}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 29227902

    • Third Party Inspection Services For Inspections At Vendors / Contractors Premises Third Party Inspection Services For Inspections At Vendors / Contractors Premises, Mumbai-Maharashtra

    Indian Oil Corporation Limited-IOCL has published Third Party Inspection Services For Inspections At Vendors / Contractors Premises Third Party Inspection Services For Inspections At Vendors / Contractors Premises. Submission Date for this Tender is 30-09-2021. Third Party Inspection Services Tenders in Mumbai Maharashtra. Bidders can get complete Tender details and download the document.




    Tender Notice

    29227902
    Corrigendum : Third Party Inspection Services For Inspections At Vendors / Contractors Premises Third Party Inspection Services For Inspections At Vendors / Contractors Premises
    Open Tender
    Indian
    Maharashtra
    Mumbai
    30-09-2021

    Tender Details

    Third Party Inspection Services For Inspections At Vendors / Contractors Premises Third Party Inspection Services For Inspections At Vendors / Contractors Premises

    Corrigendum Details

    Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
    1 29-Sep-2021 Bid submission date extended Date 30-09-2021

    Key Value

    Document Fees
    Refer document
    EMD
    Refer document
    Tender Value
    Refer document

    BOQ Items

    1
    Sl. No. Item Description
    1Internal Heating Coils for Additive Storage tanks for Hot Thermic oil heating provision (Qty - 25 Nos)
    2Finished Product (Lube) Storage Tanks – Atmospheric, Toriconical / flat bottom, Cone top, Cylindrical vertical, above ground tanks; (Qty - 26 Nos) (i.e. 3 Nos of SS 304 & 23 Nos of CS)
    3Internal Heating Coils for Finished Product Storage tanks for Hot Thermic oil heating provision (Qty - 45 Nos)
    4Above ground, Cylindrical, Horizontal storage tanks for Slop oil (Qty - 02 Nos)
    5Total for S.No. 2.01 -CATEGORY - A-1 : TPI SERVICES FOR SHOP FABRICATED STORAGE TANKS
    6A-2 : SHOP FABRICATED – PROCESS TANKS, VESSELS & COLUMNS
    7These cover the shop fabricated process equipment – viz. Heat Exchangers, Tanks, Vessels, Columns etc. that will be shop fabricated by the Mechanical Vendors at their own or sub-contractor’s shop.Details of work scope shall be as per RFQ Doc. (Category-A-2).
    8Suction Heaters & Heat Exchangers; CS (Qty - 43 Nos)
    9Blending or Premix Vessels – Agitated with/without Heating Coils; CS (Qty - 05 Nos)
    10Bituminous Lube Finishing tanks with side entry agitators(Qty - 02 Nos)
    11Blending or Premix Vessels – Agitated with/without Heating Coils; SS (Qty - 07 Nos)
    12Mini-bulk Tanks for Additive handling – Agitated with/without Heating Coils; CS (Qty - 38 Nos)
    13Percolation columns; CS (Qty - 10 Nos)
    14Rinsing Tank / Slop oil Tanks; CS (Qty - 04 Nos)
    15HDPE process tanks for DEF, Coolant(Qty - 09 Nos)
    16WO Plant Mixing Tanks with Heating Coil - CS(Qty - 02 Nos)
    17WO Holding Tanks & TO Finished Product tanks - CS(Qty - 08 Nos)
    18Finished Product Tanks for WO & BF Plant - SS(Qty - 04 Nos)
    19Sub-Total for S.No. 2.02 -CATEGORY - A-2 : SHOP FABRICATED – PROCESS TANKS, VESSELS & COLUMNS
    20A-3 : TPI FOR BULK MATERIALS & MISCELLANEOUS ITEMS
    21This will cover the Third party inspection for various Bulk materials, PEB works, HVAC Systems & other similar items of works as the details below. Details of work scope shall be as per RFQ Doc. (Category-A-3).
    22TPI FOR BULK MATERIALS
    23Steel plates, Structural materials of various thicknesses & sizes for Fabrication works
    24Cables (Aluminium & Copper) of various ratings & capacities
    25Pipes & Pipe fittings of various sizes
    26TPI FOR PRE ENGINEERED BUILDINGS (PEB) & RELATED WORKS
    27TPIA for Pre Engineered Buildings (PEB), Structurals, Roofing sheets, Cladding sheets, Turbo Ventilators, Gutters, Down take pipes, etc.,
    28TPI FOR HVAC SYSTEMS
    29TPIA for HVAC Systems for Process block, Admin block, Laboratory, Utility block, etc.,
    30Sub-Total for S.No. 2.03 -CATEGORY - A-3 : TPI FOR BULK MATERIALS & MISCELLANEOUS ITEMS
    31A-4 : PROCESS PUMPS, FILTERS, AGITATORS & MISCELLANEOUS PROCESS EQUIPMENTS
    32These cover the Process Pumps, Filters –that will be bought out items by the Mechanical Vendors. Details of work scope shall be as per RFQ Doc. (Category-A-4).
    33Positive displacement – Twin Screw pumps; CS (Qty - 122 Nos)
    34Positive displacement – Single Screw (peristaltic) pumps; CS (Qty - 29 Nos)
    35Positive displacement – Three Screw Pumps; CS (Qty - 34 Nos)
    36Centrifugal Pumps; SS (Qty - 29 Nos)
    37Filters – PP Bag; CS / PP (Qty - 60 Nos)
    38Filters – PP Bag; SS / PP (Qty - 25 Nos)
    39Superclean Filteration system; SS (Qty - 03 Nos)
    40DEF Filtration System (Qty - 02 Nos)
    41Drum Pumps (Qty - 24 Nos)
    42Tank Agitators (Qty - 03 Nos)
    43Screw Scrapper Chiller (Qty - 01 No)
    44Weighing Scales (Qty - 09 Nos)
    45Static Mixers (Qty - 07 Nos)
    46Exhaust Blower for VDU (Qty - 1 No)
    47Sub-Total for S.No. 2.04 -CATEGORY - A-4 : PROCESS PUMPS & FILTERS, AGITATORS & MISCELLANEOUS PROCESS EQUIPMENTS
    48A-5 : PROCESS SKIDS
    49These cover the Process Skids such as Vacuum Filtration System skid –that will be bought out items by the Mechanical Vendors.Details of work scope shall be as per RFQ Doc. (Category-A-5). For inspection of SKIDS, it is considered that a cross-functional team comprising of Mechanical, Electrical and Instrumentation fields – will be deputed so as to check all aspects as per the design, tie-in points & integration with the main plant system.
    50DM Water Treatment plant(Qty - 1 No)
    51Vacuum Filtration plant skids (for WO & Transformer oil plant) (Qty - 04 Nos)
    52Powder Handling system (for Grease, DEF, TO & Coolant plant) (Qty - 11 Nos)
    53Scrubber System – for Grease Plant (Qty - 04 Nos)
    54Sub-Total for S.No. 2.05 -CATEGORY - A-5 : PROCESS SKIDS
    55A-6 : CORE FILLING LINES (LOCAL)
    56These cover the CORE FILLING LINES that will be sourced Locally and supplied by MECHANICAL VENDOR and are proposed to be automated and complete from Unscrambler or feeding of empties to final palletization, duly synchronized to operate at the desired rated speed. Details of work scope shall be as per RFQ Doc. (Category-A-6).
    57Small Can filling lines(Qty - 04 Nos) a) for Lube b) for Coolant & BF c) for DEF d) for Grease
    58Pail Filling lines(Qty - 05 Nos) a) Lube b) DEF c) Lube Drummies (26L, 28L, 50L) d) Grease
    59Pallet fillers(Qty - 05 Nos) a) for Lube b) for Coolant / Brake fluid c) for DEF d) for Pilot Lube Kettle e) for BN Extract
    60Drum filling lines(Qty - 09 Nos) a) Bituminous Lube b) Transformer Oil c) White Oil d) REX e) Greases
    61Sub-Total for S.No. 2.06 - CATEGORY - A-6 : CORE FILLING LINES (LOCAL)
    62A-7 : UTILITY SYSTEMS
    63These cover the following UTILITY SYSTEMS that will be sourced Locally and supplied by MECHANICAL VENDOR Details of work scope shall be as per RFQ Doc. (Category-A-7).
    64Instrument and Plant Air Package :-
    65i) Air compressors, Heavy Duty Industrial Rotary Screw type, with 400 LPS capacity each - (2 working + 1 spare); complete with central control system for the package (Qty - 03 Nos)
    66ii) Air receiver with 7500 L capacity(Qty - 02 Nos)
    67iii) Air Dryer with 800 LPS capacity(Qty - 02 Nos) (1 working + 1 spare)
    68iv) Air receiver with 1.5 m3 capacity(Qty - 01 No)
    69v) Air receiver wih 3 m3 capacity(Qty - 01 No)
    70Cooling Tower Package :-
    71i) 600 TR Cooling Tower unit
    72ii) Recirculation Pumps (Qty - 02 Nos)
    73Chiller and Cold Oil Package :-
    74i) Chiller unit (2 x 125 TR) (Qty - 01 No)
    75ii) Chilled Water Tank of required capacity (Qty - 01 No)
    76iii) Gasketed Plate type Heat Exchanger (Qty - 01 No)
    77iv) Pumps for Chilled water (2 working + 1 spare) (Qty - 03 Nos)
    78v) Cold oil Tank (Qty - 01 No)
    79vi) Cold oil Recirculation Pumps (Qty - 02 Nos)
    80Thermic Fluid Heater Package :-
    81i) Thermic Fluid Heaters of TPD-25 (Qty - 02 Nos)
    82ii) Higher capacity Pumps - 200 m3/hr (2 working + 1 spare) (Qty - 03 Nos)
    83iii) Dearator cum Expansion Tank - 12 KL (Qty - 01 No)
    84iv) Thermic Fluid Heaters of TPD-15 (Qty - 01 No)
    85v) Higher capacity Pumps - 120 m3/hr (1 working + 1 spare) (Qty - 02 Nos)
    86vi) Dearator cum Expansion Tank - 6 KL (Qty - 01 No)
    87vii) Sump Tank - 22 KL (Qty - 01 No)
    88viii) Pump for Topping up Thermic oil - 6 m3/hr (Qty - 01 No)
    89ix) Day Tanks for Fuel oil - 990 Ltrs (Qty - 03 Nos)
    90x) Secondary Heating System - 12 KL (Qty - 02 Nos)
    91xi) Pumps for Secondary Heating System - 45 m3/hr (Qty - 02 Nos)
    92Non-IBR Boiler Package :-
    93i) Boiler unit - 300 kg/hr (Qty - 02 Nos)
    94ii) LDO Day Tanks - 990 Ltrs (Qty - 02 Nos)
    95iii) Day Tank for Water Storage - 6 KL (Qty - 01 No)
    96iv) Boiler Feed Water Tank - 3 KL (Qty - 01 No)
    97v) Condensate recycling system & Collection Tank (Qty - 01 No)
    98vi) Steam Separators (Qty - 02 Nos)
    99vi) Steam pressure reducing station - 600 kg/hr (Qty - 01 No)
    100vii) Filters (Qty - 04 Nos)
    101viii) Fuel pumps for LDO Tanks (Qty - 02 Nos)
    102ix) Feed water pumps (Qty - 02 Nos)
    103Chimney for Thermic fluid heaters & Steam Boilers – 1m dia at top x 40m high; (Qty - 01 No)
    104Oily Water Separator Package :-
    105i) OWS system - 200 LPS (for BO-1, BO-2 tank farms & TLF Gantry area) (Qty - 01 No)
    106ii) OWS system - 100 LPS (for Additive, FP Tank farms 1 & 2, Additive Unloading Gantry and Scrap yard areas) (Qty - 01 No)
    107Weighbridge, 60 MT (Qty - 02 Nos)
    108Fuel Storage tanks – for LDO & HSD storage (Qty - 02 Nos)
    109Vertical Submersible Transfer pumps for LDO & HSD with FLP motor (Qty - 02 Nos)
    110Vacuum Pump with Air water Separator (Qty - 01 No)
    111Raw Water tank (Qty - 02 Nos), Permeate Tank (Qty - 02 Nos), Reject water tanks (Qty - 02 Nos)
    112Sub-Total for S.No. 2.07 -CATEGORY - A-7 : UTILITY SYSTEMS
    113A-8 : LABORATORY EQUIPMENTS
    114These cover the following LABORATORY EQUIPMENTS & SYSTEMS that will be sourced Locally and supplied by PACKAGE-1 VENDOR. Details of work scope shall be as per RFQ Doc. (Category-A-8).
    115LUBE, GREASE AND SPECIALITY PRODUCTS TESTING EQUIPMENT
    116COLOUR COMPARATOR (TECH SPECS A01) (Qty - 02 Set)
    117AUTO DENSITYMETER (TECH SPECS A02) (Qty - 01 Set)
    118STABINGER VISCOMETER SVM 4001 AUTOMATIC (TECH SPECS A03) (Qty - 03 Set)
    119AUTOMATICVISCOMETER (TECH SPECS A04) (Qty - 02 Set)
    120LOW TEMPERATURE VISCOSITY BATH (0,-20,-30,-40 °C) (TECH SPECS A05) (Qty - 01 Set)
    121KINEMATIC VISCOSITY @ 100°C [MANUAL BATH ] FOR BITUMEN SAMPLE (TECH SPECS A06) (Qty - 03 Set)
    122AIR RELEASE VALUE APPARATUS AND SOFTWARE (TECH SPECS A07) (Qty - 01 Set)
    123COC FLASH POINTER TESTER (TECH SPECS A10) (Qty - 01 Set)
    124PMCC TESTER AUTOMATIC (TECH SPECS A11) (Qty - 01 Set)
    125FOURIER TRANSFORM INFA RED SPECTROPHOTOMETER (TECH SPECS A13) (Qty - 01 Set)
    126PARTICLE COUNTER (TECH SPECS A15) (Qty - 01 Set)
    127AUTOMATIC TITRATOR FOR TBN AND TAN (TECH SPECS A16_17) (Qty - 01 Set)
    128WATER SEPARABILITY CHARACTERISTIC BATH (TECH SPECS A19) (Qty - 04 Set)
    129FOAMING APPARATUS I II III IV (TECH SPECS A20) (Qty - 02 Set)
    130SHEAR STABILITY APPARATUS - BOSCH INJECTOR (TECH SPECS A24) (Qty - 01 Set)
    131AUTO ANILINE POINT APPARATUS (TECH SPECS A29) (Qty - 02 Set)
    132NITROGEN ANALYSER (TECH SPECS A32) (Qty - 01 Set)
    133AUTO MELTING POINT APPARATUS (TECH SPECS A33) (Qty - 01 Set)
    134UV - VISIBLE SPECTRO PHOTOMETER (TECH SPECS A34) (Qty - 01 Set)
    135REFRACTIVE INDEX -Refractometer (TECH SPECS A35) (Qty - 02 Set)
    136DIGITAL Ph ANALYZER (TECH SPECS A36) (Qty - 01 Set)
    137TDS METER (TECH SPECS A37) (Qty - 01 Set)
    138GAS CHROMATOGRAPH (TECH SPECS A38 &A39) (Qty - 01 Set)
    139GAS CHROMATOGRAPH (TECH SPECS A38 &A39) (Qty - 01 Set)
    140HPLC APPARATUS (HIGH PERFORMANCE LIQUID CHROMATOGRAPHY) FOR TOTAL POLAR & AROMATICS (TECH SPECS A40) (Qty - 01 Set)
    141PARTICLE COUNTER (TECH SPECS A15) (Qty - 01 Set)
    142INTERFACIAL TENSION TEST EQUIPMENT (TECH SPECS A44) (Qty - 01 Set)
    143OXIDATION STABILITY BATH FOR MINERAL OIL (TECH SPECS A45) (Qty - 01 Set)
    144ERBP (EQUILIBIRIUM REFLUX BOILING POINT ) TESTER (TECH SPECS A46) (Qty - 01 Set)
    145LOW TEMPERATURE VISCOSITY BATH (0,-20,-30,-40 °C) (TECH SPECS A05) (Qty - 01 Set)
    146FOAMING TEST APPARATUS SEQ IV (TECH SPECS A49) (Qty - 01 Set)
    147CIRCULATORY CORROSION TESTER (TECH SPECS A50) (Qty - 01 Set)
    148AUTOMATIC FREEZING POINT APPARATUS (TECH SPECS A51) (Qty - 01 Set)
    149VACUUM PUMP (TECH SPECS M01) (Qty - 01 Set)
    150WATER PURIFIER (FOR ICP/CHEMICAL PREPARATION) (TECH SPECS M02) (Qty - 02 Set)
    151MUFFLE FURNACE (TECH SPECS M03) (Qty - 02 Set)
    152HOT PLATE (TECH SPECS M04) (Qty - 07 Set)
    153HEATING MENTLE (TECH SPECS M05) (Qty - 09 Set)
    154WATER BATH (TECH SPECS M06) (Qty - 02 Set)
    155LABORATORY FRITZ (SET ON CONSTANT TEMPERATURE ) FOR CRMS/CHEMICALS (TECH SPECS M07) (Qty - 02 Set)
    156LABORATORY STIRRER (TECH SPECS M08) (Qty - 06 Set)
    157MILLIPORE VACUUM FILTRATION UNIT (TECH SPECS M09) (Qty - 02 Set)
    158SONIC VIBRATOR WATER BATH (TECH SPECS M10) (Qty - 02 Set)
    159MICRO BURETTE DIGITAL (TECH SPECS M11) (Qty - 04 Set)
    160FIXED VOLUME DISPENSERS (TECH SPECS M12) (Qty - 10 Set)
    161TOP LOADING BALANCE (0.01 GM LC) 1000 gm (TECH SPECS M13) (Qty - 03 Set)
    162TOP LOADING BALANCE (0.01 GM LC) 5000 gm (TECH SPECS M14) (Qty - 03 Set)
    163ANANLYTICAL BALANCE SINGLE PAN 220 GM LC 0.1 MG. (TECH SPECS M15) (Qty - 03 Set)
    164ANANLYTICAL BALANCE SINGLE PAN 220 GM LC 0.01 MG. (TECH SPECS M16) (Qty - 03 Set)
    165DESSICATORS (TECH SPECS M17) (Qty - 06 Set)
    166SETA TIMER-STOP WATCHES CALIBRATED (TECH SPECS M18) (Qty - 07 Set)
    167LABORATORY CENTRIFUGE (TECH SPECS M19) (Qty - 01 Set)
    168WATER CONTENT _DEAN AND STARK (TECH SPECS M20) (Qty - 02 Set)
    169CANON FENSKE VISCOMETER TUBES (IMPORTED) (TECH SPECS M21) (Qty - 24 Set)
    170THERMOMETERS (TECH SPECS M22) (Qty - 01 Set)
    171HOT AIR OVEN BIG (TECH SPECS M23) (Qty - 05 Set)
    172HOT AIR OVEN MEDIUM (TECH SPECS M24) (Qty - 05 Set)
    173HIGH TEMPERTURE OVEN (TECH SPECS M24A) (Qty - 02 Set)
    174GLASS ASSEMBLY, LOCAL GLASS WARE/EQUIPMENTSUPPLIERS (Qty - 05 Set)
    175GREASE PENETROMETER (TECH SPECS B01) (Qty - 03 Set)
    176CORROSION PREVENTIVE PROPERTIES OF LUBRICATING GREASES (TECH SPECS B02) (Qty - 01 Set)
    177SALT SPRAY (FOG) APPARATUS (TECH SPECS B03) (Qty - 01 Set)
    178WATER WASHOUT CHARACTERISTICS OF LUBRICATING GREASES APPARATUS (TECH SPECS B04) (Qty - 01 Set)
    179WATER SRAY APPARATUS (TECH SPECS B05) (Qty - 01 Set)
    180WATER - CONTENT : COULOMETER (TECH SPECS B06) (Qty - 01 Set)
    181ROLL STABILITYTESTER (TECH SPECS B07) (Qty - 02 Set)
    182OIL SEPARATION FROM LUBRICATING GREASE DURINGSTORAGE (TECH SPECS B08) (Qty - 01 Set)
    183OIL SEPARATIONTEST APPARATUS- CONICAL SIEVE METHOD (TECH SPECS B09) (Qty - 01 Set)
    184DELETERIOUS PARTICLES TESTER (TECH SPECS B10) (Qty - 01 Set)
    185DROPPING POINT APPARATUS - AUTOMATIC (TECH SPECS B11) (Qty - 02 Set)
    186AUTOMATICVISCOMETER (TECH SPECS A04) (Qty - 01 Set)
    187VISCOSITY OIL BATH (TECH SPECS B13) (Qty - 01 Set)
    188OXIDATION STABILITY TESTER FOR GREASE (TECH SPECS B14) (Qty - 01 Set)
    189PRESSURE DIFFERENTIAL SCANNING CALORIMETER (TECH SPECS B15) (Qty - 01 Set)
    190HUMIDITY CABINET (TECH SPECS B16) (Qty - 01 Set)
    191LOW-TEMPERATURE TORQUE APPARATUS (TECH SPECS B17) (Qty - 01 Set)
    192FRETTING WEAR TESTER (TECH SPECS B18) (Qty - 01 Set)
    193AIR CIRCULATORY OVEN WITH TEMP RANGE AMBIENT TO 200 DEG.C +/- 0.5 DEGC (Qty - 01 Set)
    194WHEEL BEARING LEAKAGE TENDENCIES TESTER (TECH SPECS B20) (Qty - 01 Set)
    195COPPER STRIP CORROSION TESTER WITH CORROSION TEST BOMB BATH (TECH SPECS B21) (Qty - 01 Set)
    196EVAPORATION LOSS TESTER (TECH SPECS B22) (Qty - 01 Set)
    197APPARENT VISCOSITY APPARTUS - PRESSURE VISCOMETER (TECH SPECS B23) (Qty - 01 Set)
    198FOUR BALL TESTER (TECH SPECS B24) (Qty - 01 Set)
    199TIMKEN OK LOAD TESTER (TECH SPECS B25) (Qty - 01 Set)
    200WELD LOAD - FOUR-BALL METHOD (TECH SPECS B26) (Qty - 01 Set)
    201EMCOR TESTER (TECH SPECS B27) (Qty - 01 Set)
    202AUTO DENSITYMETER (TECH SPECS A02) (Qty - 01 Set)
    203CLOUD & POUR POINT TESTING APPARATUS (TECH SPECS B29) (Qty - 01 Set)
    204REFRACTIVE INDEX -Refractometer(TECH SPECS A35) (Qty - 01 Set)
    205GLASS ASSEMBLY, LOCAL GLASS WARE/EQUIPMENTSUPPLIERS (Qty - 02 Set)
    206FOURIER TRANSFORM INFA RED SPECTROPHOTOMETER (TECH SPECS A13) (Qty - 01 Set)
    207UV - VISIBLE SPECTRO PHOTOMETER (TECH SPECS A34) (Qty - 01 Set)
    208BROOKFIELDVISCOMETER (TECH SPECS B34) (Qty - 01 Set)
    209DIGITAL MICROSCOPE FOR LAB APPLICATION (TECH SPECS B35) (Qty - 01 Set)
    210AUTO MELTING POINT APPARATUS (TECH SPECS A33) (Qty - 01 Set)
    211LOW-TEMPERATURE TORQUE APPARATUS (TECH SPECS B17) (Qty - 01 Set)
    212DIGITAL Ph ANALYZER (TECH SPECS A36) (Qty - 01 Set)
    213GAS CHROMATOGRAPH (TECH SPECS A38 &A39) (Qty - 01 Set)
    214ELECTRIC MUFFLE FURNACE (TECH SPECS B40) (Qty - 01 Set)
    215BOX COMPRESSION STRENGTH TESTER (TECH SPECS PM01) (Qty - 01 Set)
    216CARTON BURSTING STRENGTH TESTER (TECH SPECS PM02) (Qty - 01 Set)
    217WEIGHING BALANCE 250 KG LC 0.1 KG (TECH SPECS PM04) (Qty - 01 Set)
    218WEIGHING BALANCE 20 KG LC 0.01 KG (TECH SPECS PM05) (Qty - 01 Set)
    219DIGITAL TOP LOADING BALANCE 500 GMLC 0.01 GM (TECH SPECS PM06) (Qty - 01 Set)
    220ANANLYTICAL BALANCE SINGLE PAN 220 GM LC 0.1 MG. (TECH SPECS M15) (Qty - 01 Set)
    221MOISTURE ANALYZER - HANDY FOR CARTON (TECH SPECS PM08) (Qty - 01 Set)
    222DIGITAL MICROMETER - SCREW CALIPER (TECH SPECS PM09) (Qty - 01 Set)
    223VERNIER DIGITAL CALIPER (TECH SPECS PM10) (Qty - 01 Set)
    224HEIGHT GAUGE (DIGITAL) (TECH SPECS PM11) (Qty - 01 Set)
    225CONDITIONING CHAMBER (TECH SPECS PM12) (Qty - 01 Set)
    226ELCOMETER FOR PAINT THICKNESS (TECH SPECS PM13) (Qty - 01 Set)
    227MELT FLOW INDEX TESTER (TECH SPECS PM14) (Qty - 01 Set)
    228VIBRATION TESTERMACHINE (TECH SPECS PM15) (Qty - 01 Set)
    229TENSILE STRENGTH TESTER (TECH SPECS PM16) (Qty - 01 Set)
    230PENDULUM IMPACT RESISTANCE TESTER (TECH SPECS PM17) (Qty - 01 Set)
    231BALOON BURSTING TESTER (TECH SPECS PM18) (Qty - 01 Set)
    232FIXED VOLUME MEASURE WITH CERTIFICATION OF WEIGHT & MEASURES.- LOCAL EQUIP.SUPPLIER (Qty - 01 Set)
    233PEEL ADHESION TESTER (TECH SPECS PM20) (Qty - 01 Set)
    234Sub-Total for S.No. 2.08 -CATEGORY - A-8 : LABORATORY EQUIPMENTS
    235A-9 : ELECTRICAL SYSTEMS
    236These cover the following ELECTRICAL SYSTEMS that will be sourced Locally and supplied by PACKAGE-1 VENDOR: The tests listed below shall be read in conjunction with Indian Oil Corporation Limited (IOCL) technical specifications and approved Inspection Test Plans (ITP)/ Quality Assurance Plans (QAP) of vendor. Any additional tests required to be conducted as per IOCL specifications shall be performed by TPIA/ Vendor. All internal test reports, raw material test reports, in-process test reports as defined in ITP/QAP shall be reviewed by TPIA. All tests shall be performed and checked for compliance to latest IOCL approved vendor documents. Details of work scope shall be as per RFQ Doc. (Category-A-9).
    237HV Switchgear (3 Panels)
    238Transformers (Power - 2 Nos & Distribution - 10 Nos)
    239LV Switchgear (PCC - 6 Nos & MCC - 25 Nos)
    240APFC Panel (5 Nos)
    241Diesel Generator (3 Nos)
    242Distribution Boards
    243Cable trays & Raceways (1 Sample)
    244UPS (25 Nos approx.)
    245Lighting
    246High Mast (1 Sample)
    247Solar PV System (2300 kWP)
    248Electric Heat Tracing
    249Sub-Total for S.No. 2.09 -CATEGORY - A-9 : ELECTRICAL SYSTEMS
    250A-10 : CORE PROCESS EQUIPMENTS – BULK INSTRUMENTS SUPPLY (ON-SHORE WITHIN INDIA)
    251These cover the supply of INSTRUMENTS that are part of CPE scope, which will be supplied by PROCESS VENDORS (ONSHORE - within India). Details of work scope shall be as per RFQ Doc. (Category-A-10).
    252INSTRUMENTS & VALVES
    253ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)
    25425 NB (Medium temperature service) (Qty - 331 Nos)
    25525 NB (High temperature service) (Qty - 01 No)
    25640 NB (Medium temperature service) (Qty - 134 Nos)
    25750 NB (Medium temperature service) (Qty - 200 Nos)
    25850 NB (High temperature service) (Qty - 30 Nos)
    25980 NB (Medium temperature service) (Qty - 462 Nos)
    26080 NB (High temperature service) (Qty - 233 Nos)
    261100 NB (Medium temperature service) (Qty - 396 Nos)
    262100 NB (High temperature service) (Qty - 184 Nos)
    263150 NB (Medium temperature service) (Qty - 99 Nos)
    264Flush Bottom ball valve- Solenoid operated
    26550 NB (Qty - 01 No)
    26680 NB (Qty - 18 Nos)
    267150 NB (Qty - 14 Nos)
    2683 Way ON-Off valve ( 1 no. inlet & 2 nos. outlet - 1 at a time only)
    26950 NB (Qty - 04 Nos)
    27080 NB (Qty - 38 Nos)
    271100 NB(Qty - 68 Nos)
    272ON-OFF Valve -Solenoid operated single/double acting actuator (MOC - SS)
    27325 NB (Qty - 22 Nos)
    27440 NB (Qty - 16 Nos)
    27550 NB (Qty - 48 Nos)
    27680 NB (Qty - 72 Nos)
    277100 NB (Qty - 07 Nos)
    278ON-OFF valve with fail retain last position in the case signal/power failure,
    27925 NB (Qty - 04 Nos)
    280100 NB (Qty - 03 Nos)
    281150 NB (Qty - 44 Nos)
    282Supply of Motor operated ON-OFF valve (Electrical motor operated actuator)
    283200 NB (Qty - 17 Nos)
    284Supply of Pressure Control Valve- Modulating type
    28515 NB (for line size 25 NB) (Qty - 14 Nos)
    28625 NB(for line size 40 NB) (Qty - 01 No)
    28740 NB (for line size 50 NB) (Qty - 07 Nos)
    28850 NB (for line size 80 NB) (Qty - 67 Nos)
    28980 NB (for line size 100 NB) (Qty - 31 Nos)
    290Temperature Control Valve - Modulating type
    29125 NB (for line size 50 NB) (Qty - 03 Nos)
    29250 NB (for line size 80 NB) (Qty - 08 Nos)
    293Flow Control valve - Modulating type
    29415 NB (for line size 25 NB) (Qty - 09 Nos)
    29525 NB (for line size 40 NB) (Qty - 11 Nos)
    29640 NB (for line size 50 NB) (Qty - 03 Nos)
    29750 NB (for line size 80 NB) (Qty - 23 Nos)
    29880 NB (for line size 100 NB) (Qty - 02 Nos)
    299Self Regulating Pressure control valve
    30015 NB(for line size 25 NB) (Qty - 01 No)
    30125 NB(for line size 40 NB) (Qty - 01 No)
    30240 NB(for line size 50 NB) (Qty - 01 No)
    30350 NB(for line size 80 NB) (Qty - 04 Nos)
    30480 NB(for line size 100 NB) (Qty - 32 Nos)
    305100 NB(for line size 100 NB) (Qty - 01 No)
    306150 NB(for line size 200 NB) (Qty - 13 Nos)
    307Air Filter Regulator
    30825 NB for air headers inlet (Qty - 376 Nos)
    30925 NB (Qty - 134 Nos)
    31040 NB (Qty - 01 No)
    311Metering skid for loading of tankers (MOC - CS) (Qty - 14 Nos)
    312Metering skid for loading of tankers (MOC - SS) (Qty - 08 Nos)
    313Flow control Valve in CS contact parts(Qty - 14 Nos)
    314Flow control Valve, in SS contact parts (Qty - 09 Nos)
    315Loading armof size 80 mm NBwith all contact parts inSS(Qty - 22 Nos)
    316ROSOV"s
    317100 NB(Qty - 22 Nos)
    318150 NB(Qty - 36 Nos)
    31950 NB ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)(Qty - 04 Nos)
    32080 NB ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)(Qty - 35 Nos)
    321Review of Manufacturer"s Test Certificates and acceptance against of materials against the same (W/O FAT); (Qty - 65 Nos)
    322Sub-Total for S.No. 2.10 -CATEGORY - A-10 : CORE PROCESS EQUIPMENTS – BULK INSTRUMENTS SUPPLY (ON-SHORE WITHIN INDIA)
    323A-11 : FIRE FIGHTING SYSTEM & FIRE ALARM SYSTEM
    324These cover the following FIRE HYDRANT SYSTEM, SPRINKLER SYSTEM, DELUGE SYSTEM & FIRE-ALARM SYSTEMS that will be sourced locally and supplied by Package-1 (CIVIL) VENDOR. Details of work scope shall be as per RFQ Doc. (Category-A-11).
    325FIRE FIGHTING SYSTEM
    326Diesel Engine Fire Pump (Qty - 02 Set)
    327Jockey Pump (Qty - 02 Set)
    328Diesel Engine Pump Panel (Qty - 01 Set)
    329Jockey Pump Panel (Qty - 01 Set)
    330Deluge System(Qty - 12 Set)
    331FM200 Fire Extinguishing System & Panel (Qty - 03 Lot)
    332FIRE FIGHTING SYSTEM - CONTROL PANELS
    333Fire Alarm Control Panel (Qty - 02 Set)
    334Repeater Panel (Qty - 02 Set)
    335Annunciator Panel (Qty - 03 Set)
    336Sub-Total for S.No. 2.11 -CATEGORY - A-11 : FIRE FIGHTING SYSTEM & FIRE ALARM SYSTEM
    337A-12 : SECURITY SYSTEMS
    338These cover the CCTV & Access Control systems that will be sourced Locally and supplied by Package-1 (CIVIL) VENDOR.Following is the estimated items & their respective quantities required to be covered during FAT by TPI. Details of work scope shall be as per RFQ Doc. (Category-A-12).
    339HD IP Fixed POE based Bullet camera with IR and MFZ lens (4K Resolution) along with allmounting accessories (Qty - 83 Nos)
    340HD IP Fixed POE based Dome camera with IR and MFZ lens (4K Resolution) along with allmounting accessories (Qty - 44 Nos)
    341HD IP PTZ Camera (5MP) along with POE+ injector and mounting accessories (Qty - 47 Nos)
    342HD IP fixed Automatic Number plate Recognition POE based camera (ANPR - 4K Resolution) along with all mounting accessories (Qty - 04 Nos)
    3438 port Industrial grade layer 2Managed POEbased Ethernet Switch with 4 (four) 10/100/1000T(X) RJ-45 ports and 4 (four) combo 10/100/1000T(X) RJ-45 ports / 100/1000FX ports & surge protection (Qty - 67 Nos)
    34424 port Industrial grade layer 2Managed POEbased Ethernet Switch 12 (twelve) Gigabit 10/100/1000TX RJ-45 PoE ports and 12 (twelve) Gigabit 100/1000Base-FX SFP ports and surge protection (Qty - 12 Nos)
    345Indoor weatherproof housing (IP 65 or better) suitable for installing Layer 2 switch,PSU, LIU and adaptor for Ethernet switch/media convertor surge protectors and other accessories of CCTV cameras (Qty - 44 Nos)
    346Wall / Pole mounted Network Rack-minimum 6U 19" Rack / Enclosure (Qty - 35 Nos)
    347Heavy Duty self-supported Hot Dip GalvanizedPoles(8-10 M pole with cantilever arrangement for mounting (Qty - 90 Nos)
    348CCTV Management Server (s) including failover redundancy (Qty - 02 Nos)
    349CCTV Recording Server (s) including failover redundancy (Qty - 05 Nos)
    350Command and Control Management & Application Server (s) including failover redundancy (Qty - 02 Nos)
    351Command and Control Database and OIS Server (s) including failover redundancy (Qty - 02 Nos)
    352Video Analytical and ANPR Server (s) (Qty - 05 Nos)
    353900 TB Storage Attached Network (SAN) (Qty - 03 Nos)
    35465" LED High Definition LED Display monitor (Qty - 06 Nos)
    355CCTV client work station along with client software, 42" LED Monitor, key board, mouse (Qty - 04 Nos)
    356Layer 3 Managed Gigabit Ethernet Switch with minimum 28 ports loaded with 14 nos. of SFP SM transceivers (1000 base LX) and other accessories (Qty - 02 Nos)
    357Advanced software solution for Security Video Management software with command and control centers capable of handling critical alarm with suggestion of appropriate actions and counter measures.
    358Advanced Analytics Software (Qty - 01 Lot)
    35942 U Rack Enclosure cabinet/System cabinet (Qty - 02 Nos)
    360Parallel redundant UPS (Qty - 02 Nos)
    361All types of CCTV Cables including network, Power and Fiber optic cables. (Qty - 16,210 Mtrs)
    362Access Control Management & Identity Management Software License supporting500,000 cardholders, Access Control Software seamlessly integrated with Command & Control software and PAS. Additional software like Visitor Management module, Guard Tour module, Graphical module, shall also be included. supporting a minimum of 5 nos. clients (inclusive of client license) for workstation (Admin, Monitoring or Web Client), LDAP Support
    363Two Reader Access Controller , supporting one entry and one exit reader, 24VAC power supply unit and with all accessories (Qty - 21 Nos)
    364Touchless Biometric reader complete with fingerprint encoding. (Qty - 05 Nos)
    365Multi-Technology Smart card Reader capable of reading and supporting all card formats (Qty - 19 Nos)
    366Outdoor enclosure with Multi-Technology Smart card Reader along with 1.5 Meter SS pole with foundation. (Qty - 13 Nos)
    367Multi-Technology Smart Card (1K) (Qty - 1500 Nos)
    368Access Control Server with server redundancy (Qty - 02 Nos)
    3696 port Industrial grade layer 2Managed Ethernet Switch WITH 10/100/1000 Mbps with 6 Nos. RJ copper port and 2 Nos. SFP SM transceivers (1000 base LX) with surge protection (Qty - 14 Nos)
    37016 port Industrial grade layer 2Managed Ethernet Switch WITH 10/100/1000 Mbps with 16 Nos. RJ copper port and 2 Nos. SFP SM transceivers (1000 base LX)with surge protection (Qty - 02 Nos)
    371Half Height tripod (3 x 180 degree) with necessary civil foundation (Qty - 04 Nos)
    372Area scan Under Vehicle Surveillance System with necessary civil foundation (Qty - 01 No)
    373Automatic Rising Bollards (Minimum 4 cylindrical arms) with necessary civil foundation (Qty - 02 Nos)
    374X-Ray Baggage Scanner (Qty - 01 No)
    375Door Frame Metal Detector (Qty - 01 No)
    376Boom barrier with 5 Meter length (Qty - 02 Nos)
    377Boom barrier with 9 Meter length (Qty - 02 Nos)
    378Explosive Trace Detector. (Qty - 01 No)
    379Breath Analyzer. (Qty - 01 No)
    380All types of ACS Cables including network, Power and Fiber optic cables. (Qty - 10,120 Mtrs)
    381Sub-Total for S.No. 2.12 -CATEGORY - A-12 : SECURITY SYSTEMS
    382A-13 : PIPING WORKS – MANUAL VALVES
    383These cover the following MANUAL VALVES & STRAINERS that will be sourced Locally and supplied by PACKAGE-3 (MECHANICAL) VENDOR. Details of work scope shall be as per RFQ Doc. (Category-A-13).
    384Ball Valves (Qty - 5829 Nos)
    385Check Valves (Qty - 1833 Nos)
    386Gate Valves (Qty - 275 Nos)
    387Globe Valves (Qty - 23 Nos)
    388Butterfly Valves (Qty - 362 Nos)
    389Piston Valves (Qty - 236 Nos)
    390Strainers (Qty - 224 Nos)
    391Steam Traps (Qty - 15 Nos)
    392Flexible Hoses (Qty - 207 Nos)
    393Truck / Drum unloading hoses with couplers (dry disconnect / flanged end) (Qty - 128 Nos)
    394Male adaptor for dry disconnect couplings (Qty - 27 Nos)
    395Sub-Total for S.No. 2.13 -CATEGORY - A-13 : PIPING WORKS – MANUAL VALVES
    396A-14 : MATERIAL HANDLING FACILITIES
    397These cover the following MATERIAL HANDLING FACILITIES, that will be sourced Locally and supplied by PACKAGE-3 (MECHANICAL) VENDOR. Details of work scope shall be as per RFQ Doc. (Category-A-14).
    398DOCK LEVELLERS(Qty - 25 Nos)
    399GOODS LIFT (CAPACITY: 2 MT) (Qty - 03 Nos)
    400FORK LIFT TRUCKS (BATTERY POWERED)(Qty - 06 Nos)
    401FORK LIFT TRUCKS (DIESEL POWERED)(Qty - 04 Nos)
    402PALLET TRUCKS (BATTERY POWERED)(Qty - 06 Nos)
    403TRACK-N-TRACE SYSTEM
    404TRACK-N-TRACE SYSTEM FOR Raw Material Warehouse (Qty - 01 Set)
    405TRACK-N-TRACE SYSTEM FOR Packaging Material Warehouse (Qty - 01 Set)
    406TRACK-N-TRACE SYSTEM FOR Finished Product Warehouse (Qty - 01 Set)
    407MHE FOR LOADING /UNLOADING OF TRUCK (TELESCOPIC CONVEYOR OR ROUGH TOP BELT CONVEYOR) – FOR RM WAREHOUSE (Qty - 01 Set)
    408MHE FOR LOADING /UNLOADING OF TRUCK (TELESCOPIC CONVEYOR OR ROUGH TOP BELT CONVEYOR) – FOR PM WAREHOUSE (Qty - 01 Set)
    409MHE FOR LOADING /UNLOADING OF TRUCK (TELESCOPIC CONVEYOR OR ROUGH TOP BELT CONVEYOR) – FOR FP WAREHOUSE (Qty - 01 Set)
    410EMPTY DRUM TRANSFER SYSTEM (Qty - 01 Set)
    411STEEL PALLETS (Qty - 8,650 Nos)
    412Sub-Total for S.No. 2.14 -CATEGORY - A-14 : MATERIAL HANDLING FACILITIES
    413Total for S.No. 2.0 -CATEGORY - A : TPI SERVICES FOR SHOP FABRICATED EQUIPMENT, SKIDS OR SYSTEMS – ONSHORE (IN INDIA)
    414CATEGORY - B: TPI SERVICES FOR SHOP FABRICATED EQUIPMENT, SKIDS OR SYSTEMS – OFF-SHORE
    415Providing services for Third Party Inspection (TPI) including liaisoning & obtaining quality assurance plan (QAP), requisite documents, carrying out inspection at vendor shop / factory, submission of report. The TPI services to be performed on Mandays basis for Off-shore (Overseas) sourced fabricated equipments / Skids / Systems such as Core Process Equipments for Lubes & Grease manufacturing, Diesel Exhaust Fluid, Bulk Instruments & Valves, Automation and Control System Hardware & Software, Core Filling Lines (Small can & High Speed Drum Filling Line), Automatic Storage & Retrieval System based Warehousing system, etc., The rate is inclusive of Local conveyance, Lodging and Boarding, allied expenses and incidental charges, etc., The estimated rates are bi-furcated for cost towards visit charges per person & Mandays inspection charges. The modality of handling visit charges and inspection charges are given below: (a) The visit charges shall be paid for undertaking the visit by TPI agency personnel from any place in India to any place overseas as detailed in respective item of this BoQ. (b) The Vist charges are inclusive of to & fro travel time and the travel & allied incidental time shall not be accounted for payment under Mandays for inspection. The payment for Mandays inspection shall be released by IOCL as perrespective item of BoQ for actual Mandays deployed for carrying out inspection at vendor"s workshop / factory.
    416(c) The visit charges is not applicable in case of undertaking visit by personnel of TPI agency / local office at abroad (as defined subsequently) from any other place outside India to overseas place of inspection, and hence IOCL shall not pay visit charges for this eventuality. In other words, cost towards inspection charge becomes inclusive of vist charges undertaken from any place outside india to overseas place of inspection. For the inspection carriedout by TPI agency through their local office abroad shall be paid on Manday basis through respective item of BoQ as detailed below. (d) The branch office / sister concern / parent company / subsidiary / companies under common umbrella are allowed for undertaking overseas inspection through their local office abroad. In case the inspection has been carried out by said branch office / sister concern / parent company / subsidiary / companies under common umbrella, the inspection report shall be vetted by bidding company and to be submitted to IOCL by bidding company. The onus of inspection lies with bidding company and the terms & conditions of the tender shall be revoked against the bidding company for any breach of contract or non-conformity.
    417B-1 : SHOP FABRICATED – CORE PROCESS EQUIPMENTS - FOR LUBES
    418These cover the shop fabricated CORE PROCESS EQUIPMENTS that will be fabricated & supplied by PROCESS VENDORS in SKID form and these will be primarily fabricated by CPE Vendors in their own Shop or sourced from other Sub-contracted OFFSHORE vendors. Details of work scope shall be as per RFQ Doc. (Category-B-1).
    419Simultaneous Metered Batch Blender for Lubes with Booster pumps – Skid mounted;(Qty - 02 Nos)
    420Auto Batch Blenders (20MT) with Dosing Tanks & Recirculation Transfer pumps(Qty - 02 Nos)
    421Auto Batch Blender (15MT) with Sulphur dissolution vessel, Powder silo with charging arrangement & Recirculation Transfer pumps(Qty - 01 No)
    422Exhaust Scrubber arrangement for Sulphur dissolution facility(Qty - 01 No)
    423Auto Batch Blender (30MT) & Recirculation Transfer pump(Qty - 01 Set)
    424Auto Batch Pilot Blender (2MT) & Recirculation Transfer pump(Qty - 01 No)
    425Drum Decanting Systems (Skid mounted)(Qty - 03 Nos)
    426Drum Heating Ovens (Cap- 32 Drums)(Qty - 02 Nos)
    427Blended Product Transfer Matrix Manifold (2x5 configuration)(Qty - 01 No)
    428Finished Product Transfer Matrix Manifold (22 x 16 configuration)(Qty - 01 No)
    429Air Mixing Systems for FP Tanks – 33nos for FP Tanks(Qty - 33 Nos)
    430Air Mixing Systems for BO & Extract tanks;(Qty - 09 Nos)
    431Skid for Dye dissolution & Dosing system – with 5nos Dye mixing & dosing tanks;(Qty - 01 Lot)
    432VII Dissolution Kettle with Bottom Entry Disintegrator, Transfer pump, In-line Mixer and Product filter,Polymer Charging provision etc.(Qty - 01 Lot)
    433In-Line Blending Skid for Bituminous Lubes with Booster pump(Qty - 01 Lot)
    434Skid for Additive Premix Vessel for Bituminous Lubes with Pump(Qty - 01 Lot)
    435In-Line Blending skid for Rubber Extender Oils with Booster pump(Qty - 01 Lot)
    436Skid for Additive Premix Vessel for REX with Pump(Qty - 01 Lot)
    437Air Mixing Systems for REX Finishing Tanks;(Qty - 06 Nos)
    438Piggable Matrix manifold for REX finished product Transfer ( 2 x 2)(Qty - 01 No)
    439Simultaneous Batch Blender for BN Extract Oil(Qty - 01 Lot)
    440Skid for Additive Premix Vessel for BN Extract with Pump(Qty - 01 Lot)
    441Piggable Matrix manifold for BN Extract finished product Transfer ( 2 x 3) (Qty - 01 No)
    442Sub-Total for S.No. 3.01 -CATEGORY - B-1 : SHOP FABRICATED – CORE PROCESS EQUIPMENTS – FOR LUBES
    443B-2 : CORE PROCESS EQUIPMENTS – FOR GREASE (OFF-SHORE)
    444These cover the shop fabricated CORE PROCESS EQUIPMENTS that will be supplied by PROCESS VENDORS and these will be primarily sourced from other Sub-contracted OFFSHORE vendors. Details of work scope shall be as per RFQ Doc. (Category-B-2).
    445Grease Contactors (Qty - 02 Nos)
    446Grease Finishing Vessels (Qty - 06 Nos)
    447Grease Processing Kettles -12 MT (Qty - 03 Nos)
    448Grease Processing Kettle – 10MT for Clay Grease (Qty - 01 No)
    449Grease Autoclaves (PU & CaS) (Qty - 02 Nos)
    450Grease Autoclave for FG Grease (Qty - 01 No)
    451Grease Finishing Vessel for FG Grease (Qty - 01 No)
    452Grease Holding Tanks (Qty - 05 Nos)
    453Grease Homogenizers (Qty - 12 Nos)
    454Grease Colloid Mills (Qty - 02 Nos)
    455Grease Colloid Mill for FG Grease (Qty - 01 No)
    456In-line Vacuum Deaerators (Qty - 08 Nos)
    457Grease Filtration units (Qty - 07 Nos)
    458Sub-Total for S.No. 3.02 -CATEGORY - B-2 : CORE PROCESS EQUIPMENTS – FOR GREASE (OFF-SHORE)
    459B-3 : CORE PROCESS EQUIPMENTS – BULK INSTRUMENTS SUPPLY (OFF-SHORE)
    460These cover the supply of INSTRUMENTS that are part of CPE scope, which will be supplied by PROCESS VENDORS and these will be primarily sourced from Sub-contracted OFFSHORE vendors. Details of work scope shall be as per RFQ Doc. (Category-B-3).
    461B-3.1 : INSTRUMENTS & VALVES
    462ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)
    46325 NB (Medium temperature service) (Qty - 331 Nos)
    46425 NB (High temperature service) (Qty - 01 No)
    46540 NB (Medium temperature service) (Qty - 134 Nos)
    46650 NB (Medium temperature service) (Qty - 200 Nos)
    46750 NB (High temperature service) (Qty - 30 Nos)
    46880 NB (Medium temperature service) (Qty - 462 Nos)
    46980 NB (High temperature service) (Qty - 233 Nos)
    470100 NB (Medium temperature service) (Qty - 396 Nos)
    471100 NB (High temperature service) (Qty - 184 Nos)
    472150 NB (Medium temperature service) (Qty - 99 Nos)
    473Flush Bottom ball valve- Solenoid operated
    47450 NB (Qty - 01 No)
    47580 NB (Qty - 18 Nos)
    476150 NB (Qty - 14 Nos)
    4773 Way ON-Off valve ( 1 no. inlet & 2 nos. outlet - 1 at a time only)
    47850 NB (Qty - 04 Nos)
    47980 NB (Qty - 38 Nos)
    480100 NB(Qty - 68 Nos)
    481ON-OFF Valve -Solenoid operated single/double acting actuator (MOC - SS)
    48225 NB (Qty - 22 Nos)
    48340 NB (Qty - 16 Nos)
    48450 NB (Qty - 48 Nos)
    48580 NB (Qty - 72 Nos)
    486100 NB (Qty - 07 Nos)
    487ON-OFF valve with fail retain last position in the case signal/power failure,
    48825 NB (Qty - 04 Nos)
    489100 NB (Qty - 03 Nos)
    490150 NB (Qty - 44 Nos)
    491Supply of Motor operated ON-OFF valve (Electrical motor operated actuator)
    492200 NB (Qty - 17 Nos)
    493Supply of Pressure Control Valve- Modulating type
    49415 NB (for line size 25 NB) (Qty - 14 Nos)
    49525 NB(for line size 40 NB) (Qty - 01 No)
    49640 NB (for line size 50 NB) (Qty - 07 Nos)
    49750 NB (for line size 80 NB) (Qty - 67 Nos)
    49880 NB (for line size 100 NB) (Qty - 31 Nos)
    499Temperature Control Valve - Modulating type
    50025 NB (for line size 50 NB) (Qty - 03 Nos)
    50150 NB (for line size 80 NB) (Qty - 08 Nos)
    502Flow Control valve - Modulating type
    50315 NB (for line size 25 NB) (Qty - 09 Nos)
    50425 NB (for line size 40 NB) (Qty - 11 Nos)
    50540 NB (for line size 50 NB) (Qty - 03 Nos)
    50650 NB (for line size 80 NB) (Qty - 23 Nos)
    50780 NB (for line size 100 NB) (Qty - 02 Nos)
    508Self Regulating Pressure control valve
    50915 NB(for line size 25 NB) (Qty - 01 No)
    51025 NB(for line size 40 NB) (Qty - 01 No)
    51140 NB(for line size 50 NB) (Qty - 01 No)
    51250 NB(for line size 80 NB) (Qty - 04 Nos)
    51380 NB(for line size 100 NB) (Qty - 32 Nos)
    514100 NB(for line size 100 NB) (Qty - 01 No)
    515150 NB(for line size 200 NB) (Qty - 13 Nos)
    516Air Filter Regulator
    51725 NB for air headers inlet (Qty - 376 Nos)
    51825 NB (Qty - 134 Nos)
    51940 NB (Qty - 01 No)
    520Metering skid for loading of tankers (MOC - CS) (Qty - 14 Nos)
    521Metering skid for loading of tankers (MOC - SS) (Qty - 08 Nos)
    522Flow control Valve in CS contact parts(Qty - 14 Nos)
    523Flow control Valve, in SS contact parts (Qty - 09 Nos)
    524Loading armof size 80 mm NBwith all contact parts inSS(Qty - 22 Nos)
    525ROSOV"s
    526100 NB(Qty - 22 Nos)
    527150 NB(Qty - 36 Nos)
    52850 NB ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)(Qty - 04 Nos)
    52980 NB ON-OFF Valve ( Solenoid Operated Single / Double acting actuator)(Qty - 35 Nos)
    530Review of Manufacturer"s Test Certificates and acceptance against of materials against the same (W/O FAT); (Qty - 65 Nos)
    531Sub-Total for S.No. 3.03 -CATEGORY - B-3 : CORE PROCESS EQUIPMENTS – BULK INSTRUMENTS SUPPLY (OFF-SHORE)
    532B-4 : CORE PROCESS EQUIPMENTS – CONTROL SYSTEM SUPPLY (OFF-SHORE)
    533These cover the supply of CONTROL SYSTEM HARDWARE & SOFTWARE that are part of CPE scope, which will be supplied by PROCESS VENDORS from their Overseas facility.Details of work scope shall be as per RFQ Doc. (Category-B-4).
