Construction Of Lis For Village Dhang Upperli From Tubewell In Tehsil Nalagarh, District Solan Hp Sh Laying Rising Main Of Various Dia With Ms Flanges, Supply And Erection Of Pumping Machinery And Construction Of Mdt Construction Of Pump House Cum At La
Tender Value
12.16 Lakhs
Estimated cost
Bid Submission
23 Sep 2021
0 days left
EMD
24350
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nalagarh → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Lis For Village Dhang Upperli From Tubewell In Tehsil Nalagarh, District Solan Hp Sh Laying Rising Main Of Various Dia With Ms Flanges, Supply And Erection Of Pumping Machinery And Construction Of Mdt Construction Of Pump House Cum At Laying Rising Main Of Various Dia With Ms Flanges, Supply And Erection Of Pumping Machinery And Construction Of Mdt Construction Of Pump House Cum Atrendant Quarter And Erectrification Of Pump House
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches upto all depths in all classification of earth work such as pick work,jumper work, saturated soil including bailing of pumping out water,blasting soft/hard rock where blasting is prohibited.In alllifts including trimming and dressing of sides,levelling of beds to correctgrade i/c shoring,strutting,planking timbering and dewatering wherever required,stacking theusable andun-useable material / soilseparately and after laying, jointing of pipes returning the useable soil in trenches in trenches in 15 cm (fifteen centimeters) layers including consolidating of each of each deposited layer by ramming and watering and disposing of all surplus excavated soil un useable materials as directed within all leads & lifts including restoration of un-metalledsurfaces to its original condition and including cost of diversonfor traffic night signals, fixing caution boards, crossing over trenches for excess to houses, fencing etc.completein all respect with in all leads & lifts as per the direction of the Engineer-in-charge. |
| 2 | Excavation in drain and channels etc. earth work for pipes upto all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is probihited in all lifts including jungle clearence wherever required, trimming & dressing of sides, levelling of beds to correct grade including shoring/struting, planking , timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/ unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, right signals, fixing caution boards, crossing over trenches for acess to houses, fencing etc. complete in all respect with in all leads and lifts and as per direction of theEngineer-in-charge at site of work. |
| 3 | Providing and laying cement concrete 1:6:12(Icement:6sand:12 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work and cement in foundation and plinth including carriage of material in all leads & lifts. |
| 4 | Providing and laying cement concrete 1:4:8(Icement:4sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work and cement in foundation and plinth including carriage of material in all leads & lifts. |
| 5 | Ist class brick work using common burnt clay building bricks in foundation and Plinthin cement mortor 1:6 ( 1 cement:6 sand ) in all leads and lifts asper the direction of the Engineer-in-Charge. |
| 6 | Ist class brick work using common burnt clay building bricks in superstructure in cement mortor 1:6 ( 1 cement:6 sand ) in all leads and lifts asper the direction of the Engineer-in-Charge. |
| 7 | 2nd class brick work using common burnt clay building bricks infoundation and Plinthin cement mortor 1:4 ( 1 cement:4 sand ).in all leads and lifts asper the direction of the Engineer-in-Charge. |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering,struting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu,reinforced concrete and plain concrete and plain concrete work in :- |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like.upto 200 mm thickness including carriage of material in all leads & lifts. |
| 10 | Providing and laying cement concrete work with design mix M20 but not lesser than cement concrete 1:2.4(Icement:2sand:4graded stone aggregate 20 mm nominalsize)and curing complete excluding the cost of form work and cement and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, beam girderes bressumers andcantiliver upto floor two level including carriage of material in all leads & lifts. |
| 11 | Providing Tor steel reinforcement for RCC work i/c bending,binding and placing inpossition complete including bending wire upto floor all level including carriage of material in all leads & lifts |
| 12 | 15 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level including arrises, internal rounded angle, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:5 ( 1 cement : 5sand ) in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 13 | 15 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level including arrises, internal rounded angle, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:3 ( 1 cement : 3sand ) in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 14 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split end tails to each jamb including steel but things 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretreetment of the surface as directed by Engineer-in-Charge. |
| 15 | Profile-\"A\". |
| 16 | Profile-\"B\". |
| 17 | Providing and fixing 1mm thick M.S.sheet doorwith frame of40mmx40mmx6mm angle iron 3.15mm M.S. gusset plate at the junctions and corners including all necessary fittings, complete including applying a priming coat of red lead paint.using flat 30mm x6mm for diagonal braces and control cross/pieces including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 18 | Filling in plinth with sand under floors including watering, ramming,consolidating and dressing complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 19 | 40mm thick cement concrete flooring 1:2:4(1 cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cementincluding carriage of materials with in all leads and lifts. |
| 20 | White glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortor 1:3 (1cement : 3 sand )and jointed with cement slurry ). |
| 21 | Providing and fixing on wall face100mm dia. PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 22 | White washing with lime on undecorated wall surface ( two coats) to give an even shade including throughly brooming the surface to remove all dirt ,dust mortor drops and loose scale of lime wash and other foreign matter completein all respect as per the direction of the Engineer-in-Charge. |
| 23 | Providing plinth protection 50 mm thick in cement concrete 1: 3: 6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) including entire carriage of material and as per direction of theEngineer-in-Charge. |
| 24 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter with enamel paint other than whitecomplete in all respect as per the direction of the Engineer - in - Charge. |
| 25 | Providing and fixing aluminium tower bolts of following sizebarrel type anodized transport or dyed to required shade and colour with screws complete in all leads and lifts and as per the dirction of the Engineer- in - charge. 250x10mm |
| 26 | Providing and fixing MS fan clamps type 1 of 16 mm dia bar bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of roof as per standard design complete in respect including entire carriage of material and as per direction of theEngineer-in-Charge. |
| 27 | Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws plain grills in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 28 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valves and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level of 500 litres net capacity tank complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 29 | Providing and fixing vitreous China wash down water closet squatting pan(Indian type W.C. pan) size 580mm.(Earth work,bed concrete,foot rest and trap to be measured and paid for separately) Orissa Pattern complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 30 | Providing and fixing PTMT coloured/white high density polyethylene/poly propylene 10 litres capacity( Full flush)European standard control low level flushing cictern with fittings with a pair of brackets with fittings such as lead valve syphon,15mm nominal size PVC ball valve with polythene float, with push button,coupling for connections with inlet,outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( Overflow pipe to be measured and paid for separately) complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 31 | Providing and fixing of 110mm dia.high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 32 | Providing and fixing of 110mm dia. PVC \"P\" or \"S\" trap for water closet( Squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 33 | Providing and fixingbrass bib tap( Superior or heavy type) of 15mm dia complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 34 | Fixingto wall ceiling and floor galvanised mild steel tubes 15mm dia (Light grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including entire carriage of materials in all leads and lifts as per the direction of the Enginner-in-Charge. |
| 35 | Laying,jointing testing and commissioning at site in trenches following plain ended GMS pipes of following dia of Medium grade as under confirming to BIS 1239-(Part-I)-1990 or latest with upto date ammendments, capable of withstanding required test pressure as prescribed in BIS code in randum lengths of 5.5 to 6.5 mtrs.The pipes ends shall be bevelled suitable for butt weldincluding the cost of jointing with butt welding confirming to IS- 816-1969 or latest as applicable ( leak proof) in three layers at site of work with welding rods of standard make and all allied acessories whatever required for welding at site, tail pieces, tees & bends manufactured from parent pipes etc and cuttings of pipes wherever required etc. as per site requirement i/c carriage in all leads & lifts and as directed by Engineer-in-charge .( Earth work shallbe measured and paid for seperatly) |
| 36 | 125mm dia (Medium Grade). |
| 37 | Providing, welding andfixing M.S plate flanges of 125mm dia (Nominal bore) of following flange Table conforming to ISI specification No.6392-1971 or latest with upto date ammendments to GI pipe after every 100 jointsor as per site requirement including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specification as per prescribed in relevant IS Code i.e IS 816-1969 or latest as applicable with upto date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with upto date ammendments including packing sheet i.e asbestos fibre sheet minimum 3mm thick and painting with anticrossive paints complete in all leads,lifts and carriage of material at site and as directed by the Engineer-in-charge. |
| 38 | 125 mm. dia flange table-5 |
| 39 | Supply,errection,testing &commissioning of star rated enrgy efficient Submersible pumping set of KSB/Calama/ WPIL/ Crompton/BS/ SABAR / Oswal/Kirloskaror any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloyssuitable for handlingClear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve onpump side ensuring better life for shaft coupled to a submersible squirrel cage electricinduction motor(water proof type)of requiredHP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump byintermediate casing with double mechanical seal in oil chamber and greasepacked lubricated bearings and provided with stainless steel thrustbearing plate to with stand non vertical loads with minimumwear andtear. It should also be fitted with a device to take up expansion of water with the heating of motor. Thepump set shouldinclude water level guards, erection clamps , cable clips, depth gauge NRV & Sluice valves of approved class etc.The workshould be completed to the entire satisfactionof the Engineer-in – Charge.The HP are indicative,the design /drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender.The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories/ valves /piping work etc.should meet with the following requirements. (i) Sluice Valves/Reflux Valves to be provided on delivey line:- These shall be double flanged valvesof approved make & size of valves shall beone size higher than delivery size ofoffered pump or equal to dia of column pipe.The class of valves shall be cast stell ASA-300 .(iii) Piping work (Column Pipe & Delivery pipesto connect Column pipe with Rising main):- The column shall be capable to with stand total dynamic preesurte + surge pressuire Or 1.5 times the total dynamic pressure whichever is more & it shall have minimum wall thickness of 4.80 mm jointed with flanged joints at every three meters. It shall also include the cost of providing, laying, jointing of column pipe with rising main, testing & commissiuoningincluding all types of bends & other accessories etc.(iii) Power shunt Capactor:- Capacotors shall be of suitable KVAR so as to improve power factor to 0.95 or above. (iv) Pannel Board:-It shall be of suitable size & capable to accomodate all above electrical accessories i/c providing & fixing in position these accessories& interconnections with cable of appropriate size & specifications.(v) Startes:- Starters shall be of approved make & of suitable rating suitable of safe running and operation of given motor orpumping machinery It shall be mounted on panel board with magnetic type over load release & dashpot, time lag,under voltage release with initial oil filling if required. |
| 40 | Booster stage (T/Well to MDT) :- 1 sets for duty condition discharge of = 10.91 LPS with Total Head of = 222.20 mtr. The BHP is to be offered by the bidder &rate shall be filled in by the contractor per set. |
| 41 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVCcanduite and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. including carriage of all material within all leads and lifts.Group \"C\" |
| 42 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of material within all leads and lifts. |
| 43 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads and lifts. |
| 44 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials upto all leads and lifts. |
| 45 | Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5)HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials upto all leads and lifts. |
| 46 | Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch,connections, painting etc. as required including carriage of materials upto all leads and lifts. |
| 47 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, \"C\" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required \"A\" singlepole including carriage of material within all leads and lifts. |
| 48 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, \"C\" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as requiredincluding carriage of material within all leads and lifts.Double pole Category \"B\" 63 Amp. |
| 49 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset,neutral link, earth bar, din-bar, detachable gland plate,blanking plate, cable, identification labels interconnections,phosphatized and powder painted, including earthing etc. as required including carriage of material within all leads and lifts.Single door-8 way. |
| 50 | Providing,installing,testing and commissioning of 2x36 Watt CFL street light Category \"A\" including wiring with 1.5 sq.mm. PVC insulated copper conductor single core cableas required complete in all respect including carriage of material within all leads and lifts. |
| 51 | Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the rod of standard length (upto 30cm) with 1.5 Sqmm PVC insulated copper conductor single core cabe etc. as required sweep type. Category \"A\". |
| 52 | Providing,installing,testing and commissioning of 1x36 Watt FTL(T-8) shock proof slim (Category \"A\") including wiring with 1.5 sq.mm. PVC insulated copper conductor single core cableas required complete in all respect including carriage of material within all leads and lifts. |
AI Tender Summary
Tender Timeline
Sep 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender