Construction Of Chara Godown, Additional Room And Renovation Of Old Building At Gashiyar Temple Udaipurnathdwara
Tender Value
25 Lakhs
Estimated cost
Bid Submission
22 Sep 2021
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NATHDWARA → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Chara Godown, Additional Room And Renovation Of Old Building At Gashiyar Temple Udaipurnathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 2 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate1:4:8 Nominal Mix (with graded stone aggregate 40mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth levelincluding curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 grade Design mix |
| 4 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 5 | Random rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 6 | Random rubble stone masonry for Superstructurein cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 7 | Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. |
| 8 | Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtr and with all lift. |
| 9 | Carriage of Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavated rock etc including loading unloading and stacking if required complete in all respect. with a lead for 5 km ( Carraige of material shall be in Shreenath ji properties as per direction of Engineer Incarge ) brought from outside |
| 10 | Brick masonary in Super structure bricks of class designation 75 in Cement mortar 1:4 ( 1 cement : 4 coarse sand ) for three storey from plinth level and include cost of water, scaffolding, centering and shuttering, curing and raking of joints etc. complete in all respect. |
| 11 | Half brick masonry in Super structure using bricks of designation 75 in Cement mortar 1:4 ( 1 cement : 4 coarse sand )up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) |
| 12 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 150 , landings,balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M20 grade Design mix |
| 13 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden membersand removal of formwork for upto floor three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 14 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc. M20 grade nominal mix (with graded stone aggregate 20mm nominal size) |
| 15 | Centering & shuttering with ply wood or steel sheets including shuttering , propping, barcing both ways with wooden members and removal of form work up to floor three level for: Columns, pillars posts and struts etc. |
| 16 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three levelThermo mechanically treated bars (conforming to relevant IS code.) |
| 17 | Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension). With 75 mm opening when closed. |
| 18 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] ventilator & Windows side hung (openable) |
| 19 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 20 | Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry tomatch the shade of the slab including rubbing and polishing complete 20mm thick For area of each slab From 2001Sq.cm to 5000 sq.cm 25 mm thick slab |
| 21 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 22 | add extra for using tiles of size 300 x 450 mm over item no.30 |
| 23 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 24 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20mm thick |
| 25 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. |
| 26 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 27 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Jhunjhunu/Jalore(Red/Choclate colour) (2) 801cm2 to 1500 cm2 Tiles |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 29 | Random rubble dry Stone Kharanja undre floor |
| 30 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 31 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. New Work |
| 32 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance. |
| 33 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 34 | Providing Cement based water proofing treatment to RCC Roof with brick bats 25 mm to 100 mm in CM 1:4 (1-Cement : 4-Sand) the under layer being 20mm thick bed plaster of cement sand mortar 1:6 with neat cement punning @ 3 Kg/sqm including cleaning of RCC surface and adding of water proofing compound at all stages at 2% of weight of cement including curing etc. complete in all respect finishing with 20mm thick cement sand mortar of mix 1:4 mixed with water proofing compound. |
| 35 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 200x110x130 cms (for 10 users) |
| 36 | add extra for using tiles of size 300 x 450 mm over item no.30 |
| 37 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in R.C.C. slab/stone slab roofing including cutting chase and making good and painting exposed portion of the clamps complete: In new roof |
| 38 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:Size 580x440mm. |
| 39 | P & F Europeantype white glazed vitreous china Ist quality W.C.pan (I.S: 2556 Mark) withP or S trap including cutting and making good the wall and floor. |
| 40 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. |
| 41 | P & F C.P. lugs for toilet seat cover. |
| 42 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm. |
| 43 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC withCP brass long band. |
| 44 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. |
| 45 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.:Size 580 mm x 450 mmDIA |
| 46 | P & F Bottle Trap of approved make : C.P Brass 32 mm |
| 47 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers.Size 600 x 450mm x 4 mm thick |
| 48 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge. Swan neck pillar cock 15 mm nominal size |
| 49 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Bib Cock with long thread 15 mm nominal size |
| 50 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Angular stop cock with long thread 15 mm nominal size |
| 51 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge. Concealed stop cock 15 mm nominal size |
| 52 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Sink cock with swinging casted spout (table mounted ) 15 mm nominal size |
| 53 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge. 600 mm long towel rail |
| 54 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge. Revolving type towel ring |
| 55 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Soap dish |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal outer dia pipes |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal outer dia pipes |
| 58 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.1000 gm, 25mm. |
| 59 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe withC.P. Brass nuts upto length, 300mm |
| 60 | P & F 15 mm. Dia Connection Pipe of approved quality/make : 600mm. |
| 61 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25 mm nominal bore. |
| 62 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000litres capacity. |
| 63 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia |
| 64 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 65 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Coupler (socket) 75mm dia |
| 66 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Coupler (socket) 110mm dia |
| 67 | Door tee :75mm dia |
| 68 | Door tee :110mm dia |
| 69 | Bend 45 :75mm dia |
| 70 | Bend 45: 110mm dia |
| 71 | Vent Cowel : 75mm dia |
| 72 | Vent Cowel: 110mm dia |
| 73 | Pipe clip :75mm dia |
| 74 | Pipe clip :110mm dia |
| 75 | P trap :110 mm dia |
| 76 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height. In flates, tees, angles & Channals |
| 77 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engineer-in-charge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint. M.S. Sheet 18 S.W.G. |
| 78 | Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension). WITH 75 MM OPENING WHEN CLOSED |
| 79 | Providing corrugated G.I. sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets.0.63mm thick |
AI Tender Summary
Tender Timeline
Sep 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender