Muliyar Gp 2021-22 P.No. 171 -Construction Of Mini Mcf In Different Wards Of Muliyar Gp Muliyar Gp 2021-22 P.No. 171 / 22-Construction Of Mini Mcf In Different Wards Of Muliyar Gp, Muliyar Gp-Kerala
TDR : 29295092
Tender Notice
BOQ
Expired
Muliyar Gp
Kerala
Muliyar Gp 2021-22 P.No. 171 -Construction Of Mini Mcf In Different Wards Of Muliyar Gp Muliyar Gp 2021-22 P.No. 171 / 22-Construction Of Mini Mcf In Different Wards Of Muliyar Gp
Work Name:Muliyar GP 2021-22:- P.No. 171/22-Construction of Mini MCF in different wards of Muliyar GP
Sl. No.
Item Description
1
Mini MCF
2
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
3
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5
od1400418/2021_2022 : od1354461/2021_2022 :Supplying cutting in size fixing in position by welding etc for 3 mm dia 2.5 cm c/c or<br>nearest size GI plane bar mash including all cost of priming and painting two coat with synthetic enamal<br>paint
6
51.20 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
7
12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
8
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
9
For Name board
10
od1400481/2021_2022 : od1336488/2021_2022 :Supplying and fitting name boards of size 75 cm x 45 cm. made with G I plain sheets<br>1.25 mm thick (class IIII ) fitted with 35 X35 x 4 mm MS angle 2 Nos horizontally and 3 Nos vertically to make<br>a frame for strengthening the G I sheet , fitted 2 Nos. 32 mm GI pipe vertically 90 cm above from ground level<br>and fixing in cement concrete 1: 2: 4 , 30cm X 30cm X 30 cm. including cost and conveyance of all materials<br>all labour charges, fabricating etc. complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
