Construction Of Garrage Cum Motor Cycle Stand At Ado Office, Bhatli
Tender Value
7.02 Lakhs
Estimated cost
Bid Submission
29 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhatli → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Garrage Cum Motor Cycle Stand At Ado Office, Bhatli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2021 | 1st Corrigendum | Date | 29-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation offoundation in hard soil or gravelly soil with all leads,lifts and delifts to proper section and profile including dressingand levelling the bed upto required depth etc complete as directed by EIC |
| 2 | Filling in foundationwith sand, watered and rammed inculding cost, conveyance and royality of materials with all Labour Charge. |
| 3 | Cement Concrete (1:4:8) with 40mm size cbhg metals in Foundation and Plinth |
| 4 | C.C.(1:3:6) with 12mm and down graded size C.B.H.G chips incl. cost & conveyance |
| 5 | (a) RCC work of M-20 grade with 20mm and down grade size cbhg chips including hoisting and laying in GF. |
| 6 | a)Base |
| 7 | b)Column nd beam |
| 8 | c) Roof Slab |
| 9 | d) Lintel |
| 10 | e) chajja |
| 11 | Straightening bent up or coiled M.S rod or HYSD steel ( Fe - 415 )including Cutting, Bending, hooking, welding the M.S rod and Binding,tying the grills, hoisting, lowering and placing in position as requried for RCC works including cost, conveyance and tax ofRod and binding wire 18 or 20 gauge and labour charge for the work etc complete in all. |
| 12 | Brick work with Fly-Ash Brick in C.M (1:6) in F & P of size 25 cm x 12 cm x 8 cm having cruching strength not less than 75 kg/sqcm inculding cost,conveyance and royalty of materials with labour charge etc complete in all respect in F & P. |
| 13 | 2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips |
| 14 | Brick work with Fly-Ash Brick in C.M (1:6) of size 25 cm x 12 cm x 8 cm having cruching strength not less than 75 kg/sqcm inculding cost,conveyance and royalty of materials with labour charge etc complete in all respect in Superstructure. |
| 15 | 16 mm thick cement plaster (1:6) including necessary scaffolding,curring etc..as per direction of engineer in charge. |
| 16 | 12 mm (1/2\") thick cement plastering in C.M (1:6)finishing smooth to out side smooth surfacefor brick work wall after racking out the joint inculding watering and curing withcost, conveyance & royality and taxes of allmaterials and cost of all labour charge requried for the work etc complete. |
| 17 | 6 mmthick cement plastering in C.M (1:4)over RCC surfaces finished smooth including closed deep chipping and slurry treatment with cost,conveyance and royalty of materials curring etc. as per direction of EIC. |
| 18 | Supply, fitting and fixing of tile in floors, treads etc. on 20 mm thick bed of cement mortar (1:4) joint with neat cement slurry etc complete |
| 19 | Fixing Tiles in dados skirting on 12 mm thick cement plaster (1:3) |
| 20 | Cement concrete (1:1.5:3) with 20 mm & down grade black hard crusher broken granite chips of approved quality in ramp |
| 21 | 25mm thick grading concrete in C.M (1:2:2) with 6 mm size H.G chips or Bagri on roof |
| 22 | Cement washing two coats with cost of all labour and materials complete as per direction of engineer in charge. |
| 23 | Finishing wall with plastic emulsion paint to exterior surface of wall with approved shade with two coats to give an even shade |
| 24 | Priming one coat with any approved wall primer over wall surface in ground floor |
| 25 | Distempering two coats to inside walls of approved shade in ground floor |
| 26 | Supply,Fitting and fixing of MS door with iron work wrought and put up in etc. complete as per direction of engineer in charge. |
| 27 | Supply, fitting and fixing of electrical works as per direction of the Engineer-in-charge |
AI Tender Summary
Tender Timeline
Sep 26, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender