Construction Of Sports Building ( Ground Floor ) Construction Of Sports Building ( Ground Floor ) At Kamalpur, Dhalai Tripura During The Year 2021-22 ( 2Nd Call ) .
Tender Value
1.12 Crore
Estimated cost
Bid Submission
28 Sep 2021
0 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamalpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sports Building ( Ground Floor ) Construction Of Sports Building ( Ground Floor ) At Kamalpur, Dhalai Tripura During The Year 2021-22 ( 2Nd Call ) .
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work |
| 2 | Earth work in excavationby mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work Upto plinth level: |
| 6 | 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 7 | 1:3:6 ( 1 Cement: 2 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) |
| 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- |
| 10 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- In plinth and skirting courses, fillets, columns, pillars, posts and struts |
| 12 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas. |
| 14 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. |
| 16 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 18 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand)etc. complete, excluding the plastering of jambs, sills and soffits. 50 mm thick |
| 19 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 20 | Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 21 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply |
| 22 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 23 | Edges of slabs and breaks in floors and walls under 20cm wide |
| 24 | Weather shade, Chajjas, corbels etc., including edges. |
| 25 | First class brick work in foundation and plinth including cost of all materials as required complete. |
| 26 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 27 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 28 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak wood |
| 30 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25 to 40 mm thick. a) Local Teak Wood 16mm. Thick |
| 31 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position Local Teak Wood |
| 32 | Providing and fixing panelled /or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked bright finished /black enamelled M.S butt hinges with necessary screws excluding penelling and or glazing, which will bw paid for separately but including the wooden beading of 20 x 12 mm for fiing panelling and or glazed as per direction of Engineer-In-Charge. Local Teak wood 35mm thick Shutter |
| 33 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 34 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 35 | Providing and fixing IS: 1341 marked M.S. heavy weight Butt hinges with necessary screws etc. complete |
| 36 | 125 x 90 x 4 mm |
| 37 | 100 x 75 x 3.5 mm |
| 38 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 x 16 mm |
| 39 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. |
| 40 | 300 x 10 mm |
| 41 | 200 x 10 mm |
| 42 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm |
| 43 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper |
| 44 | Providing and fixingfan clamp type-Iof 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 45 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 46 | Providing and fixing 25 mm thick pre-polished colored concrete designer tiles making by strong vibratory compaction technology using 50% white cement and 50% ordinary cement of size 300mm x 300mm, laid in footpath & courtyard, on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete as per direction of the Engineer in charge. |
| 47 | Providing and fixing precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, landings, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. In light shade using white cement |
| 48 | 12 mm cement plaster of mix |
| 49 | In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 50 | In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 51 | 15 mm cement plaster on the rough side of single or half brick wall of mix: In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 52 | 6 mm cement plaster of mix: In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 53 | Neat cement punning. |
| 54 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 55 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 56 | Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 57 | With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 58 | with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel, galvanised iron/steel work. |
| 59 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
AI Tender Summary
Tender Timeline
Sep 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender