Various Electrical Mechanical Works To Be Carried At Various Lift Irrigation Schemes Of Sub Div Anantnag- 1 Stabilisation of the HT line by way of errection of 04 Nos tilted steel tubular poles. Before erection , damamged cement bottoming shall be remov, Anantnag-Jammu And Kashmir

Various Electrical Mechanical Works To Be Carried At Various Lift Irrigation Schemes Of Sub Div Anantnag- 1 Stabilisation of the HT line by way of errection of 04 Nos tilted steel tubular poles. Before erection , damamged cement bottoming shall be removed from the ST poles and tilted popular tree banches shall be cut off at LIS KATRITENG. 2 Providing and fitting of 0.05 ACSR Conductorat lis katreteng. 3 providing and Replacing of matting of superior quality to the operator’s room which includes 12mm thermacol, excel and pillows.Heater and some damaged sanitry items for lis GARDSEER 4 P/F of 6mm2 PVC insulator copper wire as service line fitted in PVC channels/conduits. 5 P/F ofHeating point and 06Amp MCB for Lighting. 6 Providing and filling of t-oil to starters at LIS GARDSEER 7 Providing and fitting of link set of reputed make at LIS GARDSEER . 8 Providing and fitting of 65mm CI gate Valve/Ball Valve of upkar make or any reputed make and as per IS standards at khudpora phase 2nd.The job includes dismantling of old damaged Gate valves and fitting of new ones and full load testing at site. 9 Realignment of NRV installed at lis naninar due to misalignment and not working properly due to back pressure and is leaking very much.The job includes cuttingthe NRV along with flangesby way of cutting with gass cutter ,welding machine ,tools and tackles manual labour etcRepairs to the by pass arrangement of departmental pipe from olddraught pump to newdraught pump of section pipe by way of; The jobincludes re - fitting 2inchdia GI pipe 19 mtrs from old to new drought pump for priming,.The job also includesfitting the pipe onholes for both sides of thepipe by gass welding and p/f of new ball valveinch (01no),nipples( 06 no),bends (04 no) etc the job includes engagement of welding set ,tools and tackles.the job also includes full load testing 10 Providing ofnecessary tools for various schemes The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia make:i. D/E Flat Spannerof Size (4/5 to 30/32)(02 complete set)ii. D/E Ring Spanner Set of Size (12/13to 30/32)(02 complete set)iii. Pipe Wrench 12 inch/6 inch: (02 No’s each)

INR 50 /-

INR 1439.0 /-

INR 47950.0 /-