Construction Of Godown At Fiac, Bijepur
Tender Value
10.96 Lakhs
Estimated cost
Bid Submission
29 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijepur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Godown At Fiac, Bijepur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2021 | 1st Corrigendum | Date | 29-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation offoundation in hard soil or gravelly soil with all leads,lifts and delifts to proper section and profile including dressingand levelling the bed upto required depth etc complete as directed by EIC |
| 2 | Filling in foundationwith sand, watered and rammed inculding cost, conveyance and royality of materials with all Labour Charge. |
| 3 | Cement Concrete (1:4:8) with 40mm size cbhg metals in Foundation and Plinth |
| 4 | RCC work of M-20 grade with 20mm and down grade size cbhg chips including hoisting and laying in ground floor |
| 5 | (i) Column Base |
| 6 | (ii)Frustum |
| 7 | (iii) Plinth Band |
| 8 | (v) Column upto roof level |
| 9 | (vi) Lintal |
| 10 | (vii) Beam |
| 11 | (viii) Roof Slab |
| 12 | (ix) Box Chajja |
| 13 | Straightening bent up or coiled M.S rod or HYSD steel ( Fe - 415 )including Cutting, Bending, hooking, welding the M.S rod and Binding,tying the grills, hoisting, lowering and placing in position as requried for RCC works including cost, conveyance and tax ofRod and binding wire 18 or 20 gauge and labour charge for the work etc complete in all. |
| 14 | Brick work with Fly-Ash Brick in C.M (1:6) in F & P of size 25 cm x 12 cm x 8 cm having cruching strength not less than 75 kg/sqcm inculding cost,conveyance and royalty of materials with labour charge etc complete in all respect in F & P. |
| 15 | Brick work with Fly-Ash Brick in C.M (1:6) in F & P of size 25 cm x 12 cm x 8 cm having cruching strength not less than 75 kg/sqcm inculding cost,conveyance and royalty of materials with labour charge etc complete in all respect in Superstructure |
| 16 | 2.5 cm. Damp proof course(DPC) with C.C. (1:2:4) using 12mm. Size hard broken granite Chips |
| 17 | 6 mm thick cement plaster (1:4) to RCC surface finished smooth including closed deep chiping and slury treatment. |
| 18 | 12mm (1/2\") thick cement plastering in C.M (1:6)finishing smooth to out side smooth surfacefor brick work wall with watering and curing etc. complete as per the direction for the EIC. |
| 19 | 16mmthick cement plastering in C.M (1:6)over RRHGMasonrywall with watering and curing etc. complete as per the direction for the EIC. |
| 20 | 25mm thick grading concrete in C.C (1:2:2)with 6mm size H.G chips or bajri on new work inculding cost, conveysnce & royalty of materials etc. |
| 21 | Cement concrete (1:2:4) with 12mm & dowan gradeH.G Chips,inculding all cost, conveyance and royality of materials with all labour charge. |
| 22 | Fixing of Kota tiles in floors,treads or steps and landings on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry in ground floor. |
| 23 | Fixing of Kota tiles in Dados,skirting and Risers on 12mm thick bed of cement mortar(1:3) joined with neat cement slurry in ground floor. |
| 24 | Cement washing two coats in ground floorinside and outside. |
| 25 | Distempering two coats to wall distemper of approved shade on inside. |
| 26 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paints in ground floor. |
| 27 | Supplying, fitting, fixing of rolling shutter including priming and painting of shutters and grills |
| 28 | Supplying, fitting, fixing of sky light fabricacated including painting of size 0.3 x 0.3 with the provision of water proof covering to the sky lights |
| 29 | Recessed wiring to light point in single core multistand copper wire with 20mm dia non-metallic PVC conduit |
| 30 | Short Point |
| 31 | Medium Point |
| 32 | Long Point |
| 33 | Recessed wiring to 3 pin 5Amp plug point in single core multistand copper wire P/6 |
| 34 | (a)onexisting board |
| 35 | Supply,fitting and fixing of Metal box of 150mmx75mmx60mm with suitable size of laminated sheet with all fittings like piano type switch,5 pin socket wiring etc. |
| 36 | Recessed wiring to sub main in single core multistand copper wire |
| 37 | (a) 2x6sqmm |
| 38 | ©2x2.5sqmm |
| 39 | Supply and fitting of BK angle holder with Shade but without lamp M/7 |
| 40 | Supply and fitting of standard earthing as per Govt. specification M/28 |
| 41 | Supply and fitting of 23W LED Bulb with all accessories. |
| 42 | Supply and fitting of 32Amp ICDP main switch on MS Box |
| 43 | supply and fitting of 6sqmm PVC twin core Aluminium wire with GI wire for service connection. |
| 44 | Supply and fitting of 4way MCB distribution Box |
| 45 | Supply and fitting of Exhaust fan with shield cover on the venttilators |
| 46 | Sign board on the wall |
AI Tender Summary
Tender Timeline
Sep 26, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender