Construction Of Community Toilet At 58 Gate Nutan Raster More Under Belari Gp Under Shyampuri Panchayat Samiti Under 15Th Finance Commision
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
24 Sep 2021
0 days left
EMD
13600
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shyampur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Toilet At 58 Gate Nutan Raster More Under Belari Gp Under Shyampuri Panchayat Samiti Under 15Th Finance Commision
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in all sorts of soil ( including mixed soil but excluding lateriat annd sand stone) including removing. Spreading or stacking the spils within a lead of 75 m as directed. |
| 2 | Single layer brick flat soiling with picked jhama bricks in fdn. and plinth including filling up the joints by sand or loose earth. |
| 3 | (I) Cement concrete with graded stone ballast (40 mm size excludingshuttering)In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand.( Do - by fine sand ) |
| 5 | Brick work with 1st class bricks in cement mortar (6:1)(a) In Foundation & Plinth, ground floor (A) FOUNDATION & PLINTH. |
| 6 | (B) SUPERSTRUCTURE |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs beams columns lintels curved or straight including fitting fixing and stricking out after completion of works (upto roof of ground floor ) []A) 25 mm to 30 mm thick wooden shuttering Without staging |
| 9 | with stagging |
| 10 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 11 | Reinforcement(for reinforced cement concrete work) in all sorts of structures incl. distribution bars, stirrups, binders etcof rodsincl. supply initial straightening and removal of loose rust (if necessary) cutting to requisite length, hook and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction.a) TOR STEEL FOR GROUND FLOOR ( Quantity of steel subjected to change)I. SAIL/ TATA/RINL |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)With 3:1 cement mortar, 10 mm thick plaster. Ceiling |
| 13 | 20 mm. thick plaster(1:6) inside ( Gr. Floor ) |
| 14 | 15 mm. thick plaster (1:6)outside( Gr. Floor ) |
| 15 | Neat cement punning 1.5 mm. thick in wall, dado, floor, drain etc. |
| 16 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 0.20kg/Sq.m. |
| 17 | (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m |
| 18 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii)Grill weighing above 10 Kg./sq.mtr up to 16kg/sqmtr. (Add. extra @1% for each addl. floor upto 4th floor)Ground Floor |
| 19 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVCstrip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor. |
| 20 | Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. (iii) 25mm thick shutters.(c) Other Local Wood. |
| 21 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm |
| 22 | Supplying, fitting and fixing bib cock or stop cock.(a) (c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).. [P-6,Item No.7](Sanitary Schedule) |
| 23 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipeMosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (i) For 10 users A) With Pakur variety. (Other than SAIL/TATA/RINL) |
| 24 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).580mmx440mm |
| 25 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. |
| 26 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 27 | White washing including cleaning and smoothening surface thoroughly (5 parts of stone lime and 1 part of shell lime should be used in the finishing coat).All floors : (a) Two coats (on new works only). Inside wall |
| 28 | Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : (ii) External surface (Ground floor)(b) Two coats (on new works only). (i) other than yellow, Pink |
| 29 | Construction of permanent sign board carrying inscription of fund, cost involved, commemcement date & completion date. |
| 30 | GST Charges |
| 31 | Cess |
AI Tender Summary
Tender Timeline
Sep 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender