Construction Of Malkhana For Excise Station Of Choudwar At Choudwar In The District Of Cuttack For The Year 2021-22 Construction Of Malkhana For Excise Station Of Choudwar At Choudwar In The District Of Cuttack For The Year 2021-22
Tender Value
29.03 Lakhs
Estimated cost
Bid Submission
27 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Choudwar → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Malkhana For Excise Station Of Choudwar At Choudwar In The District Of Cuttack For The Year 2021-22 Construction Of Malkhana For Excise Station Of Choudwar At Choudwar In The District Of Cuttack For The Year 2021-22
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Sep-2021 | Change of class of contractor | Other | 27-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK:- Earth workexcavation in foundation trenches in ordinary soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 2 | Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 3 | Cement concrete of prop.(1:3:6) in foundation and floors using 40mm size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete including de-watering if required comp. |
| 4 | RCC work of M-20 (1:1.50:3)in column, beams, roof slab,Sloped Roof Slab,Stair Case, lintel and chajja, fins, shelves and floors slab in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.A- RCC columnbase footing |
| 5 | B- Grade Beam |
| 6 | C- RCC Column Head room |
| 7 | D- Lintel |
| 8 | E- Chajja |
| 9 | F- RCC Stair case |
| 10 | G- Roof Beam |
| 11 | H- Roof Slab |
| 12 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. S 240 or Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel(Primary Producer like-SAIL /RINL/ TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spaeer bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987. |
| 13 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors. |
| 14 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work |
| 15 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 17 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth inRCC surface, ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 18 | Providing 12mm thick cement plaster in cement mortar (1:4)finished smooth to RCC surface after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Providing 2.5 mm thick Grading Concrete (1:2:2) using10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 20 | Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only) |
| 21 | Supplying, fitting, fixing of KotaTiles16mm thick( above 0.10 sqm) ( Somany,Johnson, Kajaria) in floors, treads, steps and landing slab on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 22 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge |
| 23 | Distempering two coats to wall in all hiehgts with distemper of approved shade over a coat of water bound cement primer to give and even shade inlcuidng cost of distemper all labour T&Petc complete in all respect as per the direction of the Engineer-in-charge. |
| 24 | Painting 2 coats with water proofing weather coat over a coat ofcement bound primer of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. |
| 25 | Painting two coats with synthetic enamel paints iron/ wood workover one coat of primerincluding cleaning the surface with sand papering and using paints of approvedquality and approved shade including cost conveyance taxes of all materials all labourT&P etc. complete as directed by the Engineer in charge. |
| 26 | Providing fitting fixing of fully glazed aluminium framed openable window using 15 micron anodized OELaluminiumsction of 9139, aluminium section 2082, as out section 9139, as mullion section4124, as a shutter section frame with tappered clip of section 4125, aluminium angle, rubber,beading friction stay and handle etc with 5mm thick Black glass including cost of all materials with locking arragement T&P hire charges of drilling machine, labour charges etc. completeas per the direction of engineer in Charge. |
| 27 | E.I. work:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Anchor/Havells/Finolex ) (Make of switch - Legrand /Roma)Group -A L.P -12F.P-5 |
| 28 | Group-B L.P- 10 F.P- 2 |
| 29 | Group-C L.P- 8 E.F.P-2 |
| 30 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FRLS PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with modular type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FRLS PVC insulated single core multistrand copper conductor forloop earthing etc. as required for Separate Board (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/HPL) |
| 31 | Supply and fixing of 5 Amp plug with switch on existing board (Modular Type ) (Make of switch - Legrand /Roma) |
| 32 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(Make- Legrand /Roma) |
| 33 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLS PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 34 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 35 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 36 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 37 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL /PVC conduit as required for Inverter wiring. 1 X 1.5sqmm |
| 38 | Supply and fixing of 15 Amp Top including all acessories and connection for Inverter ( Make : Cona/Anchor/Legrand/Havels) |
| 39 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make- Legrand DMX3/L&T/C&S /Siemens) 8 way,Double door |
| 40 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Legrand DMX 3 /L&T/Siemens) Single pole (SP) |
| 41 | 40/63 Amp DP MCB |
| 42 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .(make-Cona/Anchor) |
| 43 | S/F of step type ModularFan Regulator with all connection completein all respect as per direction of Engineer in charge(Make-Roma/Legrand) |
| 44 | S/F of 48\" size A.C Ceiling fan with all accesories and connection (Make-Usha allure /crompton decora /crompton jura /polycab vital ) |
| 45 | Supply & Fixing of 12 inchHeavy duty Exahust Fan with wall cutting,plastring, painting with all connection complete in all respect as per direction of Engineer in charge(Make- Havells/Almonard / Usha) |
| 46 | Supply and fixing of 18watt LED TUBE LIGHTwith very high efficiency suited for installation in existing G5 lamp holders toglare give free light . (Make:Philips/Havells/Crompton) |
| 47 | S/F of 72wattLEDStreet Light New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including G.I bracket ,M.S clamp ,Anchor fastner withall acccessories and connection.(Make:Philips/Havells/Crompton) |
| 48 | Supply and fixing of Special Copper plate earthing600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing 40mm dia 3mtr long G.I pipe, reveting,sweating and solding of copper tape with cover plate having locking arrangement including excavation of rock pit of size 3\"x3\"x10\" depth, refilling of sand & soft soil and watering the pipe with filling of charcoal and salt etc. as required as per direction of Engineer-in-Charge. |
| 49 | Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required. |
| 50 | Supply of following PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab 35 sqmm 3 1/2 core |
| 51 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 52 | Supply , installation , testing and commissioning 125Amp. INDOORpannel boardwith danger board .16/18 SWG pannel box L24\" X36\"BX 5= 4320 sq. inch for single doormade out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint |
| 53 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L24\" X36\" B including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc. |
| 54 | S/F of bus bar 35 x 5 mm with required size of insulating material and nut and bolts |
| 55 | S/F of bus bar 25 x 5mm with required size of insulating material and nut and bolts |
| 56 | Supply and fixing offollowing size of 4pole MCCB in cubiclepanel board for incoming and out going (Legrand/HPL/Havells/Anchor/L&T) 125 Amp 4-pole 36 KA MCCB (as Incomer) |
| 57 | 63 Amp DP MCB |
| 58 | 40Amp DP MCB |
| 59 | Supply and fixing of Ammeter(0A-500A)with selector switch including all connections |
| 60 | Supply and fixing of voltmeter(0V-500V)with selector switchincluding all connections |
| 61 | Supply and fixing of Indicator lamp with toggler switch and fuse |
| 62 | Installation, testing and commissioning of above MCCB pannel boardwith danger board |
AI Tender Summary
Tender Timeline
Sep 24, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 27, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 28, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender