|
| 1 | Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing-N- capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match the existing surface all as specified & directed. |
| 2 | M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock)with all casing capping fittings &accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB\"s or common earth dolly complete forfor light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed. |
| 3 | All as per item no 2.00 but one light point controlled by two 2-way switches 5/6 Amps |
| 4 | All as per item no 2.00 but socket outlet 3pin 5 amps independent board |
| 5 | All as per item No 2.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with2.5 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge |
| 6 | All as per item No 2.00here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge |
| 7 | M & L for Rewiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including inexistingsurface/ recessed steel/PVC conduit including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB\"s or common earth dolly complete for light point/ fan point/ exhaust fan point/ call bell point controlled by one switch 5/6 Amp one way completeincluding dismantling as required all as specified and directed. |
| 8 | All as per item no7.00 here-in-before but socket outlet 3pin 5 amps independent board |
| 9 | All as per item No 7.00here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge |
| 10 | S&F in repairsswitch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-chargeMake : Anchor Product Code No 50053 or equivalent of approved make |
| 11 | S&F in repairs switch piano flush button,single pole, two way, 6 amps complete.Make : Anchor Product Code No 50064 or equivalent of approved make |
| 12 | S&F in repairs bell push, flush type, 6 amps, 240 volts ISI marked all as specified and directed.Make : Anchor Product Code No 50075 or equivalent of approved make |
| 13 | S&F in repairs bell ding dong, AC single pole 220/240 volts white/ivory finish, surface type complete all as specified and directed.Make : Anchor Product Code No 8272 or equivalent of approved make |
| 14 | S&F in repairs switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with two fixing hole including suitable gang box complete all as directedincluding taking down old one. Make : Anchor Product Code No 4056/50483 or equivalent of approved make |
| 15 | S&F in repairs switch modular type 15/16 Ampscomplete all as directed including taking down old one. Make : Havells AHFSXXW161 or equivalent of make as specified. |
| 16 | S&F in repairs modularsocket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flushtype,complete all as directed including taking down old one.Make : Havells AHFKCXW253 or equivalent of make as specified. |
| 17 | S&F in repairsswitch piano modular type, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge Make : Havells AHFSXXW101 or equivalent of make as specified. |
| 18 | S&F in repairsWhite cover plate with frame 4 module type complete all as directed by Engineer-in-charge Make : Havells AHXPTOWV04 or equivalent of make as specified. |
| 19 | S&F in repairsWhite cover plate with frame 6 module type complete all as directed by Engineer-in-charge Make : Havells AHXPTOWV06 or equivalent of make as specified. |
| 20 | S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with two/four fixing hole including suitable gang box completeall as specified and directed Make : Havells AHETWFG202 or equivalent of make as specified. |
| 21 | S&F in repairsceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI markedcomplete all as specified and directedMake : Anchor Product Code No 39040 or equivalent of approved make |
| 22 | S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed.Make : Anchor Product Code No 39527 or equivalent of approved make |
| 23 | S&Fin repairs Single pole and neutral enclosure with a two pin and earthplug and socket complete with one single pole MCB 20 Amps ,230 volt complete all as directedincluding taking down old unsv one. (Make : L&T cat No DBMPS120SD orequivalent of approved make |
| 24 | S&F in repair Bed side lamp led 3W with adjustable neck make-Philips 919215850324 or other approved maked. |
| 25 | S&F in repairs sheet metal enclosure DB\"s 240 Volts, IP-43, suitable for mounting MCB\"s, SPN,2 way with 200 Amps rated copper bus bar Single door type complete and including taking down old DBwith MCB complete all as specified and as directed .Make : L&T cat or equivalent of approved make |
| 26 | S&F in repairs sheet metal enclosure DB\"s 240 Volts, IP-43, suitable for mounting MCB\"s, SPN,8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DBwith MCB complete all as specified and as directed.vells/ABB/Legrand)(Make : L&T cat No DBSPN008DD or equivalent of approved make) |
| 27 | S&Fin repairs sheet metal enclosure DB\"s 240 Volts, IP-43, suitable for mounting MCB\"s, SPN,4 way with 200 Amps rated copper bus bar double door type complete and including taking down old DBwith MCB complete all as specified and as directed.(Make : L&T cat No DBSPN004DD orequivalent of approved make) |
| 28 | S&Fin repairs sheet metal enclosure DB\"s 240 Volts, IP-43, suitable for mounting MCB\"s, SPN,12 way with 200 Amps rated copper bus bar double door type complete and including taking down old DBwith MCB complete all as specified and as directed.Make : L&T cat No DBSPN012DD or equivalent of approved make |
| 29 | S&F in repairs sheet metal enclosure for4 way Distribution Boards (DB’s), triple pole and neutral double door with IP-43 protection suitable for fixing MCB\"s/lsolators after and including taking down old DBwith MCB complete all as specified and as directed.(Make : L&T cat No DBTPE004DD or equivalent of approved make) |
| 30 | S&F in repairs MCB Triple pole & neutral 40 to 63 Amps, 415 Volts, 10 KA rapturing capacity,\"C\" Curve complete all as directed by Engineer-in-charge. Make : L&T cat No BB40400C to BB40630C or equivalent of approved make |
| 31 | S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity,\"C\" Curve complete all as directed by Engineer-in-charge.(Make : L&T cat No BB20400C to BB20630C or equivalent of approved make) |
| 32 | S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, \"C\" Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent of approved make) |
| 33 | S&F in repairs LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Havells Cat No LUMLINEPLUSBS18WLED865SPCSS or equivalent of approved make) |
| 34 | S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed . Make -Crompton LCL-10-CDLor equivalent of approved make) |
| 35 | S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed (Make : Havells Cat No PLUTOSURFACE4X1PLS34WLED857S or equivalent of approved make) |
| 36 | S&F in repairs round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directedMake -Crompton LCDEP-12-CDL.or equivalent of approved make) |
| 37 | S&F in repairs round/square shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directedMake -Crompton LCDEP-06-CDL.or equivalent of approved make) |
| 38 | Supply and fix integrated LED bulk head fittings of 10 watts, presure die cast housing acrylic diffuser and frame with IP 66 protection complete all as specified and as directed .Make Havells Cat Part No.HEXAFT10WLED857SSYMBOPC or equivalent of approved make |
| 39 | Supply and fix Metal and glass decorative wall lights 1x20Wcomplete all as specified & as directed.Make :Philips cat part no- 30762 Delite or equivalentmake as specified . |
| 40 | Supply and fix 18 w LED PLL Aluminium extrusion lamp warm white make-Havells LHLDEJNEUL8Z018or equivalentmake as specified . |
| 41 | S&Fin repairs decorative wall light made up of high grade engineering plastic material suitable for retofit LED bulb B22 Cap all as specified and as directed. (Make : Havells Cat No LHDL06160099 or equivalent make as specified. |
| 42 | M&L for submain wiring alongwith earth wire of size 2x6.0 Sqmm + 1x6 Sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor single core cable drawn in and incl PVC casing and caping of adequate size with all accessories as required as specified and as directed incl taking down old unserviceable submain wiring. (Note : Three runs of PVC wire with one run of PVC casing and caping will be measured and paid as one length.) |
| 43 | M&L for submain wiring alongwith earth wire of size 2x4.0 Sqmm + 1x4 Sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor single core cable drawn in and incl PVC casing and caping of adequate size with all accessories as required as specified and as directed incl taking down old unserviceable submain wiring. (Note : Three runs of PVC wire with one run of PVC casing and caping will be measured and paid as one length.) |
| 44 | Servicing of Exhaust fans of capacity 450/350/300/250mm including taking down from site at any height of floor by own arrangement of contractor, dismantling, cleaning, greasing/oilingof bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing and making the electrical connections complete all as directed . (Unserviceable parts other than specified in this item if any will be measured seperately). |
| 45 | Dismantling and Re-winding of exhaust fan motor 250-300mm sweep with super enameled copper winding wire of gauge 35SWG and weight not less than 250gmsincluding cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as specified and directed.(Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used. (ii)Motor shall be wound with machine only. (iii) Super enameled copper winding wire shall only be used.(iv) Copper winding weight shall not be less than old existing repaired fan. |
| 46 | All as per Srl item No 45 above but above 300mm and upto 450mm sweep and weight upto 500 gms complete all as specified and directed. |
| 47 | S&F in Replacement of old unserviceable capacitor AC 440 volts 2.5 mfd with copper wire terminal complete all as specified. Make:Havellsor equivalent make as specified. |
| 48 | S&F in Replacement of old unserviceable capacitor AC 440 volts 3.15 mfd with copper wire terminal complete all as specified. Make:Havellsor equivalent make as specified. |
| 49 | S&F in Replacement of old unserviceable capacitor AC 440 volts 4.0 mfd with copper wire terminal complete all as specified. Make:Havells or equivalent make as specified. |
| 50 | Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of super enamelled syntheticpaint to complete exhaust fan of sizeany size upto 450mm sweep at site incl, writing MES No or srl No & location on the ceiling fans as directed or required at site. |
| 51 | Taking down carefully geyser 35 to 50 ltrs capacity from wall after unscrewing nuts/boltsetc and again refixing in position after repair & replacement of spare-parts, descaling of rust and rubbish material from the inner tank testing complete after replacing the unserviceable spare parts all as specified and directed. Note:- 1.Spare parts/ items requiredwill be measured and paid separately under respective items. |
| 52 | All as per Srl Item No 51 above but capacity upto & including 25 ltr. |
| 53 | Supply & Fixin replacement ofthermostat ISI marked suitable for geysers upto 50 Ltrs Capacity any make or type as per site requirement. The adjustable range shall be 0 - 75 degree celsius complete all as specified and directed. |
| 54 | Supply & Fixin replacement ofheating element 2000 watt for 200 LPD solar water heater including suitable thermostat complete all as specified and directed. |
| 55 | Supply & Fixin replacement of multi function safety valve ISI marked suitable for geysers upto 50 ltrs capacity complete all as specified and directed. |
| 56 | Supply & Fixin replacement of old unserviceable 6 Hole syphon assembly made out of Stainless steelsuitable for 25/50 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed. |
| 57 | Supply & Fixin replacement of old unserviceable 9 Hole syphon assembly made out of Stainless steelsuitable for 25/50 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed. |
| 58 | Supply & Fixin replacement of heating element titanium coated ISI Marked of 1.5 KW rating round or triangular suitable for water heater storage as required at site including rubber washers complete all as specified and directed. |
| 59 | Supply & Fixin replacement of heating element titanium coated ISI Marked of 2.0 KW rating suitable for water heater storage as required at site including rubber washers complete all as specified and directed. |
| 60 | Supply & Fixin replacement of old unserviceablestainless steel Internal tank for vertically mounted geyser 25 Ltr capacity completeall as specified and directed. Notes: (i) The tank shall be tested at site and shall be able to withstand requisite pressure. |
| 61 | All as per Srl item No. 60 above but 50 Ltr capacity complete all as specified make and approved. |
| 62 | Supply & Fixin replacement of old unserviceable stainless steel braided flexible connection pipe with brass hexagonal adopters/nuts on both sides, 15mm bore (300mm long) complete ISImarked, suitable for cold & hot waterupto 0-80 degree celcius complete all as specified and directed make as approved. |
| 63 | Supply & Fixin replacement of old unserviceable stainless steel braided flexible connection pipe with brass hexagonal adopters/nuts on both sides, 15mm bore (450mm long) complete ISImarked, suitable for cold & hot waterupto 0-80 degree celcius complete all as specified and directed make as approved. |
| 64 | Supply and fixing carbon steel anchor bolts, nut and washer of size 12mm dia & 80mm length by grouting in wall complete for mounting Geyser of any size all as specified and directed |
| 65 | Supply and fix in replacement Exhaust fan louver round or rectangular shaped made of MS steel sheet for exhaust fan of size 250mm to 300mm sweep and fixing on wall by means of suitable size of screws incl taking down old unsv louvers complete all as specified and directed. |
| 66 | Supply and fix in replacement Exhaust fan mosquito net guard using Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wirestaples with iron frame fixed on wall means of suitable size of screws complete all as specified and directed. |
| 67 | M & L for earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe \"light grade\", watering pipe 20 mm dia GI \"light grade\", GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed . |
