Bids Are Invited For Abrasive Cut Off Machine: - 3 Hp Motor, 1440 Rpm, Manual Model, 10” Diameter Wheel Capable Of Cutting Different Metals Of Various Diametersfully Enclosed , Quenching Tank - Of Mild Steel Used For Different Quenching Medias For Vario-Jammu And Kashmir

Bids Are Invited For Abrasive Cut Off Machine: - 3 Hp Motor, 1440 Rpm, Manual Model, 10” Diameter Wheel Capable Of Cutting Different Metals Of Various Diametersfully Enclosed , Quenching Tank - Of Mild Steel Used For Different Quenching Medias For Various Heat Treated Processes. , Polishing Machines: - Disc Size : 8”Variable Speeds 50-800 Rpm High Torque Pmdc Motor With D.C Drive Corrosion Resistant Fiber Reinforced Coverwater In And Drain , Metallurgical Trinocularmicroscope: - 1. Eyepiece Tube: Inverted Tri-Ocular Eyepiece Tube Leaning Degree Of Tube About 30°Pupil Adjusting Range 53-75Mmbending Light Degree Of Eyepiece Adjustable 2. Plan Field Eyepiece: 10X Plan Achromatic Objectives:10?25?40?100X Total Magnification:1000X3.Machincal Tube Length:About 160Mm4.Same Axis Rough And Slight Moving Adjustable Focusing System With Limitation And Elasticity Adjusting Unit.Up And Down: 30Mm Micro Moving Value: 0.002Mm5.Same Axis Double Layer Machine Moving Carrying Stage: Specification: About 200X152mm Moving Range: 15X15mm6.Diameter Of The Hole On The Moving Stage: ?10Mm, ?20Mm7.Filter: Yellow, Blue, Green8.Illuination Unit: Kele Illumination: 60V / 20W Halogen Lamp, Adjustable Brightness. Power: 220V / 50Hzii ) Outfit:1. Main Body ( Including Tri-Ocular ) : 1Set2. 10X Eyepiece: 2Pc3. Plan Achromatic Objective : 10X, 25X, 40X, 100X 1Each4. Filter: Yellow, Blue, Green 1Each5. 6V / 20W Halogen Lamp 1Pc6. Light Case: 1Set , Pyrometer - Complete Set With Sensors To Measure The Temperature Of 2000 Degree Celsius , Infra Red Thermometer - Temperature Range: –20°C To 400°C Operating Temperature Range: 0°C To 50°C At < 70% Relative Humidity Display Resolution: 1°C.Accuracy: ±2% Of Reading Or ±3°C, Whichever Is Greater @ 18 To 28°C Ambient Operating Temperature.Response Time: 1 Second.Display Resolution On The Meter: 1°C Spectral Response: 6 To 14 Μm Nominal Emissivity: Preset 0.95 Detection Element: Thermopile Field Of View: 65 Mm Diameter Circle At 1000 Mm Range Average Battery Life: 100 , Thermocouple - Range 0-200 Degree C. Accuracy + / - 1% Of The Range Complete With Sensors , Heat Treatment Furnace - Size Of Working Chamber 4” X 4” X 9”Temperature Range 0-1200°Cpower 230 Volts, 50 Hz, Single Phasematerial Of Construction: Mspaint Power Coated , Compression Mounting Press - Mount Size 1 To 2 Inchforce Pneumaticmold Cylinders Singleincoming Pressure Range: Max 95 Psiheater Specification 800 Wattsthermostat Range Max 300 Degree Ccooling System Waterelectrical Specifications: 110 Or 220 V ( 50 / 60 Hz ) Dimensions: 340X 420X 495 Mmapprox Weight: 35 Kgrecirculating Tank ( 16 Gallon ) With Pum ( Optional ) , Belt Grinding Machine - This Equipment Is Used For Rough Grinding Of The Specimen.Single Belt: 102 X 914 Mmelectrical Specification : 110 / 220 V 50 / 60 Hzconstruction: Aluminium Casting / Fabricated Metaldimension ( Wxdxh ) : 510X630x375 Mmapprox. Weight %3 Kg , Universal Table - • For Experimentally Verifying The Laws Of Triangle, Parallelogram And Polygon Of Forces.• Equal Circular 40Cm Dia Aluminum Disc, Graduated Into 360 Divisions ( Degree ) Complete With Leveling Screws Clamping Device To Fix The Table At Any Desired Angle, 5 Sliding Clamp Pulleys Central Ring String And Five Sets Of Iron Nickelled Slotted Weights And One Hanger Of 15Gm Each.• Complete With All Optional Accessories , Parallelogram Law Of Forces Apparatus - • A Wooden Board 50X60cm With Wall Brackets, Two Frictionless Clamp Pulleys, And Three Set Of Slotted Weights Of Nickelled Each Set Containing Nine Weight And One Hanger Of 50Gms• Complete With All Optional Accessories , Polygon Law Of Forces Apparatus - • Consisting Of Wooden Board Of 70X70cm Size, Provided With Two Wall Brackets And 4 Adjustable Frictionless Aluminum Pulleys And 5 Set Of Slotted Iron Nickelled Each Set Containing 9 Weight And One Hanger Of 50Gms.• Complete With All Optional Accessories , Simply Supported Beam Apparatus - • Span Of 1.0M Consisting Of 2 Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Bar With Steel Back Plate. Completed With Stirrups, Hooks And Two One Kg Weights.• Complete With All Optional Accessories , Friction Slide Apparatus - • Consisting Of A 15X60cm Wooden Board With A Glass Top Hinged On A Iron Base To Which A Sector With Graduated Arc And Vertical Scale Is Provided. The Plane May Be Clamped At Any Angle Up To 60.A 5Cm Frictionless Pulley Is Attached To The End By Means Of A Clamp Adjustable To Any Necessary Position. One Set Of Three Wooden Carriages With Different Bottom Surface ( Wooden, Glass, Iron ) • Complete With All Optional Accessories , Worm And Worm Wheel Apparatus - • Consisting Of A Machine Cut Worm Gear Of 25Cm Dia Carrying A Metal Drum Of 12Cm Dia And Machine Cut Worm On Steel Spindle Carried 12Cm Dia Pulley. The Whole Arrangement Is Fixed On Heavy Cast Iron Bracket Capable To Be Fixed To A Wall. Complete With Effort Pulley, String And Hooks• Complete With All Optional Accessories , Screw Jack - • All Metallic Construction Accurately Machine Cut Screw With V Pitch Of 5Mm Carrying Double Flanged Turned Table Of About 20 Cm Dia.Fitted On A Heavy Cast Iron Base And Complete With 2 Adjustable Pulleys, Cord And Hooks.