Construction Of Civil Hospital Paonta Sahib Tehsil Paonta Sahib District Sirmour (Hp) (Sh- C/O Canteen Building With Civil Work And Sanitary Fittings Complete) Under Deposit. Construction Of Civil Hospital Paonta Sahib Tehsil Paonta Sahib District Sirmour
Tender Value
7.80 Lakhs
Estimated cost
Bid Submission
27 Sep 2021
0 days left
EMD
15700
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paonta Sahib → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Civil Hospital Paonta Sahib Tehsil Paonta Sahib District Sirmour (Hp) (Sh- C/O Canteen Building With Civil Work And Sanitary Fittings Complete) Under Deposit. Construction Of Civil Hospital Paonta Sahib Tehsil Paonta Sahib District Sirmour (Hp) (Sh- C/O Canteen Building With Civil Work And Sanitary Fittings Complete) Under Deposit.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work above Ground level upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 (twenty) metres lead In cement mortar Including all leads lifts and carriage of materials, as per the direction of Engineer-In-charge. |
| 2 | Demolition above G.L. up to floor two level including disposal of unserveceablematerial with in 20 mtr lead and including cutting necessary reinforcement and RCC/RB work including carriage of all labour equipment and materials to various locations through all lead, lift and other includiongcharges complete as per entire satisfaction of theEngineer-In-charge |
| 3 | Excavation in foundation trenches etc. in earth work in all heights, depths and in all kinds of soils includingsaturated soils comprisng of plick work jumper work, blasting work both in soft and hardrock, chisselling/wedging out of rock (where blasting is prohibted)and their intermediate classification with in all leads and lifts, stacking the excavated soil not more than 3 (Three) meters clear from the edge of excavation and then returning the stacked soil in 15cm(Fifteen centimetre) layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads lifts.and carriage of material as per the direction of the Engineer-in-Charge. |
| 4 | Filling in plinth withsand under floors and plinth including watering, ramming, consolidating and dressing completeincluding all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge. |
| 5 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering,strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work |
| 6 | Foundation, footings basis of columns etc. and mass concrete including carriage of all labour equipment and matrials to various locations through all leadslifts and other incidental charges complete as per entire satisfaction of the Engineer. |
| 7 | Flat surface such as soffits of suspended floors, roofs, landings & the like floor etc. upto 200mm ( two milimeter ) in thickness as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 8 | Columns, pillars, posts & struts, square, rectangular or polygonal in plan as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 9 | Beams, cantilevers, girders & lintel sides of soffits of beams, beam haunchings, cantilvers, bressumers & lintels not exceeding 1.00 mtr. ( One meter ) in depth in all heights from floor level as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 10 | Providing & laying cement concrete 1:6:12 ( One cement : six approved sand : twelve graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work in foundation & plinth as per HPPWD. Specification 1990 volume-I ( One )including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per the entire satisfaction of the Engineer-in-Charge. |
| 11 | Providing and laying cement concrete 1:4:8 [one cement: four sand;eigth graded stone aggregate 40 mm( forty milimetre) nominal size] and curing complete excluding cost of form work in Foundation and plinth Including all leads lifts and carriage of materials, as per the direction of Engineer-in-Charge. |
| 12 | Providing and laying cement concrete work mechanically mixed and vibrated 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work in foundation and plinth as per specification Including all leads lifts and carriage of materials, as per the direction of Engineer-in-Charge. |
| 13 | Foundation, footing, basis of columns etc. and mass concrete including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume-I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 14 | Suspended floors,roofs,landings & shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor levels including carriage of materials with in all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 15 | Columns,pillars, posts and strutts upto all floor level including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 16 | Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined to gether at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring.Shutters having width below 3.5 metres. |
| 17 | Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement as per HPPWD specification 1990 volime l including of all labour equipment and materials to varoius locations throughall leads,lift and other:String courses, copings, bed plates, anchor blocks, plain windows. |
| 18 | Providing tor steel reinforcement for reinforced cement concrete work including bending, binding & placing in position complete including cost of binding wire upto all floor level as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 19 | Second class brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6(One cement: Six sand) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts as per entire satisfaction of Engineer in charge. |
| 20 | Stone soling properly hand packed tightly under floors as per HPPWD specifications 1990 ,voume-I (one)including carriage of all labour equipments and materialsto various locations through all leads,lifts & other incidental charges complete as per entire satisfactionof the Engineer-in-Charge. |
| 21 | Providing and fixing 19 mm (Ninteen milimeters) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete as per HPPWD specification 1990 voume-I (one) including carriage of all labour equipments and materialsto various locations through all leads,lifts & other incidental charges complete as per entire satisfactionof the Engineer-in-Charge. |
| 22 | Providing wood work in frames of doors, windows, clearestory window and other frames wrought framed and fixed in position complete. Sal wood.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 23 | Providingand fixing penelled, glazed or panelleled and glazed suhutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws. 40 mm thick 2nd class deodar wood.including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 24 | Providing and fixing 40mm thick 2nd class deodar woodwire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for doors windows and cleresorey windows including brighe finishedblack necessary screws including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 25 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x 15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size)including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 26 | Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete as per HPPWD specifications 1990 voume-I (one)including carriage of all labour equipements and materials to variouslocation through all leads,lifts & other incidental charges complete as per entire satisfactionof the Engineer-in-Charge. |
| 27 | 300 mm x16mm(Three hundred milimeters into sixteen milimeters size) |
| 28 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as per HPPWD specifications 1990 voume-I (one) including carriage of all labour equipements and materialsto various locations through all leads,lifts & other incidental charges complete as per entire satisfactionof the Engineer-in-Charge. |
| 29 | 150 mm x10 mm (One hundred fifty milimeters into ten milimeters size) |
| 30 | Providing and fixing aluminiumhandles anodized transparant or dyed to required shade and colour with screws etc., complete, including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.125mm.(one hundred twenty five milimetres) size |
| 31 | Providing & fixing mild steel plain grill of required pattern in window etc, M.S 20*5 mm square bars with screws etc, as per specification 1990 voline- including carriage of all labour equipment andmaterials to variouslocations throughall leads,lifts & other incidental charges complete as per entire satisfactionof the Engineer-in-Charge. |
| 32 | Providing & laying Duro stone vetrified tiles ( 300 x 300 x 10 mm ) ( Three hundred inti three hundred into ten milimetre ) of Nitco, Kajaria / Orient etc. or equilevent of approved shade in flooring, treads of steps & landing laid on a bed of 12 mm ( Twelve milimtre )thick cement mortar 1 : 3 ( One cement : three sand ) laid over & jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments and materials to various location through allleads,lifts & otherincidental charges complete as per entire satisfaction of theEngineer-in-Charge. |
| 33 | Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.including of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge. |
| 34 | Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick |
| 35 | 15mm ( Fifteen milimeter ) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises, internal rounded angles, chamfers & rounded angles not exceeding 80mm ( eighty milimeter ) in grith finished even and smooth in cement mortar 1:6 ( One cement : six sand ) as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 36 | 15mm ( Fifteen milimeter ) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises, internal rounded angles,chamfers & rounded angles not exceeding 80mm ( eighty milimeter ) in grith finished even and smooth in cement mortar 1:6 ( One cement : six sand ) as per HP.PWD., specification 1990 Volume-I including carriage of all labour equipments & materialds to various location through all leads, lifts & other incidential charges complete as per entire satisfaction of the Engineer. |
| 37 | 6mm ( six milimetre ) cement plaster to ceiling with cement mortar 1:3 ( One cement : three approved sand )as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 38 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting Readymixed paint brushing primer for enemel |
| 39 | Painting one coats(excluding priming coat ) on new concrete/ masonry/plaster surfaces with ready mixed paint brushing for use on floors to give an even shade including cleaningofthe surface of all dirt, dust and other foreign matter and sand papering as required with paint other than white including applying a putty including all leads ,lifts and carriage of materials, as per the direction of Engineer-in-Charge. |
| 40 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecoratedconcrete/stone/plastered wall surfaces to give an even shadeincluding thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. |
| 41 | Providing and fixing to wall ceiling and floor galvanised mild steelto be(medum grade)tube fitting and clams including making good the wall,ceiling and floor 15 mm nominal size).including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 42 | Providing & fixing Vitreous China wash down water closet ( European type W.C. pan ) with intergal \" P \" or \" S \" trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( One cement : one sand ) ( Seat & cover to be measured & paid for separately ) Anglo Indian European No. 2004 of white shade of Hindware or its equilevent W.C. Pan as per HP.PWD., specification Volume -I ( one )including carriage of all labour equipment & materialsto various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge. |
| 43 | Providing & fixing plastic seat ( solid/Hollow type ) & cover for wash down water closet with C.P. brass hinges & rubber buffers Solid Type white plastic seat & cover as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materialsto various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 44 | Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 10 litres capacity |
| 45 | Providing and fixingPTMTjet sprayof approved qualityand colour with one metre tube.including carriage of all labour equipment & materialsto various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 46 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting Flat back 550mmx400mm |
| 47 | Providing and fixing 32 mm (thirty two milimetres) dia C.P. Brass waste for wash basinincluding all leads,lifts and carriage of materials complete asper the direction andentire satisfaction of the Engineer-in-Charge. |
| 48 | Providing & fixing M.I. union for wash basin or sink 32mm ( Thirty two milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labourequipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge. |
| 49 | Providing & fixing brass bib tap ( superior or heavy type ) 15mm dia ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage ofall labour equipment &materials to various location through all leads,lifts & otherincidentalcharges complete as per entire satisfaction of the Engineer-in-charge. |
| 50 | Providing and fixing P.V.C.connection with brass unions 300/450 mm length including carriage of all labour equipments and materials to variouslocations through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 51 | Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g.tees,elbow,reducers,connection,couplers and clamps with jointing testing and fittings complete includings cuttings and making good the walls etc. |
| 52 | Equal tees 1620 |
| 53 | Elbows 1620*20 mm thread |
| 54 | Providing and fixing PVC water storge tank of lSl:12701 marked G.l connection 15 mm nominalbore ball squito proof PVC cover with locking arrangement including hoisting up to all heights level: 1000 ltr capasity ,tank including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. |
| 55 | Providing and fixing brass ball valve 15 mm nominal boreincluding carriage of all labourequipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge. |
| 56 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 100mm dia pipesincluding carriage of all labourequipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge. |
| 57 | Providing and fixingstainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S.brackets painted white including cutting holes and making good the same but excluding fitting. including carriage of all labourequipment &materials to various location through all leads,lifts & other incidentalcharges complete as per entire satisfaction of the Engineer-in-charge. |
| 58 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor,gully or nahani trap including carriage of all labour equipments and materials to various locations through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-charge. |
| 59 | Providing and fixingPVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. completeincluding all leads,lifts and carriage of materials complete asper the direction andentire satisfaction of the Engineer-in-Charge.110 mm x 90 mm (One hundred ten milimetres into ninety milimetres) size. |
| 60 | Providing and fixingchromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including all leads,lifts and carriage of materials complete asper the direction andentire satisfaction of the Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Sep 17, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender