Construction Of Health Sub-Centre Building With Delivery Room At Kahanpatt. Construction Of Ground Floor Including Water Supply And Sanitary Installation, Septic Tank And Rain Harvesting System
Tender Value
9.71 Lakhs
Estimated cost
Bid Submission
27 Sep 2021
0 days left
EMD
19400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Health Sub-Centre Building With Delivery Room At Kahanpatt. Construction Of Ground Floor Including Water Supply And Sanitary Installation, Septic Tank And Rain Harvesting System
BOQ
| Sl. No. | Item Description |
| 1 | Excavationinfoundation,trenchesetceterainearthworkinvolvingallclassificationofsoilsuchaspickwork,pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeters) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST andother taxes imposed by the government. |
| 2 | Excavation in drains and channels etc; in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. Rate inclusive royalty, malkana, toll tax, GST and any other taxes imposed by the government. |
| 3 | Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST and any other taxes imposed by the government. |
| 4 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation,. Footings bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 5 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 6 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 7 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 8 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits ofsuspended floors roofs, landingsand the like floor etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 9 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter)thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter)so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 10 | Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 11 | Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 12 | Providing and laying cement concrete work M20 mix design to obtain the minimum compressive strength 20N/mm2 ( twenty newton per square millileter) to obtain the minimum compressive strength not less than 330 kg/ cum with mechanically mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, base of colums, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 13 | Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) and minimum cement content not less than 320 kg/cubic meter mechanically mixed and vibrated includingcuring complete as per PWD specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work incoulmn, pillers posts and struts upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 14 | Providing and laying cement concrete workM-20 design mix to obtain the minimum compresive strength 20N/mm2 (20 newton per square millimeter) and minimum cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 15 | Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength of 20N/mm2( twenty newton per square millimetre) and minimum cement content not less than 320 kg/cubic metermechanically mixed and vibrated including curing complete as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work instair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 16 | Providing and laying cement concrete work ofgradeM-20 (M- Twenty)design mixto obtain the minimum compressive strength of 20N/mm square withcement contents not less than 320 kg (Three hundredtwenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete inreinforced concrete Chhajjas for all thickness in up tofloor twolevels up to all heights including finishing the exposed surface with cementmortar 1:3 (One cement isto Three sand) to give a smooth andeven surface including centering/ form work and curing complete but excluding thecost of reinforcement for reinforced concrete work . The rates are inclusive of cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.Rate is inclusive toll tax, GST and any other taxes imposed by the government. |
| 17 | Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 40mm (Forty millimetre)nominal size & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government. |
| 18 | Providing and laying tor steel of TISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 19 | Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government. |
| 20 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement isto six sand) including curing complete as per approved specification, drawing and design and curing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 21 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement isto five sand) including curing complete as per approved specification, drawing and design and curing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 22 | Providing and layingDamp Proof Course 38mm (Thirty eightmillimetre) thick withcement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate12.5mm (Twelve decimal five millimetres nominal size) mechanically mix including cost of form workand curing complete, as required at site as per H.P.P.W.D. specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The ratesincludingoctroi,royality, Malkana, toll tax, sales tax orother taxesimposed by the Government. |
| 23 | Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or equivalent using 1.70 kg (one decimal seven) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 24 | Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 25 | Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 26 | Stone filling tightly dry hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge includingcarriage of materials with in allleads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government. |
| 27 | Stone filling/brick bats aggregate in soak pitIncluding carriage of materials within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government. |
| 28 | Providing and fixing flush door shutters interior grade phenol bonded (Alpro or equivalent) ISI marked No.IS 22902/Factory made paneled door ISI marked No.IS-1003 construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and faco venco on both faces of shutters (40mm (Forty milimetre) thick including black enameled) M.S. butt hinges, including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 29 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85-G with a wire of dia 0.56(Zero decimal Fifty six milimetres) for doors and windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm (Forty milimetres) 2nd class deodar wood, within all leads and lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 30 | Providing and fixing cup board 19mm (Nineteen milimetre) thick water proof termite resistant commercial board including shelves and shutters, back side of the cup board/cabinet shall be finished with 8mm (eight milimetre) thick ply. All cut portion of the shutters and shelves from all side shall be finished with 6mm (Six milimetre) thick hard wood edging including nickel plated bright finished piano hinges, including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 31 | Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board in shelves/ box for cup board butt joints and fixing with nails and screws etc. complete as per architect drawing. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 32 | Providing and fixing 6mm (Six millimetre) thick ply wood linning with butt jointing and nails (Frame work and cover fillets to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 33 | Providing and fixing Ist class deodar wood12mm(Twelve milimetere) thick and 100mm (Hundred milimetere)wide pelmet with 25mm(Twenty five milimetere) diametere wooden curtain rod andbrackets including fixing witgh 25x3mm(Twenty five into three milimetere) M.S flat 10cm. Long and plugs etc. complete including carriage of materials within all leads, lifts and otherincidentals.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 34 | Providing andfixing M.S. plain grills of required pattern in steel frames of windows etc. with M.S. round headed bolts and nutsor by screws. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 35 | Providing and fixing 250X16mm (Two hundred fifty by Sixteen milimetre) size aluminium sliding doorbolt anodized transparent or dyed to required colour and shade withscrews and nutsetc. complete including carriage of materials within all leads and lifts of materials and other incidentals . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 36 | Providing and fixingcoloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 37 | i) 150x10mm (One hundred fifty into ten milimetre)size |
| 38 | ii) 100x10mm (One hundred into ten milimetre)size |
| 39 | Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 40 | (a) 125 mm (One hundred twenty five milimetre) |
| 41 | b)100mm ( Hundred milimetre) |
| 42 | Providing and fixing 150mm (One hundred fifty millimetre) oxidized M.S. double acting spring hinges with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 43 | Providing and fixing 150mm oxidized M.S. haps and stapples (safty type ) with necessary screws completeincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 44 | Providing and fixing oxidized M.S. hooks and eyes 150mm( One Hundred fiftymilimetre) with necessary screws completeincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 45 | Providing and fixing 150mm (One hundred fifty milimetre)M.S. double acting spring hinges with necessary screws etcetera complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. |
| 46 | Providing and laying 300x300x10 mm ( three hundred into three hundred into ten millimeters) thick antiskid ceramic tiles of premum quality of Nitco/ Kajaria/ Somany/ Well/ Johnson as per approved shade and manufacturein flooring over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 47 | Providing and laying600x600mm( six hundred into six hundred millimeter) acid resistance vetrified tiles of Restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade and design as per drawing and specificationin flooring, skirting and dado laid over12 mm ( twelve millimeters) thick cement mortar 1:3 (one cement: three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as reuired complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 48 | Providing Marble work ( table rubbed and Polished) in flooring 20mm (Twenty milimetre) thick base in cement mortor 1:3 (One Cement : Three Sand) including jointing with cement mortar 1:2 ( One White Cement : Two Marble dust) withan admixure of pigment to match the shade of the marble 20mm (Twenty milimetre) thick White makrana marblecomplete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 49 | White glazed tiles 6mm (Six milimetre) thick 20 x15cm (Twenty into Fifteen centimeter) in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 50 | Providing and fixing on wall face PVC (D-Plast rain water pipe) working pressure not less than 4.50 kg./sqm (Four point five zero Kilogram/ Square metre) including filling the joints with approved adhesive complete 100mm (One hundred milimetre) nominal size complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 51 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 52 | Plain bend 100mm(One hundred milimetre) dia. |
| 53 | Plain Shoe 100mm(One hundred milimetre) dia. |
| 54 | Providing and fixing(Single rebate) angle iron doors, windows, clearstory windows, frame manufactured from steel iron section of 40mmx40mmx4mm (forty milimetre into forty milimetre into four milimetre) thickness including hinges jamb, lock jamb, beeds and if required angle thrashold of mild steel M.S. flat 50x4mm (fifty into four milimetre) welded or rigidly fixed by mechanical means, lugs, with split and ails to each jamb including steel but hinges 2.5mm (two decimal fifty milimetre) thick with provision for locking arrangement and shock as specified and applying a coat of approved steel primer after pretreatment of the surface. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 55 | Providing and fixing M.S. channels for doors, windows, frames manufactured from M.S. section 75mmx40mmx 6mm (seventy five milimetre into forty milimetre into six milimetre) in combination as per drawing and design including hinges jamb, lock jamb beed and if required thrashold of mild steel M.S. flat 75x4mm (seventy five into four milimetre) thrashold of M.S. angles means lugs with split and tails to each jamb including iron butt hinges 2.5mm (two decimal five milimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surface. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 56 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lungs 10cm(Ten centimetres) long embedded in cement concrete block 15x10x10cm(Fifteen into ten into ten centimetres) size of 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetres nominal size) or with wooden/steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sesh putty of approved make complete. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 57 | Fixed steel windows :- |
| 58 | Side hung windows :- |
| 59 | Top hung windows :- |
| 60 | Providing and fixing M.S. fan clamp type-I of 16mm (Sixteen milimetre) dia M.S. bar bent to shape with hooked ends in roof laid including painting the exposed portion of loop, all as per standard design complete. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 61 | 6mm (Six milimetre) thick cement plaster to ceiling with cement mortar 1:3 (One Cement is to Three Sand).complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 62 | 15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand). complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 63 | Providing and fixing factory made double steel shutters, windows side hung core glazed and other wire gauge of standard rolled steel section jointing mitred and welded with manufactured to relevant ISI standard specification with 16mmx3.15mm (sixteen milimetre into three decimal fifteen milimetre) 20cm (twenty centimeter) long embedded in cement concrete blocks 15cmx10cmx10cm(fifteen centimeter into ten centimeter into ten centimeter) of size in cement concrete 1:3:6(one cement: three sand: six graded crushed stone aggregate 20mm (twenty milimetre) nominal size) with wooden plugs and screws with belts and huts as required including iron fittings, 3mm (three miliemtre) thick glass pans with special putty for glazed windows wire gauge of IS designation 85G with metal beeding complete. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 64 | 15mm (fifteen millimetre) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth with cement mortar 1:6 (one cement isto six sand) curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government. |
| 65 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 66 | Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 67 | Painting two coats (excluding priming on new concrete masonry/plaster surfaces with sythetic enamal paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with paint other than whitecomplete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 68 | White washing with lime on undecorated wall surfaces (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar droppings and other foreign matter complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 69 | White washing with lime on ceiling and/or sloping roofs two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 70 | Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 71 | Painting two coats (excluding priming costs) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 72 | Painting two coats (excluding priming costs)on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 73 | Providing under layer for plinth protection of 75mm(Seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm(Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 74 | Providing plinth protection 50mm(Fifty milimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm(Twenty milimetres) nominal size) including finishing the top surfaces of concrete smooth complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 75 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats_ to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 76 | Providing and fixing vitreous China wash down water closet (European type W.C. Pen) with integral P or S trap I/c jointing the trap with soil pipe in cement mortar 1:1 (one cement : 1 sand) (Seat and over to be measured and paid for separately) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 77 | Providing and fixing orrissa patternvitreous chinawaterclosetsquatting pan (Indian type W.C. pan ) size 580mm x440mm(five hundred eighty milimetre into four hundred forty mimilimetre) (earth work bed concrete, and trapto bemeasured and paid for seperately) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 78 | Providing and fixing 10 litres capacity P.V.C. low level flushing cistern with a pair of G.I or mild steel brackets complete with fitting such as lead volve less syphon, 15 mm nominal size brass bass valve with polythene float, CP brass handle unions and couplings for connections with inlet, outlet & overflow pipes, 40mm (Forty milimetre)dia. CP flush bend i/c cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 79 | Providing and fixing 100mm ( One hundred milimetre) sand cast iron P or S trap for water closet including jointing the trap with W.C. Pan in cement mortar 1:1 (One Cement: One Sand)complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 80 | Providing and fixing G.I inlet connection flush pipe with W.C pan complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 81 | Providing and fixing 610 x460 mm with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 82 | Providing and fixing white hollow plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 83 | Providing and fixing Flat Back 630x450 mm vitreous China wash basin with single hole for pillar tap with C I or M.S . Brackets painted white including cutting holes and making good the same but excluding fittings complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 84 | Providing and fixing 32mm (Thirty two milimetre) dia nominal size C./P.Brass waste for wash basin or sink complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 85 | Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 86 | Providing and fixing 32mm (Thirty two milimetre) diaC.P. Brass S. Trap for wash basin and sink complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 87 | Providing and fixing 32mm (Thirty two milimetre) diaPVC waste pipe for wash basin or sink complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 88 | Providing and fixing 600mmx 450mm (Five hundred fifty milimetre into four hundred fifty milimetre) bevelled edge Mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P Brass screws and washers complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 89 | Providing and fixing 600x20mm (Six hundred into twenty milimetre) C.P. brass towel rail complete with C.P. brass bracketsfixed to wooden plugs with C.P. Brass screws complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 90 | Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetre) glass shelfwith C.P. brass bracketsand guard rail complete, fixed to wooden plugs with C.P. Brass screws complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 91 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. Brass screws complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 92 | Providing and fixing15mm (Fifteen milimetre) diametres C.P. bib tap with capstan head complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 93 | Providing and Fixing 15mm dia C.P. Brass Pillar Tapwith Capstan head complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 94 | Providing and fixing15mm (Fifteen milimetre) dia cansealed C.P brass stop cock complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 95 | Providing and fixing brass full way valve with wheel 15mm ( fifteen milimetre)nominal bore complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 96 | Providing and fixing 500 litres net capacity tank PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 97 | Providing and fixing to wall ceilingand floorgalvanised mild steel tube ( medium grade ) to be fixed withclamps including making good the walls, ceiling and floor complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 98 | 15mm (Fifteen milimetre) nominal diametre |
| 99 | 20mm (Twenty milimetre) nominal diametre |
| 100 | Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separatelyincluding entire carriage of materials complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 101 | i)100mm (one hundred millimetre) nominal size |
| 102 | ii) 75mm (Seventy fivemillimeter) nominal size. |
| 103 | Providing and fixing sandcast iron / cast iron spun fitting and plain bend with oval access door, insertion rubber washer 2mm ( Two milimetre) thick bolts and nuts complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 104 | 100mm (One hundred milimetre) nominal size. |
| 105 | 75mm (Seventy five milimetre) nominal size. |
| 106 | Providing and layingin trenches galvanized mild steel tubes (medium grade tube) fittings (earth work in trenches to be measured and paid for separately) 20mm (Twenty milimetre) nominal bore complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 107 | Providng and fixing 100 mm(one hundred milimetre) nominal diametre cast iron cowl complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 108 | Providing and fixing sand cast iron / cast ironCollars complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 109 | i) 100mm (One hundred milimetre) nominal size |
| 110 | ii) 75mm (Seventy five milimetre) nominal size |
| 111 | Providinglead caulked joined to sand cast iron/ cast (spun) iron pipes and filtings including testing of joints100mm (One hundred milimetre) size diameter complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 112 | i) 100mm (One hundred milimetre) nominal size |
| 113 | ii) 75mm (Seventy five milimetre) nominal size |
| 114 | Constructing manhole withR.C.C top slab 1:2:4 (One cement : Two sand :Four graded stone aggregate 20 mm(Twenty milimetrenominal size) foundation concrete 1:4:8 (One cement : Four sand : eight graded stone aggregate 40mm (forty milimetre) nominal sizeinside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 ( One cement: Three sand) finished with a floatingcoat of neat cement and making channels in cementconcrete 1:2:4(One cement :Two sand :Four graded stone aggregate 20mm (Twenty milimetre)nominal size finished smooth complete including curring and Testing: inside 800mmx800mm and500mm(eighthundred milimetre into eighthundred milimetre andfive hundred milimetre) deep including C.Icover and frame (lightduty) single (seal pattern-1) 455mmx610mm internal diametre, total weight of cover and frame to be not lessthen 38Kg. ( weight of cover23 Kg. and weight of frame 15Kg.with 300mmthick walls of squared rubble masonry coursed with hard stones of approved quality in cementMortar1:3 ( One Cement : three Sand) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.ls. |
| 115 | Providing and fixing 75mm (Seventy five milimetre) nominal diametre cast iron floor traps of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goodthe walls and floors complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 116 | Providing and fixing 455mmx610mmLight duty Rectangular C.I. Hole with frame cover weight 38Kg. (tyhirty eight Kilogram) (Single Seal) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
| 117 | Providing and fixing 200mm (Two hundred milimetre) wide cast iron rungs with chequred or ribbed non slip surface including fixing in septic tank with 200mmx200mmx10mm (Two hundred milimetre into two hundred milimetre into ten milimetre) cement concrete 1:3:6 (One Cement: Three Sand: Six graded stone aggregate 20mm nominal size) complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. |
AI Tender Summary
Tender Timeline
Sep 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender