|
| 1 | Supply of LED surface type batten four feet length consisting of high quality extruded aluminium heat sink for better heat dissipation with nominal wattage of 20W with non-removable LED tube, (Minimum efficacy of 95 Lumens/Watt housing made of Aluminium / withpolycarbonate Plastic diffuser,with life expectancy of min 50,000 hrs for LED\"s and suitable built inLED Driversuitable to operate on230 +/- 15%Volts AC , 50 Hzsingle phase supply,for LED\"s ofcool white colour with min. as per tenderspecifications & special conditions complete in all respect etc as required. |
| 2 | Supply of XLPE insulated PVC sheathed galvanised flat steel strip armouredaluminum conductor cable of grade 1.1 KV,offollowing size confirming toIS: 7098/Part-I(1988) with up-to date ammendments etc. complete as required.3.5 x 35 sq.mm |
| 3 | Supply of Ceiling fan 1200mm sweep with regulator having double ball bearingand adjustable height suitable for operation on 230 V,50 Hz, single phase AC supply along with standard accessories as required. |
| 4 | Supply of 300 mm sweepsingle phase 900 RPM heavy duty Exhaust fan suitable for operation on 230 V, 50 Hz, single phase AC supply including all accessoriesetc as required. |
| 5 | Supply and fixing ofautomatic hand dryers of heavy duty stainless steel body of 230 volt as required. |
| 6 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSPVCinsulatedcopperconductorsinglecorecableinsurface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 7 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 8 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts,TPNMCBdistributionboardofsheetsteel,dustprotected,duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(a) 4 way (4 + 12), Double door |
| 9 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 10 | Supplying and fixing following rating, single pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 06-32 Amp |
| 11 | Supplying and laying of following sizeDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. (OD-63 mm and ID-51 mm nominal) |
| 12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 13 | Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 14 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/LED Fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 15 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 16 | Installationofexhaustfanintheexistingopening,includingmakinggoodthe damage, connection, testing, commissioning etc. as required. |
| 17 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on DWC Pipe as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 18 | Supplying and making end termination with brass compression gland and aluminium lugsforfollowingsizeofPVCinsulatedandPVCsheathed/XLPEaluminium conductor cable of 1.1 KV grade as required.3.5 x 35 sq.mm |
| 19 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVCinsulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |