|
| 1 | Analogue Compression Testing Machine | • Conforming to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1) . • Comprising of Loading Unit, Pumping Unit, Digital display.• Capacity -2000kN.• LC-1KNMax Vertical 370mm Clearance, • Max. Horizontal 340mm Clearance, PlatenSize• Dia 220 mm and Piston Dia 222.25 mm.• Piston Stroke 50 mm • Specimen Size:- 100mm & 150mm Cube, 100mm & Dia 150mm Dia Cylinder• The hydraulic pumping unit should be electrically operated. The loads should be measured on Bourdon tube type load gauges which should be calibrated against certified proving rings. The load gauges should be fitted with a maximum load pointer and pumping units should operate with two-speed design. In the Electrically Operated Pumping Units, load gauge should be fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge.• Suitable for operation on 220V, 50Hz, Single Phase, AC supply• Complete with all optional accessories• Commissioning and Training should be included in the offer. |
| 2 | Vee Bee Consistometer | • as per IS119 consisting of vibrating table 380mm long and 260mmwide. Resting upon elastic support at a height of about 305mm above the floor. Complete with start/stop switch, cord and plug. A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve. The swivel arm is also detachable from the vibratingtable. A graduated rod is fixed on a swivel arm and at its end a plastic disc is screwed. The divisions of scale on the rod record the slump of the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16mm dia and 600mm long, rounded at one end. |
| 3 | Curing Tank | • Temperature Range: – 50 C to 1000 C. The tank should accommodate150 mm / 70.6 mm cubes upto 36 / 72 cubes and fully insulated covered with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks with free circulation of water around each cube, pump, drain valve etc complete• Complete with all optional accessories |
| 4 | LosAngeles Abrasion Testing Machine | • Consisting of hollow cylinder mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum, catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30 – 33 rpm by an electric motor through a heavy duty reduction gear with a tray provided for sample collection etc complete.• Complete with all optional accessories |
| 5 | Cube Moulds | 1) Cube Mould (70.6 mm) With I.S.I Mark IS: 10080-19822) Cube Mould (150 mm) With I.S.I Mark, IS: 10086-19823) Cylinder Mould (150mm x 300 mm) with ISI mark4) Beam Mould (150mm x 150mm x 700 mm) with ISI mark5) Beam Mould (100mm x 100mm x 500 mm) with ISI mark |
| 6 | Steel Trays | • Size 60cm x 60cm- 28 guage |
| 7 | Slump Test Apparatus | • Confirming to IS: 7320-1974• Size:- 100 mm dia at the top, 200 mm dia at the bottom, and 300 mm high with two cleats and lifting handles.• A base plate with clamping arrangement for the slump cone and a swivel handle which also serves as the datum for measuring the slump.• A tamping rod 1.6 cm dia and 60 cm long with one end rounded and graduated from 0 to 15 cm in 0.5 cm spacing to measure the slump.• Complete with all optional accessories |
| 8 | Flakiness Index Test Gauge | • Conforming to IS – 2386 (Part I)• Made up of heavy gauge sheet steel• ISI Certification Marked |
| 9 | Elongation Index Test Gauge | • Conforming to IS – 2386 (Part I)• Made up of heavy gauge sheet steel• ISI Certification Marked |
| 10 | Rebound Hammer Test Apparatus | As per item |
| 11 | Digital Balance | • 5Kg, 10Kg, 20 Kg (Platform Type) capacity sensitivity 1gm.• Complete with all optional accessories |
| 12 | Vicat Apparatus, With Dashpot | • Conforming to IS: 5513-1976• Consisting of a frame with a vertically movable rod having a cap at the top.• Vicat mould in the form of frustum of a cone with internal diameter of 60 mm at the top, 70 mm at the bottom and a height of 40 mm.• Glass base plate for the mould.• Initial Setting Time Needle.• Final Setting Time Needle.• Consistency plunger.• Complete with all optional accessories |
| 13 | Laboratory Oven | • Heating elements made up of high grade (KanthaI) resistance wire.Heaters are fitted/wound along all the sides of the oven. Complete with two pilot lamps, plug pins.• Temperature Range : - 50º to 250º ±1º C• Air circulation fitted for proper air circulation.• Fitted with Digital temperature indicator cum controller.• Stainless Steel chambers.• Size -600 x 600 x 600 mm• No. of Trays-3• Rating-2.5kw• Complete with all optional accessories |
| 14 | Standard Sieve Set for Coarse Aggregate | • As per IS 460 1962• 30cm dia made of G.I frame with joint I.S meshes complete set with Lid and Pan.• Size:- 63mm, 50mm, 40mm, 31.5mm, 25mm, 20mm, 16mm, 12.5mm, 10mm, 6.3mm, 4.75mm• Complete with all optional accessories |
| 15 | Standard Set of Sieve for Fine Aggregate | • As per IS 460 1962 • Made of polished brass frame 20 cm dia, without joint and tightly fitting with each other 4.75mm to 75 micron IS sieve with lid and pan complete.• 4.75, 3.35, 2.8, 2.36, 3.00, 1.70, 1.40, 1.18, 1.00mm, 600 µm, 300 µm, 212 µm, 180 µm, 150 µm, 125 µm, 106 µm, 90 µm, 75 µm• Complete with all optional accessories |
| 16 | Spade | • Heavy duty fitted with hard wood handle |
| 17 | Trowel | • Conforming to IS:4031, IS 5515• Blade Length – 100 to 150 mm• Blade Length – 200 mm |
| 18 | Cement Mortar Cube Vibrator | • Conforming to IS:4031, IS 10080-1982• Mounted over Coiled Springs having a revolving eccentric shaft• Motorized• Suitable for operation on 220V, 50Hz, Single Phase AC Supply• Having supporting springs, springs for fitting mould, belt, belt guard and eccentric shaft with bearing• Having Time Switch one 7.06 cm ISI marked cube mould with hopper.• Complete with all optional accessories |
| 19 | Motorized Sieve Shaker | • Sturdy cast iron body, inclined sieve table which can accommodate a maximum of eight sieves of 300 mm dia• Adoptor for 200 mm dia sieves• Adjustable top clamping plate to hold the sieves• Table having a gyratory motion inz addition to up and down jolting action• Suitable for operating on 220 V, 50 Hz, single phase supply• Time switch adjustable from 0-60 minutes, • Complete with all optional accessories |
| 20 | Compaction Factor Test Apparatus | • Conforming to IS:7320 • Consisting oftwo conical hoppers with trap doors•Upper hopper-top internal dia = 25.4 cm, bottom internal dia = 12.7 cm and internal ht.=27.9 cm• Lower hopper- top internal dia = 22.9 cm, bottom internal dia = 12.7 cm and internal ht.=22.9cm• One cylindrical receiver - Internal dia=15.2cm, internal ht.30.5 cm •A welded steel stand for mounting the hoppers and the receiver co-axially at specified distances•Two trowels • One hand scoop • One standard tamping rod 16mm dia and 60 cm long with one end rounded • Complete with all optional accessories |
| 21 | Bulk Density Apparatus | • Conforming to IS:2386 (III),IS:1199• Cylindrical Metal Measures – 3 Litres, 15 Litres, 30 Litres• Tamping Rod 16 mm dia – 60 cm long• Complete with all optional accessories |
| 22 | Measuring Cylinders | • Made up of Glass• Graduated• Capacity – 50ml, 100ml, 250ml, 500ml, 1000ml and 2000ml |
| 23 | Thermometer | • Made up of Glass• Range - 0º to 50º , 0º to 110º |
| 24 | Vibrating Table | As per standard |
| 25 | Steel Trolley | As per standard |
| 26 | Rockwell Hardness | As per standard |
| 27 | Abrasive Cut Off Machine | As per standard |
| 28 | Polishing Machines | As per standard |
| 29 | Liquid Limit Apparatus | • Conforming to IS:2720 (V), IS:9259• Consisting of hard rubber base carrying sliding carriage assembly with brass cup hinged to it.• Casagrande Grooving Tool, Gauge Block• Manually operated Counter.• Complete with all optional accessories |
| 30 | Plastic Limit Apparatus | • Conforming to IS:2720 (V) – 1985• Consisting of Glass Plate, Brass Rod, Spatula, Moisture Tin and Porcelain Dish• Complete with all optional accessories |
| 31 | Pycnometer | • Conforming to IS:2386 (III) • Consisting of 1 Kg Glass Jar with Brass Cone, Locking Ring and Rubber Seal• Complete with all optional accessories |
| 32 | California Bearing Ration Test Apparatus(Motorised) | • Conforming to IS:2720 (XVI) – 1985• Electrically operated of motorised load frame, capacity 5000Kg, • Two Speed operation – 1.5, 1.25 mm / minute• Mould- Gun Metal 150 x 175 mm• Perforated base plate, Penetration piston, extension collar- Gun Metal 150 x 50 mm• Metal space disc, annular metal weight, slotted metal weight, proving ring, dial gauges, tripod stand, cutting collar, rammer 2.6 Kg weight with drop of 310 mm, rammer 4.89 Kg weight with drop of 450 mm etc complete as per IS 2720(XVI)• Complete with all optional accessories |
| 33 | Core Cutter | • Conforming to IS: 2720(XXIX)• Consisting of cylindrical core cutter 100 mm dia and 130 mm long, steel dolly 25 mm high, rammer with steel rod etc complete • Complete with all optional accessories |
| 34 | Sand Replacement Test Apparatus | • Conforming to IS: 2720(Part 28)• Consisting of Sand Pouring Cylinder fitted with conical funnel and shutter – capacity 3 ltr.• Cylindrical Calibration Cylinder 150 mm ID x 150 mm height.• Metal Tray – 300 x 300 x 40 mm with 10 cm central hole.• Complete with all optional accessories |
| 35 | Standard Proctor Test Apparatus | • Consisting of Compaction Mould 150 mm internal dia x 127.3 mm height• Volume 2250 ml• Collar, Base Plate all made of Mild Steel• Fixing Tie Rods of mild steel with nuts• Compaction Rammer – Heavy – Mild steel – 4.89 Kg Weight, 50 mm face dia, 450 mm controlled free vertical fall.• Complete with all optional accessories |
| 36 | Falling Head Permeability Test Apparatus | • For determination permeability studies of soil with overhead tank and mould As per IS2720part xvii complete with manual. |
| 37 | Unconfined Compression Test Apparatus | • Electrically cum hand operated as per IS 2720 part x consists of lead frame, proving ring of capacity 5 KN and 50KN and two dial gauges, three rate of travel 1.25mm, 1.5mm & 2.5mm. Set of plain platen and conical platen to test specimen size 38mm, 50mm, 75mm & 100mm. |
| 38 | Direct Shear test Apparatus | • Confirming to IS 2720.• Shear velocity adjustable between 0.00001 and 6 mm/minMaximum shear force: 5000 NVertical load ratio: 10:1Maximum vertical load: 500 NMaximum vertical load using the lever: 5500 NShear box and accessories made of brass.Power supply: 220-240 V 50 Hz, single phaseDimensions: 1100 x 1200 x 550 mmWeight: 150 • Including PC and Software |
| 39 | Vane Shear test Apparatus | • - Laboratory purpose as per IS 270 part xxx electrically operator rates of rotation 1/60 rpm simple phase complete with manual. |
| 40 | Hand operated Auger boring test apparatus and Sampling | As per standard |
| 41 | Universal testing Machine(UTM) | • Measuring Capacity (kN) 100, Displacement resolution (mm) 0.01, Load resolution (N) 2, Accuracy of Measurement +/- 1%, Max. Tensile Clearance at fully descended position (mm) 50-700, Max. Clearance for compression Test (mm) 0-800, Distance between columns (mm) 400-500 ,Power supply 3 phase, 50 Hz, AC Connectivity USB Port Required or Ethernet, Body Should be Powder Coated with good surface finish, Cross Head Should be made up of Steel, Software Required for connectivity with desktop & Report formatting Required in PDF/MWS, printing, data recording |
| 42 | Consolidation Apparatus | • For single sample complete with 2 no dial gauges and consolidation ring as per IS specifications |
| 43 | Bitumen Penetrometer | • Conforming to IS: 1448 (Part 60)• Consisting of Steel Base, adjustable feet for levelling.• Plunger weighing 47.5 gm and one each of 50 gm and 100 gm weight including cone and penetration unit.• Automatic Inbuilt Timer• Penetration Needle, Copper transfer dish, Aluminium Sample container – 2 sets• Complete with all optional accessories |
| 44 | Ring And Ball Apparatus | • Conforming to IS: 1205• Consisting of Magnetic Stirrer with heating facility and digital display of temperature.• Tapered Rings, Ball Centring Guide, Steel Balls 9.5 mm dia, Ring Roller and Electric Heater• Suitable for operation on 220 V, 50 Hz, Single Phase AC Supply• Complete with all optional accessories |
| 45 | Aggregate Crushing Value Apparatus | • Conforming to IS: 9376 – 1979• Consisting of Steel Cylinder 150 mm dia, Plunger and a steel base plate.• Surface coming in contact with aggregate should be case hardened.• Complete with all optional accessories |
| 46 | Aggregate Impact TestApparatus | • Conforming to IS: 9377 – 1979• Consisting of Heavy Circular Base with two vertical guides fitted with a cross bar at top• A hammer of 13.75 Kg mass which can be raised and allowed to fall freely through 380 + - 5 mm with locking arrangement• A cylindrical cup, metal measure and a tamping rod 10 mm dia x 230 mm long• Complete with all optional accessories |
| 47 | Ductility test of bitumen apparatus | • Material: Cast IronVoltage: 220-230 VoltAutomation Grade: Semi-Automatic |
| 48 | Centrifuge Extractor | As per standard |
| 49 | Spring Testing Machine | As per standard |
| 50 | Metric Chain | • Heavy duty with swivel handle, Brass Talleys, Brass Rings etc complete• Length- 20m and 30 m |
| 51 | Measuring Tape/Metallic Tape | • Steel Tape of Length 3m, 10 m, 20 m, 50 m, 100 m with least count 1 mm• PVC Tape 20 m, 50 m, 100 m |
| 52 | Optical square. | • Brass bodyPWD pattern, • Leather/wooden case. |
| 53 | Cross staff. | • Open type, having 4 vanes at right angles.• Leather/wooden case. • Pole (wooden/steel) with heavy duty iron shoe at the base. |
| 54 | Ranging Rods | • Steel Rods 10 ‘ height |
| 55 | Offset Rods | • Steel Rods 10 ‘ height |
| 56 | Arrows | • Made of 8mm dia steel•9” long with standard hook head. |
| 57 | Prismatic Compass with tripod stand | • Consists of a brass or aluminum circular box with a diameter of 100/125 millimeter. Aluminum circle consists of a needle graduated to 30 min. (0. 50) Graduations can be magnified by sliding the prism fitted with colored glasses having a sighting slit at the top. |
| 58 | Surveyor Compass with Tripod Stand | • Offering the best quality Survey Compass with Stand. This Survey Compass is made by high quality material and it has perfect finish. Survey Compass made of Gun / Non magnetic Metal in a Leather case with Teak wood tripod Stand. Size of compass 100 mm. Dia As per IS specification. |
| 59 | Dumpy Level | • IMAGE Erect•MAGNIFICATION 24x•LENGTH OF TELESCOPE 300 mm • OBJECTIVE APERTURE 40 mm • STADIA RADIO 02:40:00 AM • FIELD OF VIEW 1° 30’•RESOLUTION 0.01 cm at 100 mt • PLATE BUBBLE SIZE 12mm X 87.5 mm • SENSITIVITY 45°/2 mm CIRCLE DIA METER 75 mm(magnetic ) CIRCLE GRADUATION 1 div=1° |
| 60 | Levelling Staff | As per standard |
| 61 | Plane Table Survey Equipments | • complete with all standard accessories. Specification: • Plane Table Board: 600 x 750 x 16mmPlane table stand: Aluminium, heavy dutyPlane table head: 151 specification ball and socket type.Magnetic compass: 150mm brassSpirit level: 150mm brassAlidade : telescopic ( ISI standard)Pancake coils single layer: brassPlumb bob : brass• Canvas cover: Full |
| 62 | Electronic Theodolite (including all standard accessories) | • Along with all standard accessories, Tool kit with case, carrying case, Rain Cover and manual.• Telescopic Length : 149 mm• Magnification : 30 X• Resolving Power : 3\"• Min. Focus : 1.35m• Field of view : 1°30\"• Least Count : 1\"• Accuracy : 2\"• Compensating Range : ±3\"• Display : Both Side• Plate Level Sensitivity : 30\" / 2mm• Circular Level Sensitivity : 8\" / 2mm• Battery Backup: 36 Hours• Rechargeable Battery • Battery Charger • Battery Pack for 4AA batteries• Wooden Telescopic Tripod• Complete with all optional accessories |
| 63 | Total Station | • Along with all standard accessories (Power Cable, Lens Cap, Lens Hood, Tool pouch, Screwdriver, Lens brush, Adjusting pin x 2, Cleaning cloth, Operation manual, Laser caution sign-board, Carrying case & Carrying strap).• Magnification : 30 X• Least Count : 1\"• Accuracy : 5\"• Reflector less Range : 500 M• Distance Measuring Range with Single Prism (Under Good Conditions) : 5000 M• Distance Accuracy : ±(2mm + 2ppm x D) m.s.e.• Display : Single Side• Data Storage : Internal Memory & USB • Internal Memory : 10,000 Points• Plug-in memory device : USB Flash upto 8GB• Battery Backup: Approx.36 Hours.• Rechargeable Li-ION Battery • Battery Charger • Wooden Telescopic Tripod • Single Prism Assembly,consisting of Prism with Holder and Target Plate, Prism Pole with bubble , Prism Pole Tripod• Complete with all optional accessories |
| 64 | Tilting level. | • Internal focusing fitted with horizontal circle, bubble tube complete.• Fibre /leather box. Aluminium stand.• Complete with all optional accessories |
| 65 | Tangent Clinometer. | • With rack & Pinion arrangement, bubble & leveling screws. Complete in a leather sling case.• Complete with all optional accessories |
| 66 | Abney level | • Size: 125mm complete in a durable cover• Complete with all optional accessories |
| 67 | Wooden Pegs | • 4-5 cm,• length 40-60 cm |
| 68 | Wooden mallets | • 350G and 500G |
| 69 | Automatic level | • Specifications: Magnification 32x, Standard deviation per km (double run level)= 2.0mm Accessories: Stand: Aluminium (heavy duty)-1no Staff: Aluminium (4m folding)-1no |
| 70 | Dissolved Oxygen Meter | Range: 0.00 to 19.99PPMResolution: 0.01 PPMAccuracy: ± 1.5% FSTemperature RangeRange: 0.0 to + 100.0°CResolution: 0.1°CAccuracy: ± 0.2°C |
| 71 | Total Dissolved Solids Meter | Range 0 – 99.9 ppm, Resolution 0.1 ppm, accuracy + 2ppm, tds factor user adjustable 0.5 to 0.85, automatic shut off etc complete |
| 72 | Residual Chlorine Meter | Display Range:0-2.000, 0-20.00 PPM, Accuracy: ± 0.01 PPM Repeatability: ± 0.01 PPM Linearity: 0.1% of F.S.Power: 115/230 VAC, 50/60 Hz., 10 VA,Operating Conditions: -20-60°C, 0-95% R.H. non-condensing |
| 73 | Conductivity Meter | Conductivity range 6 auto–selected from 0 to 1999mS, Conductivity resolution 0.01µS to 1mS, Conductivity accuracy ±0.5% ±2 digits |
| 74 | Digital p H Meter | Graphic display with on-screen instructions50-set memory (pH, temp, date and time stamp)Automatic calibration and buffer recognitionIP67 waterproof housingUser-replaceable single- or double-junction electrodesDigital pH Range: 0.00 to 14.00 unitsTemperature Range: 32.0 to 212 °F (0 to 100 °C)pH Resolution: 0.01 unitsTemperature Resolution: 0.2 °F (0.1 °CpH Accuracy: ±1 unit within 10 °C of calibration, ±0.2 unit within 20 °CTemperature Accuracy: ±0.6 °F (±0.3 °C) |
| 75 | Flocculator (Jar test Apparatus) | As per standard |
| 76 | Water Meter | As per standard |
| 77 | Pipe fittings | As per standard |
| 78 | Dye for threading | As per standard |
| 79 | Simple Manometer | As per standard |
| 80 | Differential Manometer | As per standard |
| 81 | Meta Centric Height Apparatus | As per standard |
| 82 | Building Construction Models | • Dog Legged Stairs• Open Well Stair• Quarter Turn Stairs• Bifurcated Stairs• Geometrical Stairs• Lean To Roof• King Post Truss• Queen Post Truss• Steel Roof Truss• Roof showing Hip and Valley• Spread Footing• Column Footing• Pile Foundation• Grillage Foundation• Bricklayer’s Scaffolding• Raking Shore• Flying Shore• Centering of Arch• Carpentry Joints• Bricks, Closers, Bats• Two Room and Verandah• G+1 Building• Jack Arch Flooring• T Beam & Slab Reinforcement• Fully Paneled Door• Half Paneled & Half Glazed Door• Sash Door• Ledged & Braced Door• Flush Door• Louvred or Venetain Window•Double Hung Window•Sliding Window• Casement Window•Awning Window•Hopper Window• Bay Window |
| 83 | Water Supply & Waste Water EngineeringModels | • Slow Filter•Rapid Sand Filter•Pressure Filter•Safe Water Supply From a Pond•Safe Water Supply From a River•Sedimentation Tank•Flocculator•Trickling Filter•Indian Type Water Closet• European Water Closet•Septic Tank•Imhoff Tank•Automatic Flushing Tank•Canal / River Intake |