• Complete With All Optional Accessories , Winch Crab Single Purchase - • Fitted With Heavy Cast Iron Ball Brackets. The Grooved Wheel Is Of 25Cm Dia And Gears Are Machine Cut. • Complete With All Optional Accessories , Winch Crab Double Purchase - • Fitted With Heavy Cast Iron Ball Brackets. The Grooved Wheel Is Of 25Cm Dia And Gears Are Machine Cut. Double Set Of Gearing Arrangements.• Complete With All Optional Accessories , Moment Of Inertia Of A Fly Wheel Apparatus - • 20Cm Dia Comprising Of Carefully Machine And Balanced Cast Iron Wheel And Steel Spindle In Support On Ball Bearing In Strong Iron Bracket .The Wheel Is Smoothly Painted Black And Is Marked With A Line.A Pointer Is Fixed To One Of The Brackets. Diametric Hole Is Drilled In The Shaft To Takea Pin And Cord The Base Is Provided With Holes So That The Apparatus Can Be Fixed To Wall • Complete With All Optional Accessories , Simple Jib Crane - • Consisting Of A Tubular Compression Balance Pivoted About An Axis And Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Complete Wooden Base With 1.2M Jib.• Complete With All Optional Accessories , First System Of Pulley Apparatus - • Complete Wall Fixing Set With 5 Nos Of Single Pulley.• Complete With All Optional Accessories , Second System Of Pulley Apparatus - • Complete Wall Fixing Set With 2 Nos Of Triple Pulley Block.• Complete With All Optional Accessories , Slotted Weight - • 50 Gm, 100 Gm, 200 Gm, 500 Gm 1 Gm, 2 Gm , Searls Apparatus - • Consisting Of Two Metallic Frames Suspended From A Rigid Support With The Help Of Experimental Wire And Compensating Wire.• Slotted Weights With Hanger• Spirit Level• Spherometer• Cross Bar• Complete With All Optional Accessories , Hydraulic Bench With Apparatus / Accessories - Strictly As Per The Uploaded Bid Document , Vernier Caliper ( A ) - Hardened Stainless Steel Construction With Satin Chrome Finish, Four Way Measurement Capability For Outside Dimension, Inside Dimension, Depth And Step Measurements. 50 Mm Jaw Depthl.C:0.02Mm, Range 0-150 Mm , Vernier Caliper ( B ) - Hardened Stainless Steel Construction With Satin Chrome Finish, Four Way Measurement Capability For Outside Dimension, Inside Dimension, Depth And Step Measurements. 50 Mm Jaw Depthl.C:0.02Mm, Range 0-200 Mm , Digital Vernier Caliper, - Advanced Onsite Sensor, Absolute Scale Digital Caliper, 0-6 Inch Range, Water Prooflcd Readout And Function Control Buttons On The Calliper Face, Including Origin To Set And Retain The Original Measuring Point, And Zero / Abs ( Absolute Scale ) To Zero-Set The Lcd Display , Vernier Caliper ( C ) - Hardened Stainless Stee Construction With Satin Chrome Finish, Four Way Measurement Capability For Outside Dimension, Inside Dimension, Depth And Step Measurements. 50 Mm Jaw Depthl.C:0.02Mm, Range 0-300 Mm , Gear Tooth Vernier Caliper - For Measuring Gear Tooth Thickness Of The Primary Diameter With Fine Adjustment, With Certificate Of Calibration, L.C: 0.02 Mmrange 1-26 Module, 2 Scales, Wooden Box , Outside Micrometer ( A ) - L.C: 0.01Mm ( 0-25 Mm ) , Vernier Scale In Metric Units, Baked-Enamel Finish, Stain Chrome Finish On Thimble And Sleeve, Carbide Facing On Spindle And Anvil , Outside Micrometer ( B ) - L.C: 0.01Mm ( 0-50 Mm ) , Vernier Scale In Metric Units, Baked-Enamel Finish, Stain Chrome Finish On Thimble And Sleeve, Carbide Facing On Spindle And Anvil , Disc / Flange Micrometer - Disc Shaped Faces With Flanges For Measuring The Pitch Of Gear Teeth Range: 0-25Mmresolution: 0.001 Mm, Accuracy:+_ 4Micro Meter, With Ratchet Stop For Constant Force, Supplied In A Fitted Plastic Case , Plunger Dial Gauge Indicator - Compact Dial Indicators With Bezel Diameters Of 40 Mm , Range 5Mmgraduation:0.01 Mmdial Reading: A Plus Or Minus 0-100, Measuring Force 1.4 N Or Less , Lever Dial Gauge - Range 0.8 Mm, Reading 0.01 Mm, Graduation: 0-40-0 , Magnetic V- Block - 4, Size 100X95x70 Mm , Flexible Dial Stand - Magnetic Base With On / Off Switch With Fine Adjustment Dovetail Groove For Test Indicator, Material Steelsize: 27 X 10 X 8 Cm , Feeler Gauge Set ( Pack Of 32 ) - Made Of Hardened Alloy Steel 0.03 To 1 Mm, Quantity Of Leaves 32 , Screw Pitch Gauge - Stainless Steel Material, Range:0.25Mm To 6 Mmno Of Leaves 32 , Radius Gauge - Size:1Mm To 7 Mmnickel Plated Case And Locking Screw For The Checking Of Sectors Of Circle. , Tool Maker Microscope - Observation Tube :Monocular Inclined At 45° With Reticle Of Cross Linemicro Work Stage: Highly Accurate Linear Cross Rollers Guided Micro Work Stage Size 150 X 150 Mm With Least Count 0.001 Mm. Travel Of Stage: 50 X 50 Mm On X And Y Axis By Micrometer 0 To 25 Mm L.C. 0.001 Mmillumination: 6 V - 20 W Halogen Light With Highly Precise Condensing System Built In Green Filter. Work Distance 67 Mm. Maximum Work Height :90 Mm. Maximum Weight Capicity:10 Kg. Field Of View : 6.5 Mmstandard Accessories :Ply Wood Box, Projection Lamp 2 Nos., Calibration Certificate, Operating Manual.Optional Accessory :V-Block / Center Holding Device / Digital Read Out With Different Options / Rotary Table / Projection Lamps , Sine Bar - Made Of Iron, Size: 889 X 140 X 203 Cm , Center Distance Between Rollers Is Within +_ 0.005 Mm. , Bevel Protractor - Angle Range 0-360 Deg, Provided With One Fixed Blade And Other Movable Blade. , Universal Bevel Protractor - High Precision Instrument For Accurate Angle Measurement On Machines, Moulds And Jigs, Can Be Attached To Height Gages, Balde Length 150, 300 Mm, Graduation : 5 Feet , Engineering Drawing Models - • Rectangular Prism• Rectangular Pyramid• Triangular Prism• Triangular Pyramid• Square Prism• Square Pyramid• Pentagonal Prism• Pentagonal Pyramid• Hexagonal Prism• Hexagonal Pyramid• Octagonal Prism• Octagonal Pyramid• Decagonal Prism• Decagonal Pyramid• Cube 20 X 20 Cm• Skeleton Cube 20 X 20 Cm• Cone• Sphere 15 Cm• Half Sphere• Cylinder• Semi-Cylinder• Quarter-Cylinder• Tetrahedron• Octahedron• Circle• Double Cross•Single Cross• Model Plates ( Set Of 7 ) Dissected Solids• Cube Cut In Two Right Angles• Sphere 10 Cm Dia Cut In Two Hemispheres• Cylinder Cut In Two Semi-Cylinders• Cone Cut At An Oblique Angle• Pyramid Triangular Cut In Two Parts• Triangular Prism Cut In Two Parts Parallel To Base• Tetrahedron Having Each Side 15 Cm & Cut In Two Parts Parallel To Baseparallel Piped Dissectable In Two Triangular Prisms , Complete Refrigeration And A.C Tool Kit. - • Pipe Cutters• Pipe Flaring Tools• Set Off Spanner Screw Drivers• Nuts, Unions, Reducers Of Various Sizes.• Service Valve Gauges, Compound Gauges.• Leak Detectors.• Blow Lamps.Tool Accessories And Other Items Such As Tube Cutter, Spring Bender Lever, Mech. Bender, Flaring Tool, Flaring Block, Flaring Yoke, Swaging Tools, Set Off Tools Of Different Types Of Wrenches, Pliers, Screw Drivers ( Including Star Screw Driver ) , Gold Switch Hacksaw And Blades, Vice, Reamers, Smooth Files, Tongs, Test Shut Off Valves, Service Gauges, Compound Gauge, Charging Hoses, Blow Lamp, Soldering And Brazing Units, Nitrogen Cylinder, R-12 And R-12 Cylinder Of 2 Kg And 5 Kg. Insulating Materials, Pipe Wrench, L End Key, Set Blow Lamp. , Samples Of All Valves Used In Ref. And Airconditioning: - Safety Controls: High Pressure And Low Pressure Cut Outs, Oil Pressure Controls, Solenoid Valves, Automatic Expansion Valves, Thermostatic Expansion Valves, Thermostat For Low Temperatures, Thermostat For Medium Temperatures And Thermostat Of High Temperatures. , Vapour Compression Refrigeration Cycle Test Rig - Compressor: Hermetically Sealed Compressor.Condenser: Air Cooled Condenser Made Out Of Copper Pipe & Aluminum Fins Of Matching Capacity With Fan Coolingevaporator: Copper Coil Immersed In Water. The Evaporator Is Insulated From Outside To Prevent Heat Lossexpansion Device: Capillary Tube & Thermostatic Expansion Valve.Energy Meter: One Each For Power Measurement Of Compressor & Evaporator Heater.Specifications:Compressor ½ Ton Air Cooled Condenser: Suitable For Above Compressor With Cooling Fanexpansion Device : Capillary Tube.Evaporator Coil: Suitable For Above Compressor Immersed In Water Tank.Electric Heater: For Balancing Refrigerating Effect Produced.Rota Meter: For Measuring Liquid Flow Of Refrigerant Refrigerant: Freon – 12Energy Meter: For Power Measurement Of Compressor & Heaterpressure Gauges:2 Nos. For High And Low Pressure.Thermometer :Glass Type, Dial Type Service Valve:3 Nos. Needle Type Ammeter:1 No.Voltmeter:1 No.Thermostat:1 No.Filter / Drier:1 No.The Equipment Must Be Mounted On A Sturdy Frame With Control Panel. , Air Conditioning Test Rig. - Compressor : Hermetically Sealed Compressor 1.5 Ton, Condenser : Air Cooled Condenser Made Out Of Copper Pipe & Aluminum, Suitable For Above Compressor With Cooling Fan. Evaporator : Air Calorimeter Type Evaporator. The Air Passed By A Fan Through Duct. The Expanded Refrigerant Passes Through Evaporator Coils, Fixed In The Duct. The Passing Air Comes In Contact With The Coils & Gets Cooled. Expansion Device : Thermostatic Expansion Valve. Energy Meter : For Power Measurement Of Compressor.Specifications:Compressor: 1.5 Ton Rotameter : For Measuring Liquid Flow Of Refrigerant.Refrigerant : Freon – 22.Pressure Gauge :2 Nos. For High And Low Pressure.Thermometer : Glass Type Dry And Wet Bulbsight Glass :1 No.Service Valves :7 Nos. Needle Type.Ammeter :1 Nos.Voltmeter :1 No.Thermostat :1 No.Filter / Drier :1 No.Energy Meter For Power Measurement Of Compressor.Digital Temperature Indicator. Temperature Sensor ( Thermocouple ) : 6 Nos.Hp / Lp Cutout To Suit Compressor Unit. , Model Of Lancashire Boiler - Steel Is About 75Cm. Long And 200Cm. In Diameter. Two Large Tubes Known As Fire Tubes Pass From End To End. At The Front End Tube A Furnace Fire Grating Is Placed And A Door Is Hinged. Brick Work, Seating And Flues Are Shown In Wood Work. The Boiler Is Complete With Each Weight Safety Valve, Manhole, Module, Check Valve High Steam And Low Water Safety Valve, Steam And Water Gauges, Regulating Draught Doors, Dampers With Counter Weight And Chimney. The Model Is Approximately One Meter In Length, 37 Cm. In Breadth And 45Cm High. It Is Specially Made Dissectible For Demonstration Purposes. , Model Of Babcock And Wilcox Boiler - It Is A Water Tube Boiler. The Shell Is 15Cm.Diameter And 75Cm. In Length And Is Fitted With A Super Heater And With Inclined Water Tubes Over The Furnace Connected With Headers. The Super Heater And With Stop Valve, Safety Valve, Water Gauge, Steam Gauge Manhole, Mudhole, Regulating Draught Door, Damper With Counter Weight And Chimney, Seating And Brick Work Are Shown In Wood Work. The Model Is Approximately One Meter Length 28 Cm. In Breadth And 77Cm High. , Model Of Locomotive Boiler - The Model Is Especially Designed To Understand The Working Of A Locomotive Steam Boiler. The Steel Shell Is Of About 20Cm Dia And 60Cm. In Length. The Fire Box Is Provided With A Door And Grate. The Dissected Barrel Shows Its Inside View. Hot Gases After Passing Through The Fire Tubes Enter The Smoke Box With A Door, Buzzle And The Blast Pipe. The Model Is Approximately 100Cm. In Length, 45Cm. In Breadth And Is Complete With Whistle, Steam Dome, Safety Valve, Check Valve, Steam Regulator Water And Steam Gauges. , Model Of Cochran Boiler - The Model Is The Best Known Fire Tube Boiler. The Shell Is About 25Cm In Diameter And 60Cm High. The Cylindrical Fire Box Is With A Door And Grate At Its Bottom. Hot Gases Pass From The Fuel To The Combustion Chamber Through A Short Flue Pipe And Then To Chimney Through The Tubes. At Both Ends Of The Tubes Are Given And Tubes Can Be Cleaned After Their Removal. The Model Is Complete With Check Valve, Steam And Water Gauges, Stop Valve, Safety Valve And Manhole. , Vertical Water Tube Boiler - It Is Fitted Inside A Cylindrical Fire Box To Increase The Heating Surface .It Is About 20Cm In Diameter And About 25Cm High. The Unit Is Complete With Lever Action Safety Valve, Thermometer Jacket, Pressure Gauge And Steam Gauge. , Mounting & Accessories Of Steam Boilers - Lever Safety Valvespring Loaded Safety Valvedead Weight Safety Valve Combined High Steam And Low Water Safety Valvewater Gauge Model Stop Valve Hopkinson Typefeed Check Valvesteam Injector Pressure Gauge Blow Off Cock Reducing Valvefusible Plugs Anti-Priming Pipe Expansion Steam Trap Float Steam Trapgreen Economiser , Fully Automatic Digital Touch Screen Rockwell Cum Brinell Hardness Tester Machine With Standard Acessories: - As Per The Item , Digital Impact Testing Machine ( Izod & Charpy Test ) - • Touch Screen Hmi• Usb Output Data Logging• Thermal Printer Output• Manual Operation Via Touch Screen• Calibration Featuresspecifications:Max. Capacity : 300 J / 168 J Over All Size Approx: 1.1M X 0.45M X 1.65M ( H ) Net Weight Approx.: 375Kg. Max. Scale Graduation: 2J Standard Accessories:Izod Striker: 1Charpy Striker: 1Anvil:1Spanner Set: 1Instruction Manual: 1 Other Accessories 1. Caliper Gauge Checking V Notch For Izod & Charpy 2. Templates 3. Depth Notch Gauge Including V & U Notch Gauges Checking Depth Below V / U Notch Angle & Radius 4. Self Centering Tong For Quick And Accurate Setting Of Charpy Test Specimen 5. V Notch Milling Cutter 6. U Notch Milling Cutter , Torsion Testing Machine - To Conduct Torsion And Twist Tests On Various Wires, Tubes, Sheet Materials & Torque Measurement By Pendulum Dynamometer System With A Autographic Recorder. The Accuracy Of Torque Indication Is ±10% Of True Torque. Max Torque Capacity ( Nm ) : 200 ; Torque Range ( Nm ) : 200, 100, 50 No. Of Division On Dial: 500; Torsion Speed: 1.5 Rpm Clearance Between Grips: 0.420 Mmgrips For Specimens ( Mm ) : 8-10Grips For Flat Specimens Width Mm: 3-10, 10-15, 15-20Motor Hp 0.5, 400-440Volts, 3Phase, 50Hz, , Spring Testing Machine - Machine Consists Of:>Loading Unit: It Consists Of C Type Rigid Frame With Hydraulic Cylinder At Its Top And An Adjustable Main Testing Table Is Connected To An Upper Cross Head Through Two Screwed Columns.> Control Panel: The Control Panel Consists Of A Power Pack With Drive Motor, Oil Tank, Control Valves And Electronic Display Unit.>Power Pack: The Power Pack Generates The Maximum Pressure Of 200 Kgf / Cm2.The Hydraulic Pump Provides Continuously Non-Pulsating Oil Flow.>Electronic Control Panel: Microprocessor Based Panelwith Following Featurea. Front Panel Membrane Key Board With Numeric Keys For Data Entry.B. 7 Segment Displayc. Data Entry Of Test Parameters.D. 20 Input Data Set Storage, 50 Result Storage.E. Printer Port For Dot Metrics Printer Interface.Specifications:Max. Capacity ( Kn ) : 100Measuring Range: 0-100Load Range With Accuracy Of Measurement +_ 1 % ( Kn ) : 2-100Load Resolution ( 20, 000 Counts Full Scale ) ( N ) : 5Table Size ( Mm ) : 250 X2400vertical Travel Of Table: 0-400Distance Between Trolleys Adjustable ( Mm ) : 500-2150Pair Of Compression Plates Diameter ( Mm ) : 250Max. Distance Between Compression Plates ( Mm ) : 400Ram Stroke ( Mm ) : 300Straining / Speeds ( Mm / Min ) ( At No Load ) : 0-250Hp: 2V: 440 Total Quantity : 1

Refer document

INR 48600.0 /-

Refer document

Sl. No.	Item Title	Item Description
1	ABRASIVE CUT OFF MACHINE:	3 HP Motor, 1440 rpm, Manual model, 10” Diameter wheel capable of cutting different metals of various diameters Fully enclosed
2	QUENCHING TANK	of mild steel used for different quenching medias for various heat treated processes.
3	POLISHING MACHINES:	Disc Size : 8” Variable Speeds 50-800 rpm High torque PMDC motor with D.C Drive Corrosion resistant fiber reinforced cover Water In and Drain
4	METALLURGICAL TRINOCULARMICROSCOPE:	1. Eyepiece tube: inverted tri-ocular eyepiece tube Leaning degree of tube about 30° Pupil adjusting range 53-75mm Bending light degree of eyepiece adjustable 2. Plan field eyepiece: 10x plan achromatic objectives:10?25?40?100X Total magnification:1000X 3.machincal tube length:about 160mm 4.Same axis rough and slight moving adjustable focusing system with limitation and elasticity adjusting unit. Up and down: 30mm Micro moving value: 0.002mm 5.Same axis double layer machine moving carrying stage: Specification: about 200x152mm Moving range: 15x15mm 6.Diameter of the hole on the moving stage: ?10mm, ?20mm 7.Filter: yellow, blue, green 8.Illuination unit: KELE Illumination: 60V/20W halogen lamp, adjustable brightness. Power: 220V/50Hz II)Outfit: 1. Main body (including tri-ocular): 1set 2. 10x eyepiece: 2pc 3. Plan achromatic objective : 10x, 25x, 40x, 100x 1each 4. Filter: yellow, blue, green 1each 5. 6V/20W halogen lamp 1pc 6. Light case: 1set
5	Pyrometer	Complete set with sensors to measure the temperature of 2000 degree Celsius
6	Infra red thermometer	Temperature range: –20°C to 400°C Operating temperature range: 0°C to 50°C at < 70% relative humidity Display Resolution: 1°C.Accuracy: ±2% of reading or ±3°C, whichever is greater @ 18 to 28°C ambient operating temperature.Response time: 1 second.Display Resolution on the meter: 1°C Spectral Response: 6 to 14 µm nominal Emissivity: preset 0.95 Detection element: Thermopile Field of view: 65 mm diameter circle at 1000 mm range Average battery life: 100
7	Thermocouple	Range 0-200 degree C. Accuracy +/- 1% of the range complete with sensors
8	Heat Treatment Furnace	Size of Working Chamber 4” X 4” X 9” Temperature Range 0-1200°C Power 230 Volts, 50 Hz, single phase Material of Construction: MS Paint Power coated
9	Compression Mounting Press	Mount size 1 to 2 inch Force Pneumatic Mold cylinders single Incoming pressure range: Max 95 Psi Heater specification 800 watts Thermostat range Max 300 degree C Cooling system water Electrical Specifications: 110 or 220 V (50/60 hZ) Dimensions: 340x 420x 495 mm Approx weight: 35 kg Recirculating tank (16 gallon) with pum (optional)
10	Belt Grinding Machine	This Equipment is used for rough Grinding of the Specimen. Single belt: 102 X 914 mm Electrical Specification : 110/220 V 50/60 Hz Construction: Aluminium Casting/Fabricated metal Dimension (WXDXH) : 510X630X375 mm Approx. Weight %3 Kg
11	Universal Table	• For experimentally verifying the laws of triangle, parallelogram and polygon of forces. • Equal circular 40cm dia aluminum disc, graduated into 360 divisions (degree) complete with leveling screws clamping device to fix the table at any desired angle,5 sliding clamp pulleys central ring string and five sets of iron nickelled slotted weights and one hanger of 15gm each. • Complete with all optional accessories
12	Parallelogram Law of Forces Apparatus	• A wooden board 50x60cm with wall brackets, two frictionless clamp pulleys, and three set of slotted weights of nickelled each set containing nine weight and one hanger of 50gms • Complete with all optional accessories
13	Polygon Law of Forces Apparatus	• Consisting of wooden board of 70x70cm size, provided with two wall brackets and 4 adjustable frictionless aluminum pulleys and 5 set of slotted iron nickelled each set containing 9 weight and one hanger of 50gms. • Complete with all optional accessories
14	Simply Supported Beam Apparatus	• Span of 1.0m consisting of 2 compression thrust type 10 kg tubular spring balances fixed on wooden polished board, a wooden bar with steel back plate. Completed with stirrups, hooks and two one kg weights. • Complete with all optional accessories
