| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed |
| 2 | Supplying 60m Laterite stone matal at the road side for metal including conveying and stacking etc complete (50meter lead hand broken from boulders) Excluding Royalty |
| 3 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 4 | Spreading 80/40 mm metal for road work including sectioning etc complete |
| 5 | Spreading hard murum/soft murum gravel or kankar for side width complete |
| 6 | Compacting for 60mm laterite matel layer with power roller including necessary labour materials and artifical watering etc complete |
| 7 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) roadsurface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 Kilogram/Square Metre, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete. Metre (on exisitng bitumen surface) (VG-30 bulk bitumen rates areconsidered to arrive at rates) |
| 8 | Providing 20mm thick premix bitumious carpet including supplying all materials preparing and cleaning the base heating bitumen applying tack coat at specified tate,mixing hot bitumen and chips laying the carpet layer and compacting etc complete By Bulk asphalt (excluding Tack coat) cold mix with prior approval |
| 9 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing exisiting road surface heating and applying bitumen @ 0.98 kgsqm by mechanical means spreading chips and rolling by static roller having weight 8 to 10MT complete(VG-30bulk bitumen rates are considered to arrive at rates) |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-100 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M150 of trap/granite/ quartzite/gneiss metal for steps including steel centering, formwork, laying/ pumping,compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade |
| 13 | GST |
| 14 | Testing charges |
Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
