|
| 1 | Note : Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below:- |
| 2 | Surface excavation not exceedig 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 3 | M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for 100 mm thick, Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in floors/ hard standing, etc,laid in panels and finished even andcomplete all as specified and directed. |
| 6 | M&L for Providing precast cement concrete type B1 (1:2:4)using 20 mm graded stone aggregate iset in cm 1:4window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 7 | M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [MAKE:- MEHTAB / NAVYA TILES / SAP PAVERS/ SAGAR TILES] |
| 8 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 9 | S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 10 | S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 11 | Use & waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for fair finished flat surfaces of concrete complete all as specified and directed. |
| 12 | M&L for Reinforced cement concrete design mix M-25 in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. |
| 13 | Removing excavated soil exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 14 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out inany type of soil complete all as specified and directed. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed. |
| 16 | M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid] |
| 17 | Supplying and laying sub class \"B\" bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 18 | Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded,armoured, heavy duty cable with aluminium conductorof size 35 sqmm, 3.5 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE] |
| 19 | S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut, bolt and washer complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE] |
| 20 | M&L forcutting PCC/floor/road for passing out cable and making good, including material as per existing after laying of pipe for cable protection all as specified and directed size of trench not more than 0.30 x 0.30 m completeall as specified and directed by EIC. . |
| 21 | Supply, install including testing & commissioning LT panel board for 415 Volt, 4 wire system cubical type wall mounted indoor type vermin & dust proof fabricated with CRCA sheet of 2 mm thickness factory fabricated totally enclosed complete with bus bar chamber & cable ally, weather proof, hinged cover with gasket complete powder coated (seven tank processed) with approved shade comprising following complete all as specifiedand directed.Incomer:-(a) Copper bus bar with PVC sleeve suitable for 240 Amps for phase & 150 Amps for neutral-01 set(b) Phase indicating lamps LED type (red, yellow, blue)-01 set(c ) VAF+PF Meters, Accuracy class 0.5 with selector switch and CT-1 Set make: DIP/AE/IMP/NSDOutgoing:-(d) MCCB 160 Amps 4 pole 25 KA -01 Nos(e) MCCB 63 Amps 3 Pole 25 KA-03 Nos(f) MCCB 40 Amps 3 pole 10 KA-03 NosMake of MCCB/MCB/Changeover Switch: Standard/Havells/C&S/L&T |
| 22 | S&F MCCB 3 Pole, 415 V, fixed type, 160 Amps with breaking capacity 36 KA, thermal magnetic release type Ics=100% Icu, with adujstable overload setting and adjustable short circuit settings with thermal release range 125-160 mp including spreader terminals and phase barrier complete all as specifiedand directed.Make:L&T (d-sine) Cat No.CM90638OOMO or equivalent in Scheinder/Seimens |
