West Bengal Housing Infrastructure Development Corporation Limited-HIDCO has published Repairing Of Sanitary And Plumbing Works Including Re Newing Of Wooden Door And Inside-Outside Painting Of Tarulia Housing Complex In New Town Kolkata Building No 1. Submission Date for this Tender is 29-09-2021. Plumbing and Sanitary Work Tenders in New Town West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (b)Anti-termite treatment to the outside of foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm.dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at arate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981. |
| 2 | Cleaning and removing stains as far as possible from pedestals and bases below statues of sand stone including cleaning ornamental cornice, base moulding curvings sunk panel surface with carborandum block No. 1 of coarse and medium grains of grades 60 and 40 respectively by skilled labour and washing them with soap and soda water. |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] with 1:6 20 mm thk. plaster |
| 4 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (a) 75mm. X 47mm. X 1.70mm. |
| 5 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35mm thik shutter |
| 6 | 32 mm thik shutter |
| 7 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: |
| 8 | Anodisedaluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: |
| 9 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b)Openable steel windows as per IS sizes with side hung shutters and horizontal glazing bars. [The extra rate admissible for the openable portion only] |
| 10 | (iv) Two point nose steel handle including fitting and fixing. For 16 nos. x 8 nos. each |
| 11 | vi) steel peg stay 300 mm long including fitting and fixing. |
| 12 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4.00 mm thk. |
| 13 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 14 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 15 | A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : a) On steel or other metal surface : With super gloss (hi-gloss) # (i) Two coats (with any shade except white) |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With other than hi-gloss of approved quality Two coats (with any shade except white) |
| 17 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes |
| 18 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) # Multilayer (c) 2000 litre capacity |
| 19 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal PVC fittings. White |
| 20 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR whiteflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (i) 900 mm long |
| 21 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc a.#With "P" trap (with vent) |
| 22 | Removing chokage in G.I. pipe including cleaning pipe 15 mm dia. Pipe |
| 23 | 25 mm dia. pipe |
| 24 | Supplying, fitting and fixing bib cock or stop cock. (ii) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm ( bib cock ) |
| 25 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm ( stop cock) |
| 26 | Supplying, fitting and fixing PVC pipes of approved make of (mediumduty) conforming to ASTMD - 1785 and threaded to match with GI Pipesas per IS : 1239 (Part - I). with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow, nipple, longscrew, reducing socket,reducing tee, short piece etc. fitted with holder bats clamps, includingcutting pipes, making threads,fitting, fixing etc. complete in all respectincluding cost of all necessary fittings as required,jointing materials andtwo coats of painting with approved paint in any position above ground.(Payment will be made on the centre line measurements of total pipe lineincluding all specials. No separate payment will be made for accessories,specials. Payment for painting will be made separately) 15 mm dia. Pipe |
| 27 | 25 mm dia. Pipe |
| 28 | Supplying, fitting and fixing low-down cistern parts |
| 29 | Intlet Assembly |
| 30 | Rubber Kid each |
| 31 | Knob each |
| 32 | Cleaning and polishing marble or mosaic partition including removing stains. |
| 33 | Removing chokage of water closet |
| 34 | Cleaning and removing mud upto 2000 litre Water Tank including masonry reservoir |
| 35 | Removing chokage of urinal and waste trap. |
| 36 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm |
| 37 | (a) 75mmDouble Socketed 3 Meter Length |
| 38 | vii) Double Socketed 0.60 Meter Length. (b) 110 mm |
| 39 | xxii) 125/110 S Trap with W.C. Ring 75 mm |
| 40 | xii) Door Bend (LH) & (RH) (b) 110 mm |
| 41 | xv) Vent Cowl (b) 110 mm |
| 42 | xvi) Pipe Clip. (b) 110 mm |
| 43 | iii) Door Tee. (b) 110 mm |
| 44 | (xIvi) Door Cap (a)75 mm |
| 45 | (xIvi) Door Cap (b) 110 mm |
| 46 | D) Solvent Cement 25oml / container |
| 47 | Neat cement punning about 1.5mm thick in wall,dado,window sill,flooretc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 48 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). a.#50 mm dia. |
| 49 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). b.#25 mm dia. |
| 50 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) One Coat Water based interior grade Acrylic Primer |
| 51 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. In Ground |
| 52 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer"s specification) including cleaning and smoothning of surface. Two Coats |
| 53 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 54 | Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 55 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc ANGLO INDIAN Plastic (hallow type) black |
| 56 | Add CGST @6% of total amount to Rs.903338.08 |
| 57 | Add CGST @6% of total amount to Rs.903338.08 |
| 58 | Add Construction Cess @1% of total amount to Rs.903338.08 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
