Public Works Department-PWD has published Construction Of H.E.O. Office Cum Residence At Heo Badhu Distt. Mandi, Hp. ( Sh-C / O Site Development, Building Portion , W.S And S.I., Rain Water Harvesting System And Soak Pit. Construction Of H.E.O. Office Cum Residence At Heo Badhu Distt. Mandi. Submission Date for this Tender is 20-09-2021. Water Harvesting Tenders in Gohar Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in soil in Hilly area by mechanical means in all kinds of soil such as a pick work , jumper work , blasting work both in soft and hard rock with chiesling / wedging out rock(where blasting is prohibited ) and other intermediate classification of soil including cutting and trimming of site slopes and disposal unserviceable material by mechnical transport and stacking the serviceable/ useful material on the road berms as per technical specification clause 1603.1, 1603.2 ormuttams shall be left at suitable place as directed by Engineer- in - Charge and shall be removed only after attaining the formation level and after final checking of Engineer-in- Charge. The work shall be executed in workman like manner and aboid any damaged to the private / Govt. property in the vicinity of work site , if any damage occurs to any property during the course of execution shall be the absolute responsibility of the contractor , which shall have to be duly compensated by him in all cases. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.The recovery of useful stones which is 37.26 cum shall be done from the contractor in each running bill on pro-rata basis. |
| 2 | Earth work in excavation for structure as per drawingand technical specification clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deletarious material and disposal up to a lead of 50 meter dressing of sides and bottom and back filling in trenches with excavated suitable materialordinary soil and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 3 | Providing and laying concrete for plain/reinforced concrete in open foundation complete as per drawing and technical specification Clause 802,803,1202 and 1203 as per entire satisfaction and direction of Engineer-in-Charge.cement concrete 1:6:12(One cement : six sand: twelve aggregate) |
| 4 | Stone masonry in cement mortar for sub structure complete as per drawing andtechnical specification clauses 702,704,1202 & 1203 Random rubble masonry in cement mortar 1:6. (one cement : six sand) curing complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 5 | Back filling behind abutment, wing wall and retaining wall complete as per drawing & technical specification clause 1204.3.8 with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge |
| 6 | Providing weep hole in brick masonry/ stone masonry / plain reinforced concrete abutment , wing wall, return wall with 100mm dia.(one hundred millimetre diametre) PVC pipe extending through the full width of the structures with slope of 1V:20H (one vertical isto twenty horizontal) towards drawing face complete as per drawing and technical specifications clauses 614,709,1204.3.7with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 7 | Excavation in foundation ,Trenches etc in earth work in all kind of soil such as pick work, jumper work, blasting work in soft and hard rock conglomrate rock or saturated soil includingchiselling / wedging out rocks (where blasting is prohibited) and pumping or bailing out watering/ dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in layers, when required into plinths,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 8 | Providing form work with steel plates 3.15mm (three point fifteen milimeter) thick welded with angle iron frames 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centering,shuttering,strutting and proping etc. with wooden battens and ballies heights of propin and centering below supporting floor to ceilling in all heights and removel of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 9 | (a) Foundation ,footings,basis of columns and the like and mass concrete. |
| 10 | (b)Flat surfaces such as soffits of suspended floors, roofs, landings and the like: Floors, etc. upto any thickness. |
| 11 | (c) Columns pillars, posts, and struts square, rectuangular or polygonal in plan |
| 12 | (d) Staircases with slopping or stepped soffits including risersand stringers excluding landing. |
| 13 | (e)Beams, cantilevers, girders and lintels.sides and soffits ofbeams,beam haunchingcantilivers,girders,bressumers andlintels upto any in depth. & upto all heights from floor. |
| 14 | Edges of slabs and breads in floors and walls. Under 20 cm wide. |
| 15 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. |
| 16 | Providing and laying cement concrete 1:6:12(1Cement:6Sand:12graded stone aggregate 40mm nominal size) in Foundatio & Plinth complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 17 | Providing and laying cement concrete 1:4:8 (one cement:foursand: eight graded stone aggregate 40mm (forty milimeter) nominal size) and curing complete excluding cost of form work in Foundation and plinth complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 18 | Providing and laying mechanicallymixedand bibarted cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 19 | Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel. |
| 20 | Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor two level. |
| 21 | Providingandlaying mechanicallymixedand bibartedcement conrete 1:1:5:3inpositionmachinebatched,machinemixedandmachine vibrated design mix.cement concrete ofM-20grade for reinforced cement concrete structural elements,excluding cost of centering /shuttering,finishing and reinforcementworkincluding curing & carriage ofmaterial in all leads and lifts. stone aggregate 20mm nominal size. |
| 22 | (a) Foundation ,footings,basis of columns and mass concrete. |
| 23 | (b) Suspended floor, roofs, landings, shelves and their supports, balconies,cantilevers Slabsin all heights & all floor level. |
| 24 | (c) Columnspillars posts and struts upto all floor levels. |
| 25 | Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level. |
| 26 | Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size)reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcementincluding carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 27 | Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to anylevel with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge |
| 28 | Brick work using 2ndclass common burnt clay building bricks infoundation and plinth and super structures upto floor two level. in cementmortar 1:6 (1 cement : 6 sand)2nd class bricks complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 29 | Half brick masonry using 2nd class commonburnt claybuildingbricks in superstructure above plinth level upto all floor level in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.upto floor two level complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 30 | Half brick masonry using Second Class Bricks common burnt clay building bricks in Cement Mortar 1:3 (one cement : three sand)curing complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 31 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 32 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement mortar 1:4 (1 cement : 4 sand) with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 33 | Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately). omplete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 34 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. 2nd class deodar wood.omplete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 35 | Providing and fixing 40mm thick 2stclass Deodarwood panelled, glazed or panelled and glazed shutters for doors, windowsandclearstoreywindows including bright finished/black enamelled ironbutthingeswithnecessary screws omplete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 36 | Providing and fixing wire guage shutters using galvanised MS wire guage of IS guage designation 85 G. with wire of dia 0.56mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material in all leads and lifts. (a) 40mm thick 1st class deodar wood. |
| 37 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 38 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 39 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 40 | Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 41 | Providing and fixingAluminium anodizedbrasssliding door bolts anodized to required of material in all leads and lifts. colour and shadewith bolts andnuts, screws etc. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. (a) 300 x 16mm. |
| 42 | Providing and fixing Aluminiumtower bolts( berrel type) anodized transparent or dyedto requiredshade and colour with screws etc. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 43 | (a) 250x10mm |
| 44 | (b) 150x10mm |
| 45 | Providing and fixing Aluminiumhandles anodized transparent ordyed to required colour or shade with necessary screws complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 46 | (a) 125mm |
| 47 | (b) 100 mm |
| 48 | Providing and fixing M.S. hooks and eyes. 150 mm complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 49 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required acomplete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 50 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 51 | Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 52 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 53 | Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. Shutters having width below 3.5 metres. complete with in all respect. including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 54 | Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 55 | Providing and fixing top cover for rolling shutters. Shutters having width bolow 3.5 metre. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 56 | Providing and fixing ball bearingfor rolling shutters. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 57 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 150mm dia pipes complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 58 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 150mm dia complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 59 | Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm thick sheet. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 60 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) |
| 61 | Cement concrete flooring 1:2:4 (one cement : twosand: four graded stone aggregate 20 mm (twenty milimeter) nominal size) laid in one layer finished with a floating coat of neat Cement. 40 mm (forty milimeter) thick. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 62 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 63 | Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade inflooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 64 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete.25 mm thick. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 65 | Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 66 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 67 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 68 | Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With whiteeadymixed paint complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 69 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing wood primer pink complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 70 | Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--With white paint complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 71 | 6mm Cement plaster to ceiling (a) In Cement mortar 1:3(1 Cement:3 Sand) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 72 | 15mm Cement plaster in single coat on the fair side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. iv) Cement Mortar 1:6 (1Cement:6 Sand). complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 73 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. iv) Cement Mortar 1:6 (1Cement:6 Sand). complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 74 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 75 | Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand paperedsmooth complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 76 | Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :-eadymixed primer complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 77 | Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with:-- Paint other than white complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 78 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 79 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 80 | Providing & fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor including carriage of material in all leads & lifts (confirming to BIS Specifications)complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 81 | (a)15mm nominal size |
| 82 | (b)20mm nominal size. |
| 83 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 84 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- (ii) Angle Indian Universal closet complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 85 | Providing and fixing 10.00/12.50/15.00 litres vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately). complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 86 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers :SOLID TYPE:a white plastic seat and cover complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 87 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- (i) 630mmx450mm complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 88 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. i) 610 x 510 mm with bowl depth 200 mm. |
| 89 | Providing and fixing C.P. Brass waste for wash basin or sink :- complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 90 | (I) 32mm dia |
| 91 | Providing and fixing M.I. Union for wash basin or sink complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 92 | (I) 32mm dia |
| 93 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. |
| 94 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 750mm x 20mmm complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 95 | (i)Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws. |
| 96 | Providing and fixing toilet peper holderC.P Brass complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 97 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 98 | Providing and fixing CP Brass bib tap with Capstan head15mm dia complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 99 | Providing and fixing C.P. stop cocks 15mm dia including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 100 | Providing and fixing Mixer for kitchen sink with casted swinging spout at top complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 101 | Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 102 | Providing and fixing brass full way valve with wheelcomplete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 103 | a)15mm nominal bore |
| 104 | Providing and fixing PVC floor trap ISI Market of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90mm. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 105 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. omplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 106 | i) 110 mm dia. |
| 107 | (ii) 75 mm dia |
| 108 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc.complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 109 | i) 110 mm dia. |
| 110 | (ii) 75 mm dia |
| 111 | Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm dia. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 112 | Providing and fixing PVC ‘P’ or "S" trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. (i) 110 mm dia. complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
| 113 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :-ii) 1000 litres net capacity tank complete with in all respect.including carriage of material in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