15	Friction Slide Apparatus	• Consisting of a 15x60cm wooden board with a glass top hinged on a iron base to which a sector with graduated arc and vertical scale is provided. The plane may be clamped at any angle up to 60.a 5cm frictionless pulley is attached to the end by means of a clamp adjustable to any necessary position. One set of three wooden carriages with different bottom surface(wooden,glass,iron) • Complete with all optional accessories
16	Worm and Worm Wheel Apparatus	• Consisting of a machine cut worm gear of 25cm dia carrying a metal drum of 12cm dia and machine cut worm on steel spindle carried 12cm dia pulley. The whole arrangement is fixed on heavy cast iron bracket capable to be fixed to a wall. Complete with effort pulley, string and hooks • Complete with all optional accessories
17	Screw Jack	• All metallic construction accurately machine cut screw with V pitch of 5mm carrying double flanged turned table of about 20 cm dia.fitted on a heavy cast iron base and complete with 2 adjustable pulleys, cord and hooks. • Complete with all optional accessories
18	Winch Crab Single Purchase	• Fitted with heavy cast iron ball brackets. The grooved wheel is of 25cm dia and gears are machine cut. • Complete with all optional accessories
19	Winch Crab Double Purchase	• Fitted with heavy cast iron ball brackets. The grooved wheel is of 25cm dia and gears are machine cut. Double set of gearing arrangements. • Complete with all optional accessories
20	Moment of Inertia of a Fly Wheel Apparatus	• 20cm dia comprising of carefully machine and balanced cast iron wheel and steel spindle in support on ball bearing in strong iron bracket .the wheel is smoothly painted black and is marked with a line.A pointer is fixed to one of the brackets. Diametric hole is drilled in the shaft to takea pin and cord the base is provided with holes so that the apparatus can be fixed to wall • Complete with all optional accessories
21	Simple Jib Crane	• Consisting of a tubular compression balance pivoted about an axis and fitted to the base. The tie chain has an adjustable angle bracket and fitted with a 10kg extension balance. Complete wooden base with 1.2m jib. • Complete with all optional accessories
22	First System of Pulley Apparatus	• Complete wall fixing set with 5 nos of single pulley. • Complete with all optional accessories
23	Second System of Pulley Apparatus	• Complete wall fixing set with 2 nos of triple pulley block. • Complete with all optional accessories
24	Slotted Weight	• 50 gm, 100 gm, 200 gm, 500 gm 1 gm, 2 gm
25	Searls Apparatus	• Consisting of two metallic frames suspended from a rigid support with the help of experimental wire and compensating wire. • Slotted Weights with hanger • Spirit Level • Spherometer • Cross Bar • Complete with all optional accessories
26	Hydraulic Bench with Apparatus / Accessories	Strictly as per the uploaded Bid Document
27	Vernier Caliper(A)	Hardened Stainless steel construction with satin chrome finish, Four way measurement capability for outside dimension, inside dimension, depth and step measurements. 50 mm Jaw depth L.C:0.02mm, Range 0-150 mm
28	Vernier Caliper(B)	Hardened Stainless steel construction with satin chrome finish, Four way measurement capability for outside dimension, inside dimension, depth and step measurements. 50 mm Jaw depth L.C:0.02mm, Range 0-200 mm
29	Digital Vernier Caliper,	Advanced onsite sensor, Absolute Scale Digital Caliper,0-6 inch range,water proof LCD readout and function control buttons on the calliper face, including origin to set and retain the original measuring point, and Zero/abs(absolute scale) to zero-set the LCD display
30	Vernier Caliper (C)	Hardened Stainless stee construction with satin chrome finish, Four way measurement capability for outside dimension, inside dimension, depth and step measurements. 50 mm Jaw depth L.C:0.02mm, Range 0-300 mm
31	Gear Tooth Vernier Caliper	For measuring Gear tooth thickness of the primary diameter with fine adjustment, With certificate of Calibration, L.C: 0.02 mm Range 1-26 Module, 2 Scales, wooden box
32	Outside Micrometer(A)	L.C: 0.01mm (0- 25 mm), Vernier scale in metric units, Baked-Enamel Finish, Stain chrome finish on thimble and sleeve, Carbide facing on spindle and anvil
33	Outside Micrometer(B)	L.C: 0.01mm (0- 50 mm), Vernier scale in metric units, Baked-Enamel Finish, Stain chrome finish on thimble and sleeve, Carbide facing on spindle and anvil
34	Disc/Flange Micrometer	Disc shaped faces with flanges for measuring the pitch of gear teeth Range: 0-25mm Resolution: 0.001 mm, Accuracy:+_ 4micro meter, With ratchet stop for constant force, Supplied in a fitted plastic case
35	Plunger Dial Gauge Indicator	Compact dial indicators with bezel diameters of 40 mm , Range 5mm Graduation:0.01 mm Dial Reading: A plus or minus 0-100, Measuring force 1.4 N or less
36	Lever Dial Gauge	Range 0.8 mm, Reading 0.01 mm, Graduation: 0-40-0
37	Magnetic V- Block	4", Size 100X95X70 mm
38	Flexible Dial Stand	Magnetic Base with on/off switch with fine adjustment Dovetail Groove for Test Indicator, Material Steel Size: 27 X 10 X 8 cm
