Bids Are Invited For Reflectance Meter - •Light Source : Long Life Led / Tungsten Lamp•Detector : Sealed Silicon Photo Detector•Diffuse Reflectance : 00.0 To 100.00 With Negative & Over Range Indication, •Display : 3.5 Digit Led ( With Decimal Display -Telangana

Bids Are Invited For Reflectance Meter - •Light Source : Long Life Led / Tungsten Lamp•Detector : Sealed Silicon Photo Detector•Diffuse Reflectance : 00.0 To 100.00 With Negative & Over Range Indication, •Display : 3.5 Digit Led ( With Decimal Display ) •Accuracy : ± 1 %•Accessories : Mgco3 Block As A Secondary Standard, Power Trays, Pressure Plate, Dust Cover, Manual, Plate For Mgo Deposition, Mg Wire, Blue Filter Or Gre•Dimensions : 12 X 8 X 7.5•Weight Net : 3.5 Kg•Operating Voltage : 230 V, 50 Hz, Single Phase, Ac Power Supply , Deep Abrasion Machine For Unglazed Tiles - •Diameter Of Steel Disc : 200 ± 0.2 Mm •Thickness Of Steel Disc : 10 ± 0.1 Mm •Material Of Steel Disc : Mild Steel ( Commercially Grade ) •Speed Of Rotation Of Disc : 75 ± 5 Rpm •Force Applied On Test Specimen : Adjustable Between 5 And 20 Kg In Steps Of 1 Kg. •Motor : 1 / 4 Hp Single-Phase 230 Volts Ac•Counter : 3 Digit Pre-Set Type Electronic Counter With Memory Back Up And Push Button Reset.•Capacity Of Storage Hopper : 5 Liters•Power Supply : 230 Volts, 50 Hz, Single Phase, Ac Supply•Weight : 90-100 Kgs Approx. , Mor Testing Machine - •Platform Size : 300 X 300 Mm ( 30 X 30 Cm ) •Design : Electro-Mechanical•Operation : Quiet And Vibration Free•Controlling System : Ac Variable Frequency Drive With Ac Induction Motor•Load Cell Capacity : 1000 Kgf ( 10 Kn ) •Least Count For Load : 10 Grams•Load Resolution : 0.01 Kg•Test Units : Kg, Kn Selectable•Motor Speed Control : Through Ac Drive•Accuracy : 0.2% Of Full Scale•Can Accommodate : Maximum Tile Size Of 300 X 300 Mm ( 30 X 30 Cm ) •Display : Lcd Display•Controller : Microprocessor Based Controller•Construction : Mild Steel Body•Paint : Powder Coating•Power Supply : 230 Volts, 50 Hz, Single Phase, Ac Supply , Water Bath For Water Absorption - •Construction : Double Walled In Construction•Inner Chamber : Mirror Polished Stainless Steel Material S.S. - 304 Grade•Exterior Body : Mild Steel Material•Paint : Powder Coated In Attractive Shades•Lid Of The Bath : Matt Finished Stainless Steel Material S.S. - 304 Grade•Insulation : Glass Wool Insulation For Minimum Heat Loss•Temp Range : 5 °C Above Ambient To 100 °C•Temp Control : Microprocessor Based Auto-Tune Pid Digital Temp Indicator Cum Controller•Temp, Accuracy : ± 0.5 °C•Temp. Sensor : Pt-100 Sensor•Stirrer : High Speed Stirrer For Uniform Temp Distribution•Stirrer Motor : Electric Motor Of 1 / 20 Hp•Moc Of Stirrer Shaft : Anti - Corrosive Material•Moc Of Propeller : Anti - Corrosive Material•Heating Elements : 04 Kw•Can Accommodate : Test Specimen Up To 300 X 300 Mm ( As Per Bis 13630-2 & Iso 10545-3 Standard ) •Operation On : 230 Volts, 50 Hz, Single Phase, Ac Supply•Supplied With : Vertical Stand Made From Strong S.S. Rod To Place 200 X 200 Mm / 300 X 300 Mm Ceramic Tiles.Stand Will Be Removable: Stirrer Is Fitted On Side Of The Bath, Which Allows Obstruction Free Usage Of Working Area , Moisture Expansion Tester For Ceramic Tiles - •Temperature Ranges : 5 °C Above Ambient To 100 °C•Temperature Control : Auto-Tune Pid Digital Temperature Indicator Cum Controller With An Accuracy Of + 0.5 °C.•Operates On : 230 Volts, 50 Hz, Single Phase, Ac Supply•Power Ratings : 4 Kw•Accommodate : 7 No Test Specimens Of 100 Mm ( L ) X 35 ( W ) Mm•Overall Dimensions : 885 X 480 X 650 ( L X W X D ) Mm , Vee Bee Consistometer For Tiles - • Vibrating Table : 380Mm Long & 260Mm Wide Resting Upon An Elastic Support At An Height Of 305Mm Above The Floor•Start / Stop Switch Cord And A Plug A Holder•Detachable Swivel Arm From Vibrating Table•Graduated Rod Fixed To Swivel Arm•Container With The Lifting Handles•Slump Cone Open At Both Ends With Lifting Handles•Tamping Rod : 16Mm Dia 600Mm Long, Rounded At One End , Bench Magnifier - •Magnification : 3.5X•Body Material : Aluminium•Body Color : Siemens Grey•Illumination Type : Top & Bottom•Illumination : 22W Circular Fluorescent Tube Dia. 216 Mm•Color Temp Of Light : 6500° K•Outer Ring Diameter : 220Mm•Lens Diameter : 148Mm•Lens Material : Optical Glass•Effective Lens Dia : 135Mm•Working Distance : 220Mm•Field Of View : 160Mm•Maximum Head : 390Mm•Vertical Movement : 210Mm•Horizontal Movement : 250Mm•Angle Of Rotation : 360°•Lens Tilt : 90°•Stand Type : Table Top•Size Of Base : 365X285x80mm•Weight ( Kg ) : 9.0 Kgs.•Packing Dimensions : 55X34x33 Cm•Optional. Accessories : 2X Auxillary Lens To Make The Magnification 7X , Gloss Meter - •Accuracy : ± 0.5 Gloss Unit•Repeatability : ± 0.5 Gloss Unit•Display : 3 ½ Digits Lcd•Increments : 0.1 Gloss Unit•Light Source : Monochromatic Semiconductor•Receptor : Photovoltaic Cell•Power : 230 Volt, 50 Hz, Single Phase, Ac Supply•Dimensions : 6 X 4 X 2 Inches•Weight : 1 Kg Total Quantity : 1

Refer document

Refer document

INR 5.30 Lakhs /-