|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | Supply and fixing of following size of steel conduit along with accessories in the surface/recess incuding painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required |
| 4 | 20 mm |
| 5 | Earthing with G.I. earth pipe 4.5 mtr long 40 mm dia including accessories ,and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal /cokeand salt etc as required. |
| 6 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required. |
| 8 | Laying and fixing of one No. PVC insulated & PVC sheathed/XLPE al conductor cable of 1.1KV gradeof following size on the wall surface as reqd.(clamped with 1mm thick saddle) |
| 9 | Upto 35 sq.mm |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 11 | 2 X 10 Sq,mm (19 mm) |
| 12 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 13 | Supplying and fixing of following rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. of make HAVELLS/ STANDARD/ L&T |
| 14 | Single pole 10/20 AMP |
| 15 | Single Pole & neutral32 AMP |
| 16 | Supplying and fixing 5/6 amps switch make Havells/Anchor piano type/tumbler switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 17 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 18 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (DSR 18/1.14.2) |
| 19 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 20 | Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required of make C&S/STANDARD/HAVELLS/LeGrand. (But without MCB/RCCB/Isolator) |
| 21 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch boxincluding connections but excluding modular plate etc. as required.(Socket Type) |
| 22 | Supplying and fixing four pole, 415 V, 63 A isolatorin the existing MCB DB complete with connection testing and commsisioning etc as required. |
| 23 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB /Isolator) |
| 24 | 8 way, SPN double door |
| 25 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent/LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 26 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Upto 30 CM) with 1.5 Sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 27 | Refixing of 20 mm steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 28 | Supplying, installation, testing and commissioning of LEDluminariesfitting 120 watt crompton make LFLN-120-CDL/60 ncluding all accessories i.e., installation of Led tube on wall/truss with round block, screw etc as required. |
| 29 | Supplyingof 1200 mm sweep capacitor type A.C ceiling fan complete with 30 cm down rod withhangingshackle , blade canopy suitable for 230/240 volt, 50 cycles/sec., single phase supply conforming to ISI-374/1966of make Bajaj/ Crompton cat No. GRACE GOLD/HILL BREEZE as amended from time to time. |
| 30 | S/I/T/C of double door outdoor type free standing rust/dust and weather proof outdoor pedestal (Hut type) of size 1000 x 800 x 350 mm fabricated with 14 SWG CRCA sheet(2mm thick)and angle iron of 50x 50x 6 mm. and flat iron of 40 x 6 mm.with horizontal and vertical intermediate member’s for mounting of separate control gear includingInter connections with copper conductor cable with suitable size of thimbles, lugs etc. & powder coated as reqd.with front and back side opening and locking arrangements with 900 mm long legs of 50 x 50x 6 mm angle iron duly covered from all sides with 600 mm cover plate and suitable hole for cable in / out and cable gland /end termination. The legs should be grounted in cement concrete 1 : 3: 6: base including painting etc. The panel should incorporating the following items: -1. MCCB. 4 pole 100 amp. 16 KA ofmake (MDS/HAVELLS/PROTEC/GE/STD/C&S) = One2. MCCB. 3 pole 100 / 63 amp. 16 KA ofmake (MDS/HAVELLS/PROTEC/GE/STD/C&S) = Three3. 200 amp. rating & 4 strip Al. busbar = one set 4. Voltmeter & selectors switches, Ammeter, CT’S(withHRC fuse) (L & T/C&S make) = 1 Set |
| 31 | Supplying of following size XLPE insulated & PVC tape innersheathed aluminium conductor armoured cable of 1.1 KV grade of following size confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required. |
| 32 | 2 x 10 Sq.mm |
| 33 | Supply of LED street light fitting of 60 watts,AC 240 volts of make Crompton catalog no. LSTP-60-CDL-M ofNEXUS NEO LED made up of streetlight pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP65 protection or its equiavlent of make Bajaj/Havells/Philipscomplete with all accessories etc |
| 34 | P/F of cable termination of M.S. box of size 15cm X 15cm X 10 cm with compression termination arrangements, 6-10 Amp SP MCB and double natural link etc as required. |
| 35 | Supplyof crompton Greaves make or any other equivalent make LED luminiaire of cat. No.IGP 161LT-8-16 fitting with ECO-1 highly robust industrial box type suitable for single T8 LED Tube, LED Tube LT8-20 Wattswith LEDT-8 Tube with in built driver, metal heat sink double sided connection including connection, interconnection etc completed as required. |
| 36 | Supply of LED luminaire comprises of a box type channel, CRCA housingcover with prewired accessories. 1200mm, 2x16 W LED lamp to be directly fitted in the luminaire IGP132LT8-16 of make CROMPTON or equivelant make of Phillips/Havells complete with two NOs1200mm LED tube rod of make Crompton/Phillips/Havells make |
| 37 | I/T/C of prewired street light fittings complete with all accessories on the existing G.I. pipe bracket on pole /wall including wiring & connections as required. |
| 38 | Supply,installation,testing & commissioning of integral well glass luminaire compressed of dia cast canopygear box housing and glass driver surge with heat resistance glass of LED well glass fitting. 40 watt/ Luminous 110 Lm/watt to 125Lm/Wattor Luminous should not be less than 4200 as per direction of Engineer in-charge (crompton/bajaj/Philips make)as per direction of engineer-In-Charge |
| 39 | Credit items for old dismantled non functional ubserviceableHPSV Fitting |
| 40 | Credit items for old dismantled non functional unserviceable 40 W Fl. street light fitting |
| 41 | Credit items for old dismantled non functionalunserviceable 10/20Amps SP MCB |
| 42 | Credit items for old dismantled non functional 6- 32 Amps unserviceable SPN MCB |
| 43 | Credit items for old dismantled non functional unserviceable 36/40 W Fl.Tube Light Fittings |
| 44 | Ctedit Item for old MV Panel including Aluminium Bus Bars, and Switch gears |