|
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge-In cement mortar. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead-For thickness of tiles 10 mm to 25 mm |
| 4 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 5 | Earth work in bulk excavation by manual means over areas (exceeding 30 cmin depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level :1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size. |
| 7 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 8 | Extra for half Brick masonry in superstructure above plinth level upto floor V level |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard)includingISImarkednickelplatedbrightfinished M.S. Piano hinges IS: 3818 marked with necessary screws. |
| 11 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete-150x10 mm |
| 12 | Providing and fixing bright finished brass helical door spring (superior quality) with necessary brass screws etc. complete |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement - 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Centering and shuttering including strutting andpropping etc and removal of form work for.-Suspended floors, roofs, landings, balconies and access platform. |
| 16 | Centering and shuttering including strutting andpropping etc and removal of form work for.-Edges of slabs and breaks in floors and walls. Under 20cms wide. |
| 17 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 18 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 19 | Brick edging 7cm wide 11.4cm deep to plinth protection with common burnt clay (non-modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 Cement : 4 fine sand) and curing complete. |
| 20 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 21 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) |
| 22 | 15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand) |
| 23 | 12mm Cement plasterfinished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand) |
| 24 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 26 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 28 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete- In colour such as White, Ivory, Grey, Fume Red Brown . |
| 29 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing aluminum work for doors, windows, ventilators and partitionswithextrudedbuiltupstandardtubularsections/appropriateZsections and other sections of approved make conforming to IS: 733 and IS:1285,fixedwithdashfastenerofrequireddia.andsizeincluding necessary filling up of gaps at junctions i.e, at top, bottom and sides with requiredEPDMrubber/neoprenegasketfeltetc.Aluminumsections shallbesmooth,rustfree,straight,mitredandjointedmechanicallywhereverrequiredincludingcleatangle,Aluminumsnapbeadingforglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)22.1.1For fixed portion-Anodizedaluminum(Anodizedtransparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 31 | Providing and fixing 12mm thick prelaminated particle boardflat pressedthreelayerorgradedwoodparticleboard(conformingtoIS:12823Grade-Itype-II)inpanellingfixedinaluminumdoors,windowsshuttersandpartitionframeswithC.P.brass/stainlesssteelscrewsetc.complete asperarchitecturaldrawingsanddirectionsofengineer-in-charge-.Pre-laminated particle board with decorative lamination on both sides. |
| 32 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : |
| 33 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board-470x420 mm bowl depth 178 mm . |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wallswherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 35 | Providing and fixing 9\" grab bar near wash basin |
| 36 | Providing and fixing 9\" grab bar near wash basin Near European Seat |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.:Internal work-Exposed on wall- 15 mm dia. nominal bore. |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. 32 mm dia |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. 40 mm dia |
| 40 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 41 | Providing and fixing uplasticized PVC connection pipe with brass unions-45 cm length -15 mm nominal bore |
| 42 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 43 | GST@18% |