39	Feeler Gauge Set (pack of 32)	Made of hardened alloy steel 0.03 to 1 mm, Quantity of leaves 32
40	Screw Pitch Gauge	Stainless steel material, Range:0.25mm to 6 mm No of leaves 32
41	Radius Gauge	Size:1mm to 7 mm Nickel plated case and locking screw for the checking of sectors of circle.
42	TOOL MAKER MICROSCOPE	Observation Tube :Monocular inclined at 45° with reticle of cross line Micro Work Stage: Highly accurate linear cross rollers guided micro work stage Size 150 x 150 mm with least count 0.001 mm. Travel of Stage: 50 x 50 mm on X and Y Axis by micrometer 0 to 25 mm L.C. 0.001 mm Illumination: 6 V - 20 W halogen light with highly precise condensing System built in Green Filter. Work Distance 67 mm. Maximum Work Height :90 mm. Maximum Weight Capicity:10 Kg. Field of View : 6.5 mm STANDARD ACCESSORIES :Ply Wood Box, Projection Lamp 2 Nos., Calibration Certificate, Operating Manual. Optional Accessory :V-Block/ Center Holding device/ Digital Read out with different options / Rotary Table / Projection Lamps
43	Sine Bar	Made of Iron, Size: 889 X 140 X 203 cm , Center distance between rollers is within +_ 0.005 mm.
44	Bevel protractor	Angle range 0-360 deg, provided with one fixed blade and other movable blade.
45	Universal Bevel Protractor	High precision Instrument for accurate angle measurement on machines, Moulds and Jigs, Can be attached to Height Gages, Balde Length 150, 300 mm, Graduation : 5 feet
46	ENGINEERING DRAWING MODELS	• Rectangular Prism • Rectangular Pyramid • Triangular Prism • Triangular Pyramid • Square Prism • Square Pyramid • Pentagonal Prism • Pentagonal Pyramid • Hexagonal Prism • Hexagonal Pyramid • Octagonal Prism • Octagonal Pyramid • Decagonal Prism • Decagonal Pyramid • Cube 20 x 20 cm • Skeleton Cube 20 x 20 cm • Cone • Sphere 15 cm • Half Sphere • Cylinder • Semi-Cylinder • Quarter-Cylinder • Tetrahedron • Octahedron • Circle • Double Cross •Single Cross • Model Plates (Set of 7) Dissected Solids • Cube Cut in Two Right Angles • Sphere 10 cm Dia Cut in Two Hemispheres • Cylinder Cut in Two Semi-Cylinders • Cone Cut at an Oblique Angle • Pyramid Triangular Cut in Two Parts • Triangular Prism Cut in Two Parts Parallel to Base • Tetrahedron Having Each Side 15 cm & Cut in Two Parts Parallel to Base Parallel piped Dissectable in Two Triangular Prisms
47	COMPLETE REFRIGERATION AND A.C TOOL KIT.	• Pipe cutters • Pipe flaring tools • Set off spanner screw drivers • Nuts, unions, reducers of various sizes. • Service valve gauges, compound gauges. • Leak detectors. • Blow lamps. Tool accessories and other items such as Tube cutter, Spring bender lever, Mech. Bender, flaring tool, flaring block, flaring yoke, swaging tools, set off tools of different types of wrenches, pliers, screw drivers (including star screw driver), gold switch hacksaw and blades, vice, reamers, smooth files, tongs, test shut off valves, service gauges, compound gauge, charging hoses, blow lamp, soldering and brazing units, nitrogen cylinder,R-12 and R-12 cylinder of 2 kg and 5 kg. Insulating materials, pipe wrench, L end key, set blow lamp.
48	SAMPLES OF ALL VALVES USED IN REF. AND AIRCONDITIONING:	Safety controls: High pressure and low pressure cut outs, oil pressure controls, solenoid valves, automatic expansion valves, thermostatic expansion valves, thermostat for low temperatures, thermostat for medium temperatures and thermostat of high temperatures.
49	VAPOUR COMPRESSION REFRIGERATION CYCLE TEST RIG	Compressor: Hermetically sealed compressor. Condenser: Air Cooled condenser made out of copper pipe & Aluminum fins of matching capacity with fan cooling Evaporator: Copper Coil immersed in water. The evaporator is insulated from outside to prevent heat loss Expansion device: Capillary Tube & Thermostatic expansion valve. Energy Meter: One each for power measurement of compressor & evaporator heater. Specifications: Compressor ½ Ton Air cooled condenser: Suitable for above compressor with cooling fan Expansion device : Capillary tube. Evaporator coil: Suitable for above compressor immersed in Water tank. Electric Heater: for balancing refrigerating effect produced. Rota meter: For measuring liquid flow of refrigerant Refrigerant: Freon – 12 Energy meter: For power measurement of compressor & heater Pressure Gauges:2 Nos. for high and low pressure. Thermometer :Glass type, dial type Service valve:3 Nos. needle type Ammeter:1 No. Voltmeter:1 No. Thermostat:1 No. Filter / Drier:1 No. The equipment must be mounted on a sturdy frame with control panel.
50	AIR CONDITIONING TEST RIG.	Compressor : Hermetically sealed compressor 1.5 Ton, Condenser : Air Cooled condenser made out of copper pipe & Aluminum, Suitable for above compressor with Cooling fan. Evaporator : Air calorimeter type evaporator. The air passed by a fan through duct. The expanded refrigerant passes through evaporator coils, fixed in the duct. The passing air comes in contact with the coils & gets cooled. Expansion device : Thermostatic expansion valve. Energy Meter : For power measurement of compressor. Specifications: Compressor: 1.5 Ton Rotameter : for measuring liquid flow of refrigerant. Refrigerant : Freon – 22. Pressure gauge :2 nos. for high and low pressure. Thermometer : Glass type dry and wet bulb Sight glass :1 No. Service valves :7 Nos. needle type. Ammeter :1 Nos. Voltmeter :1 No. Thermostat :1 No. Filter/ Drier :1 No. Energy meter for power measurement of compressor. Digital Temperature Indicator. Temperature sensor (thermocouple): 6 Nos. HP/LP cutout to suit compressor unit.
51	MODEL OF LANCASHIRE BOILER	Steel is about 75cm. long and 200cm. in diameter. Two large tubes known as fire tubes pass from end to end. At the front end tube a furnace fire grating is placed and a door is hinged. Brick work, seating and flues are shown in wood work. The boiler is complete with each weight safety valve, manhole, module, check valve high steam and low water safety valve, steam and water gauges, regulating draught doors, dampers with counter weight and chimney. The model is approximately one meter in length, 37 cm. in breadth and 45cm high. It is specially made dissectible for demonstration purposes.
52	MODEL OF BABCOCK AND WILCOX BOILER	It is a water tube boiler. The shell is 15cm.diameter and 75cm. in length and is fitted with a super heater and with inclined water tubes over the furnace connected with headers. The super heater and with stop valve, safety valve, water gauge, steam gauge manhole, mudhole,regulating draught door, damper with counter weight and chimney, seating and brick work are shown in wood work. The model is approximately one meter length 28 cm. in breadth and 77cm high.
53	MODEL OF LOCOMOTIVE BOILER	The model is especially designed to understand the working of a locomotive steam boiler. The steel shell is of about 20cm dia and 60cm. in length. The fire box is provided with a door and grate. The dissected barrel shows its inside view. Hot gases after passing through the fire tubes enter the smoke box with a door, buzzle and the blast pipe. The model is approximately 100cm. in length, 45cm. in breadth and is complete with whistle, steam dome, safety valve, check valve, steam regulator water and steam gauges.
54	MODEL OF COCHRAN BOILER	The model is the best known fire tube boiler. The shell is about 25cm in diameter and 60cm high. The cylindrical fire box is with a door and grate at its bottom. Hot gases pass from the fuel to the combustion chamber through a short flue pipe and then to chimney through the tubes. At both ends of the tubes are given and tubes can be cleaned after their removal. The model is complete with check valve, steam and water gauges, stop valve, safety valve and manhole.
55	VERTICAL WATER TUBE BOILER	It is fitted inside a cylindrical fire box to increase the heating surface .It is about 20cm in diameter and about 25cm high. The unit is complete with lever action safety valve, thermometer jacket, pressure gauge and steam gauge.
56	MOUNTING & ACCESSORIES OF STEAM BOILERS	Lever safety valve Spring Loaded Safety valve Dead Weight Safety valve Combined high Steam And Low Water Safety Valve Water Gauge Model Stop Valve Hopkinson type Feed Check Valve Steam Injector Pressure Gauge Blow Off Cock Reducing valve Fusible Plugs Anti-priming pipe Expansion Steam Trap Float Steam trap Green Economiser
57	Fully Automatic Digital Touch Screen Rockwell Cum Brinell Hardness Tester Machine with Standard Acessories:	As per the item
58	Digital Impact Testing Machine (Izod & Charpy Test)	• Touch screen HMI • USB output data logging • Thermal printer output • Manual operation via touch screen • Calibration features Specifications: Max. Capacity : 300 J/ 168 J Over all size approx: 1.1m X 0.45m X 1.65m (H) Net weight Approx.: 375kg. Max. scale graduation: 2J Standard Accessories: Izod Striker: 1 Charpy Striker: 1 Anvil:1 Spanner set: 1 Instruction Manual: 1 other accessories 1. Caliper gauge checking v notch for Izod & Charpy 2. Templates 3. Depth notch gauge including V & U notch gauges checking depth below V/U notch angle & radius 4. Self centering tong for quick and accurate setting of charpy test specimen 5. V notch milling cutter 6. U notch milling cutter
59	Torsion testing machine	To conduct Torsion and Twist tests on various wires, tubes, sheet materials & torque measurement by pendulum dynamometer system with a Autographic recorder. The accuracy of torque indication is ±10% of true torque. Max torque capacity(Nm): 200 ; Torque range(Nm): 200, 100, 50 No. of division on dial: 500; Torsion Speed: 1.5 rpm Clearance between Grips: 0.420 mm Grips for specimens (mm): 8-10 Grips for flat specimens width mm: 3-10, 10-15, 15-20 Motor Hp 0.5, 400-440Volts, 3phase, 50Hz,
60	Spring Testing Machine	Machine consists of: >Loading unit: it consists of C type rigid frame with hydraulic cylinder at its top and an adjustable main testing table is connected to an upper cross head through two screwed columns. > Control Panel: The control panel consists of a power pack with drive motor, oil tank, control valves and electronic display unit. >Power pack: The power pack generates the maximum pressure of 200 Kgf/cm2.The Hydraulic pump provides continuously non-pulsating oil flow. >Electronic control panel: Microprocessor based panelwith following feature a. Front panel membrane key board with numeric keys for data entry. b. 7 Segment display c. Data entry of test parameters. d. 20 Input data set storage, 50 result storage. e. Printer port for dot metrics printer interface. Specifications: Max. Capacity(KN): 100 Measuring Range: 0-100 Load Range with accuracy of measurement +_ 1 % (KN): 2-100 Load Resolution (20,000 counts full scale) (N) : 5 Table size (mm): 250 X2400 Vertical travel of table: 0-400 Distance between trolleys adjustable (mm) : 500-2150 Pair of compression plates diameter(mm): 250 Max. Distance between compression plates (mm): 400 Ram Stroke (mm) : 300 Straining/speeds (mm/min) (at no load) : 0-250 HP: 2 V: 440