    534Control System hardware as per following
    535Remote IO Panel(Qty - 25 Nos)
    536DCS Control Panel(Qty - 01 No)
    537Servers(Qty - 02 Nos)
    538Operator workstations(Qty - 26 Nos)
    539Engineering workstations(Qty - 02 Nos)
    540Control System Softwares(Qty - 01 Lot)
    541Sub-Total for S.No. 3.04 -CATEGORY - B-4 : CORE PROCESS EQUIPMENTS – CONTROL SYSTEM SUPPLY (OFF-SHORE)
    542B-5 : PROCESS SKIDS FOR DEF
    543These cover the shop fabricated PROCESS SKIDS that will be fabricated & supplied by Licensed Process vendors for DEF SKIDS and these will be primarily sourced by Mechanical Pkg vendor from other Sub-contracted OFFSHORE vendors. Details of work scope shall be as per RFQ Doc. (Category-B-5).
    544DEF plant skids (SS Contact parts) (Qty - 02 Nos)
    545Sub-Total for S.No. 3.05 -CATEGORY - B-5 : PROCESS SKIDS FOR DEF
    546B-6 : CORE FILLING LINES – IMPORTED (OFF-SHORE)
    547These cover the supply of imported CORE FILLING LINES that are part of MECHANICAL scope. Details of work scope shall be as per RFQ Doc. (Category-B-6).
    548Medium speed, Small Can filling line for Lubes – suitable for 0.25L to 1.2L cans, complete with Unscrambler, Labeller, Lowerator, Infeed conveyor, Weighmetric filler & capper, Induction Heat Sealer, Laser jet printer, Case Packer, Carton Sealer & coder, Palletizer;(Qty - 01 No)
    549High speed drum filling line for Lubes – suitable for 200L/210L, Metal /HDPE drums, complete with Debunging tools, Fillers, Bunging & Sealing tools, On-line Drum labellers, common Palletizer – shared by 2 lines; (Qty - 02 Nos)
    550Sub-Total for S.No. 3.06 -CATEGORY - B-6 : CORE PROCESS LINES – IMPORTED (OFF-SHORE)
    551B-7 : AS/RS based WAREHOUSING SYSTEMS
    552These cover the supply of imported ASRS that are part of MECHANICAL scope. Details of work scope shall be as per RFQ Doc. (Category-B-7).
    553RAW MATERIAL WAREHOUSE – AS/RS SYSTEM (Pallet Quantity: 2500 numbers)(Qty - 01 No)
    554PACKAGING MATERIAL WAREHOUSE – AS/RS SYSTEM (Pallet Quantity: 1500 numbers)(Qty - 01 No)
    555FINISHED PRODUCT WAREHOUSE – AS/RS SYSTEM (Pallet Quantity: 4500 numbers)(Qty - 01 No)
    556LOW-FLASH RAW MATERIAL WAREHOUSE RACK (Pallet Quantity: 150 numbers; Two (2) level, 24 SKUs) (Qty - 01 No)
    557WMS System Hardware for RM, PM, FP & Low-Flash RM Warehouse
    558SRM
    559Double Deep Stacker Crane(Qty - 12 Nos)
    560Euro (skid type pallet) Fork(Qty - 12 Nos)
    561Bottom rails(Qty - 12 Set)
    562Bus Bar(Qty - 12 Set)
    563Shock absorber (rail end) urethane rubber stopper(Qty - 12 Set)
    564Pendant Switch (Handy-Terminal)(Qty - 12 Set)
    565Operation Box for SRC (off-board ctrl)(Qty - 12 Set)
    566HP/OP end of aisle fence and interlocked man-door(Qty - 2 Set per aisle)
    567Loop STV
    568STV(Qty - 07 Nos)
    569STV Loop rail(Qty - 02 Set)
    570STV bus-bar(Qty - 02 Set)
    571Off board Operation box(Qty - 02 Set)
    572Guard fence and interlocked man-door(Qty - 02 Set)
    573In/Out Equipment
    574Dock/Production Area - Aisle Conveyors(Qty - 98 Set)
    575IN /OUT Conveyors (FG area)(Qty - 24 Set)
    576Weigh scale(Qty - 14 Nos)
    577Profile Check(Qty - 24 Nos)
    578Barcode Reader(Qty - 24 Nos)
    579Light towers(Qty - 01 Lot)
    580Guard post, guard pole, guard rail(Qty - 01 Lot)
    581IT Hardware
    582PC, Barcode printer, Label printer, etc(Qty - 01 Lot)
    583CTR
    584AGC (AS/RS Group Controller)(Qty - 01 Set)
    585SRC (SRM off-board controller)(Qty - 12 Nos)
    586STVC (STV off-board controller)(Qty - 02 Set)
    587PLC system for conveyor(Qty - 01 Set)
    588Field bus system for conveyor control(Qty - 01 Set)
    589MOS ( Visualization System)(Qty - 01 Set)
    590UPS for AGC & MOS & Controllers(Qty - 01 Set)
    591AGC & MOS software(Qty - 01 Set)
    592WMS System Software for RM, PM, FP & Low-Flash RM Warehouse
    593System checkout.(Qty - 01 Set)
    594Test of standard software.(Qty - 01 Set)
    595Check of sequences and interlocks configuration.(Qty - 01 Set)
    596Test of alarm system(Qty - 01 Set)
    597Check of the correct functionality of operators keyboard(Qty - 01 Set)
    598Check of other hardware parts.(Qty - 01 Set)
    599Demonstration of diagnostic equipment.(Qty - 01 Set)
    600Simulation of power failure and restarts.(Qty - 01 Set)
    601Sub-Total for S.No. 3.07 -CATEGORY - B-7 : AS/RS WAREHOUSING SYSTEMS
    602Total for S.No. 3.0 -CATEGORY - B: TPI SERVICES FOR SHOP FABRICATED EQUIPMENT, SKIDS OR SYSTEMS – OFF-SHORE
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail