Maintenance Of Link Road From Khair Tantigaon Road To Arni.
Tender Value
13.96 Lakhs
Estimated cost
Bid Submission
28 Sep 2021
0 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khair → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Link Road From Khair Tantigaon Road To Arni.
BOQ
| Sl. No. | Item Description |
| 1 | Providing laying spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with smooth wheel rollor 80-100 KN in stages to proper grade and camber applying and brooming stone screening to fill-up the interstices of coarse aggreates,watering and compacting to the required density grading-3as per technical specification clause 405.(3) |
| 2 | Providing and applying primer coat with bitumenVG-10on prepared surface of granular base including cleaning of road surface and spreding primer at the rate of 0.70kg/sqm using mechincal means before Applying prime coat the surface will be cleaned with air compressor and water will also be sprinkled with water tanker to keep the surface Moist. The prime coat will be applied 24 hrs before the application of bituminous course including all Taxes, Material, Labour, T&P etc. required for proper completion of the work. as per MORD Specification No. 502 |
| 3 | Providing and applying Tack coat with bitumenVG-10using bitumen pressuredistriutor at the rate of 0.30kg/sqm on the prepared primed granular/old painted surface, cleaned with Machanical broom including all Taxes, Material, Labour, T&P etc. required for proper completion of the work, as per MORD specification No. 503 (Rates Including of Bitumen VG-10) |
| 4 | Providing and laying & rolling of open graded premix carpet of 20mm thickness composed of 13.20 to 5.60 mm aggregates including mixing in a suitable plant, laying with a three wheele 80-100KN static Rooler capacity, finished to required leve & grades Bitumen @ 14.6Kg/10Sqm agea for premixing including Taxesx, Material, Labour and T&P etc required for proper completion of the work as per MORD specification No. 508 ( Rates including of Bitumen VG-10) |
| 5 | Providing and laying Seal Coat type C over P.C. surface with 6.7mm nominal size grit @ 0.90cum/10sqm with bitumen VG-10 @ 6.50 Kg/10sqm including heating of bitumen to the required tempreture and including all material labour & T&P etc. complete & Per. MORD specification No. 510(Rates including of Bitumen VG-10) |
| 6 | Brick Solingwith M-150 bricks laid onedge & dry brick edgingon both side including preparation of subgrade to required camber and including supply of bricks filling joints with local earth spreading a blind coat of 1cm depth of local earth P.I. 5 to 7 or sand over the entire surface and including labour& T&P etc. required for proper completion of work or slop as per direction of E/I |
| 7 | Earth work in cutting in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slops and also including lift 1.50m and lead 30m the earth from cutting to be used in making embankment or to be deposited asspoil banks within 50m distance as directed by the E/I excluding royality. S.I. No 253 (a). |
| 8 | Laying of C.C.road in 1:5:3 cement C.sand & stone gritincluding supply of all materials labour and T&P etc. required for proper completion of work. |
| 9 | Supply and laying 125micron polythene sheet in position including supply of all materials labour and T&P etc. required for proper completion of work. |
| 10 | Providing and fixing bitumen mix filler 1Cm width in C.C Joint including supply of all materials labour and T&P etc. required for proper completion of work. |
| 11 | Supply and Fixing M.S. Sign Board as per drawing and design by E/I |
AI Tender Summary
Tender Timeline
Sep 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender