Directorate of Technical Education and Training has published Bids Are Invited For Ss And Sc Centre Lathe ( All Geared ) With Minimum Specification - Ss And Sc Centre Lathe ( All Geared ) With Minimum Specification, Centre Height 150 Mm And Centre Distance 1000 Mm Along With 3 & 4 Jaw Chuck, Auto Feed System, . Submission Date for this Tender is 12-10-2021. Coats and Jackets Tenders in Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Title | Item Description |
1 | SS and SC centre lathe (all geared) with minimum specification | SS and SC centre lathe (all geared) with minimum specification, Centre height 150 mm and centre distance 1000 mm along with 3 & 4 jaw chuck,auto feed system, safety guard,taper turning attachment , motorized coolant system, lighting arrangement & standard accessories |
2 | Pillar Type Drilling machine | Pillar Type Drilling machine Sensitive 0 - 20 mm cap. with swivel table motorized with chuck & key. |
3 | Drilling machine bench Sensitive | Drilling machine bench Sensitive 0 - 12 mm cap motorized with chuck and key |
4 | D.E. pedestal Grinding machine with wheels rough and smooth | D.E. pedestal Grinding machine with wheels rough and smooth 2 H.P., 3-Phase, 415 V, 1440 rpm, 2500 dia wheel |
5 | Transformer welding set - continuous welding current, with all accessories | Transformer welding set - continuous welding current, with all accessories and electrode holder 60% Duty Cycle with Standard Accessories 300 A, OCV 60-100V |
6 | Arc welding table (all metal top) with positioner | Arc welding table (all metal top) with positioner 1200 X 1200 X 750 mm |
7 | Oxy - acetylene gas welding set equipment | Oxy - acetylene gas welding set equipment with hoses, Oxygen & Acetylene cylinders, regulator and other accessories |
8 | Gas welding table with positioner with Fire Bricks | Gas welding table with positioner with Fire Bricks 900 X 600 X 750 mm |
9 | Compressor unit Suitable for pressure | Compressor unit Suitable for pressure : 8bar, Delivery 50lpm (or more), reservoir capacity : 24 liters (or more) 230V, 50 Hz, with pressure regulator and water separator. |
10 | Pneumatic trainer kit | Pneumatic trainer kit consisting of the following matching components and accessories : I) Single acting cylinder II) Double acting cylinderIII) 3/2 way valve Manually, actuated, Normally, closedV) One way flow control valve VI) 5/2 way valve With manually- operated switchVII) 5/2 way valve Pneumatic, actuated, spring returnVIII) 5/2 way pneumatic actuated valve Double pilotIX) 3/2 way roller level valve Direct actuation normally closedX) Shuttle valve(OR) XI) Two Pressure Valve (AND)XII) Pressure Gauge 0 - 16 barXIII) Manifold With self-closing NRV, 6-WAYXIV) Push button station for electrical signal input With 3 illuminated momentary contract switch (1 no + 1 NC) and with 1 illuminated maintained contact switch (1 No + 1 NC) contact load 2 A XV) Relay station With 3 relay each with 4 contact sets (3 No + 1 NC or change over type), 5AXVI) 3/2 way single solenoid valve With LEDXVII) 5/2 way single solenoid valve With manual override and LED XVIII) 5/2 way double solenoid valve With manual override and LEDXIX) Power supply unit Input voltage 85_265 V AC, output voltage, 2u V DC, output current : max 4.5 A, short- circuit- proofXX) Profile plate, Anodised aluminium 1100 x 700 mm, with carriers mounting frames and accessories (TO01 sets be fitted on the pneumatic workstation |
11 | Pneumatic work stationwithwooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide. | 1.Work table sizeL1200 mm x W900 mm x H900 mm. With four caster wheel2. Drawer–size L460 mmxW495 mmxH158 mm each and overall size of drawer unit.L470mm x W495 x H825 mm and |
12 | Carrier formounting components | Carrier formounting components, such as PB & relay boxes |
13 | Cut section model for pneumatic component | Cut section model (01 each from the followings)1. Single acting cylinder 2. Double acting cylinder3. 3/2 way valve4. One way flow control valve5. 5/2 way valve6. 3/2 way roller lever valve7. AND Gate8. Pressure Gauge 9. 6 way manifold10. 3/2 way single solenoid valve 11. 5/2 way double solenoid valve |
14 | Hydraulic trainer kit | I). Hydraulic power pack with (1) external gear pump having a delivery rate of 2.51 pm.(approx.)@ 1400 rpm operating pressure 60 bar, coupled to a single- phase AC MPTOR (230 V AC) having start capacitor and ON/OFF switch and overload protection, 2. Pressure relief valve and adjustable from 0-60 bar, 3. Oil reservoir, = 5 Liters capacity having sight glass. Drain screw, air filter, and P and T ports.II). Pressure relief valve Pilot- operated III). Drip tray,steel Size 1160 mm x 760IV). Pressure Gauge Glycerin damped, indicated range of 0-100 bar V). Four –way distribution With five ports equipped with a pressure gauge V). Four –way distribution With five ports equipped with a pressure gaugeVI). Double acting hydraulic cylinder With a control cam, piston diameter 16 mm, piston rod diameter 10 mm, stroke length 200 mmVII). Suitable weight For vertical loading of hydraulic cylinder VIII). Mounting kit for weight For realizing pulling and pushing load IX). 3/2 way directional control valve With hand lever actuationX). 4/2 way directional control valve With hand lever actuation XI). 4/3 way directional control valve Closed- centre position, with hand lever actuationXII). Non return valve XIII). Pilot operated check valve Pilot to openXIV). One way flow control valve With integrated check valveXV). T- connector with self-sealing coupling nipples (2 nos.) and quick coupling socket (1 no) XVI). Profile plate Anodised aluminium, 100 x 700 mm, with carriers, mounting frames and mounting accessories (to be filled on the Hydraulic work station) |
15 | Hydraulic work station | Hydraulic work stationMetal work surface, and one pedestal drawer unit having 5 drawers, pprox) L-1200 mm x w-900 mm x H- 900 mm. With four caster wheels including two lockable wheels at the front side. 2. Drawer –size (Approx) L-460 mm x w-495 mm x H-158 mm each and overall size of drawer unit. (Approx) L- 470mm x w- 495 x h- 825 mm and 3. Drawer slide height (Approx) 85 mm. |
16 | Cut–section model for hydraulic components. | 1. Pressure relief valve 2. Pressure Gauge 3. Double acting cylinder4. 3/2 way direct directional control valve5. 4/2 way direct directional control valve6. 4/3 way direct directional control valve 7. Non return valve 8. Pilot operated check valve |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail