in replacement LEDhighbay luminaire 80W having fin ventilation technology for better thermal management and its cutting edge LED technology seeks to various industrial applicaton complete all as specified and directed by Engineer - in -Charge . Make:-Havells cat part no. ILIOSBAYPLUSHBP80WLED857SP90DTOPC, Bajaj cat part no. BGHB 80W LED G V,Crompton cat part no.-LHB11-80-CDL/60-M or equivalent as approved by GE |
| 43 | Supply & fixing in replacementLED land scape light/bollard light 10W/9 W with 900mm height extruded aluminium cylindrical section housing IP-65 rated complete with base & log bolt grafite grey epoxy cationic powder coated all accessories all as specified. and directed by Engineer - in -Charge . Make:-Crompton cat part no- LBLSR-10-WW,Bajaj cat part no-BGBOM 650 9W LED or equivalent as approved by GE |
| 44 | S & F in replacement LEDsuspension light fitting 36 W (Fixture size : (LxWxH) in 1136x54x74 mm), aluminum extruded direct-indirect light effect gives homogenous light distribution effect & enhances the visual comfort with joining kitaccessoriesand connecting to mains cable complete all as specified and directed by Engineer - in -Charge. ( Make : Havells cat part No. - DESTELLODILP36WLED857SPMMAWH, Crompton cat part No.- LCLP54-36-CDLor equivalent make in Bajaj |
| 45 | S&F in replacement post top lantern LED type60/70 Watt including fixing arrangments on 76 mm dia GIpipe on main gate pillers 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.complete all as specified and directed by engineer in charge.(Make : Havells cat part no. CORALMAXIPT70WLED830PSYMTOPC,Crompton cat part no. LPTO-60-CDL-M or equivalent as approved by GE |
| 46 | S&F LED lamp 9W, White/Red/Yellow/Blue/Green color for angle holder complete all as specified and directed by Engineer - in -Charge. |
| 47 | S&F LED adore lamp 0.5 WB22 Red/Yellow/Blue/Green color/Orange complete all as specified and directed by Engineer - in -Charge. |
| 48 | S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in including PVC conduitincluding 6.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor including necessary connections, PVCflexible pipes are used in pannel board while connecting the cablecomplete all as specified and directed by Engineer - in -Charge.(Note : PVC cable and PVC conduit shall be ISI marked)( Make of cable - Anchor/Havells) |
| 49 | S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 4 sqmm (Nominal Area) FRLS stranded copper conductor drawn inexistingPVC conduictincluding 4.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor including necessary connections, PVCflexible pipes are used in pannel board while connecting the cablecomplete all as specified and directed by Engineer - in -Charge.(Note : PVC cable and PVC conduit shall be ISI marked)( Make of cable - Anchor/Havells) |
| 50 | S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in -Charge. ( Siemens/Havells / Legrand ) |
| 51 | S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in -Charge. ( Make : Siemens/Havells / Legrand) |
| 52 | S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. (Make -Siemens/Havells / Legrand ) |
| 53 | S & F in repairsMCB ‘B’ series type suitable for 240 volts, AC supply5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. (Make - Siemens/Havells / Legrand) ) |
| 54 | S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 VoltISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A,Isolators and including give connection with wire and cable etc complete all as specified and directedby engineer -in-charge(Make -Siemens/Havells / Legrand) |
| 55 | S&F in repairs MCCB TP&N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Siemens/Havells / Legrand)) |
| 56 | S&F in repairs MCCB TP&N 40 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Siemens/Havells / Legrand) |
| 57 | S&F in repairs MCCB TP&N 100 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. (Make -Siemens/Havells / Legrand)) |
| 58 | M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GIand protection by provisionof GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge |
| 59 | Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cablescomplete all as specified and directed by Engineer - in - Charge |
| 60 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer - in - Charge |
| 61 | Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed by Engineer - in - Charge |
| 62 | Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer - in - Charge |
| 63 | Supply and lay standard size bricks subclass B typecomplete all as specified and directed by Engineer - in - Charge |
| 64 | S & F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or circular 4 sqmm,complete all as specified and directed by engineer in charge. |
| 65 | Supply and lay in replacement jointing and testing and commissioning in replacement of 10 Sqmm x4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge. |
| 66 | Supply and lay in replacement jointing and testing and commissioning in replacement of 25 Sqmm x4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge. |
| 67 | M & L for Air termination,single pointed, Aluminium rod 12 mm dia and 300 mm long complete all as specified and directed by engineer in charge. |
| 68 | M & L for providing test point terminal block, made out of Gun metal or Phosphors bronze,of Size 75 mm X 75 mm X 25 mm drilled and screwed including 03 Nos 8 mm dia, 25 mm long hexagonal head screws complete all as specified and directed by engineer in charge. |
| 69 | M & L for Aluminium strip 25 mm X 3.15 mm with saddles and fixing screws etc as in roof conductors and down conductor above ground complete all as specified and directed by engineer in charge. |
| 70 | M & L for GI strip 32 mm X 6 mm buried in ground complete all as specified and directed by engineer in charge. |
| 71 | M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI Strip 32 X 6 mm as earthing lead ,by means of bolts,nuts and washers of GIand protection by provisionof GI medium grade pipe 50 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge |
| 72 | M & L for GI water tubing,light grade,50 mm,1.2 m long duly threaded on one side in and including fixing of GI socket for fixing of Air termination and including FI clamp of 50 X 6 mm bend to shape for fixing of GI pipe post and fixed to wall (GI pipe 1.2 m will be in single length and no joint will be allowed) |
| 73 | S&F exhaust fan made of sturdy engineering plastic of 250mmsweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVCsheathed copper conductorflexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.(Make : Havells/Orient/Crompton) |
| 74 | S&F in replacementpressure booster pump suitable for 1-2 bathroom CMB tank, power (kw) (0.3), flow 2400 LPH m, head maximum (Mts 27), max pressure 2.7 Bar, Pressure tank size 24 L, Pump body stainless steel with copper winding complete all as specified and directed by engineer in charge. |
| 75 | S&F in replacement water pressure tank capacity 24 L for pressure booster pump , spacification as item no 74complete all as specified and directed by engineer in charge. |
| 76 | S&F in replacementpressure switch-060-113391, R: 0.2 to 7.5 Bar, D: 0.7 to 4 Bar, IP 30 suitable for water pump as mentioned in item no 74 complete all as specified and directed by engineer in charge. |
| 77 | Note :(i) Amount ofcreditfor retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. (ii)Contractor will furnish the performance warranty certificate along with name of dealer from the manufacturer for a specified period as recmmended by the companyfor the equipments mentioned againstrespective items. (iii) All LED lights should be marked with GE SGNR and date of fixing.(iv) The contracotr will liable for penalty of Rs 500/day if he fail to interain the complaint given to him on next day |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
