}

Repairing Work In Transport Nagar Situated M.N.T Awas H No-6 B Sr No-29 Hari Parwat, AGRA-Uttar Pradesh

Agra Municipal Corporation has published Repairing Work In Transport Nagar Situated M.N.T Awas H No-6 B Sr No-29 Hari Parwat. Submission Date for this Tender is 28-09-2021. Road Cargo Transport Tenders in AGRA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

29286618
Repairing Work In Transport Nagar Situated M.N.T Awas H No-6 B Sr No-29 Hari Parwat
Open Tender
Indian
Uttar Pradesh
AGRA
28-09-2021

Tender Details

Repairing Work In Transport Nagar Situated M.N.T Awas H No-6 B Sr No-29 Hari Parwat

Key Value

Document Fees
INR 200 /-
EMD
INR 22120.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:
Sl. No. Item Description
1Dismantling of R.C.C./R.B work including stacking of material as directed by E/IC within distance of 60 meters.
2Dismantling brick work or stone work in lime or Cement mortar and including stacking of material as directed by E/IC with in a distance of 60 meters (200 feet) but Mud Mortar.
3Dismantling cement concrete or brick or granolithic floors including stacking of dismantled as directed by E/IC with in a distance of 60 meters (200 Feet).
4R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportion 1:1.5:3 for slab work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150.
5Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars).
6Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone) aggregate (20 mm nominal size) and cutting complete including cost of form work. In foundation and floors.
7Providing and laying Vitrified tiles in floor of 600x600 mm size (thickness 10mm), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in desired colour and shades, laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS : 15477 including grouting of joints.
8M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work.
912MM Thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not including 80mm in girth and finished even and smooth. No extra for missing any additive. 1 cement : 4 Coarse Sand.
10Mild Steel and Iron work of small size and section such as holding down woods, hold fasts tierods, grating etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing.
11Providing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dismeter with bitumen and G.I. limpet washers or with G.I. impel washers filled with white lead, including & coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to pitch in horizontal and vertical or curved surfaces), excluding the cost of punins, rafters and trusses and including cutting to size and shape where ever required. 1.00 mm thick with zinc coating not less than 275gm/m2.
12Finishing walls putty approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all materials.
13Finishing walls with exterior emulsion paint (Apex) of approved brand and manufactured and of required shade and undecorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr./10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat.
14Painting two coat other primer on steel with sianth paint including etc all complete.
15Sub Total (A)
16Add 12% G.S.T. of Sub Total (A)
17Sub Total (B)
18Add / Deduction For Estimate Figure Amount Match
19Grand Total
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail