|
| 1 | Excavating in trenches n exc 1.5 m in depth for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil |
| 2 | M& L PCC 1:4:8type D-2(using 40mm graded stone agg) in foundation, filling and mass concrete. |
| 3 | M&L walling of random rubble masonary , uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:6 |
| 4 | M&L precast cement concrete type C-1, 1:3:6 using 20mm graded stone aggregates, block masonry with solid blocks, exc 10cm width andsetting cement mortar 1:6 complete. |
| 5 | M&L for providing precast cement concrete silid building block or slabs 10cm thick type C1 1:3:6 20mm graded stone aggregate (with plain or interlocking joints as directed) setting in CM 1:4 complete in walls all as specified and as directed. |
| 6 | M&L for 15mm thick CM (1:4) rendering on fair surfaces of bricks or concrete work complete all as specified. |
| 7 | M&L for preparationof new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer. |
| 8 | Returning filling incl spreading leveling watering and well ramming in layers not exceeding 25 mm in any type of soil. |
| 9 | Removing excavated material n.exc. 50 m and deposited were directed at a level n.exc.1.5 m above the starting point |
| 10 | Earth filling in floors including spreading, levelling and ramming with watering as required in layers n.exc 25cm thick. |
| 11 | Hard core of broken stones or boulders of gauge in exc 63mm deposited spread and levelled in layers n. exc 15cm thick incl watering and rolled to true surface. |
| 12 | M&L 75mm thick cement concrete (1:4:8) type D2 using 40mm graded aggregate as in sub base to floor as specified. |
| 13 | M&L forreinforcement cement concrete (nominal mix) type B1 (1:2:4) (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing,foundation beams, plinth beams, bases for coloums etc.complete all as specified and directed by Engr-in-Charge. |
| 14 | Providing plain cement concrete B-1 type (1:2:4) using 20 mm graded crushed stone aggregate as in copings, bed plates, seismic bands, lintels up to 1.5 m clrear span, plinth courses and other similar bands the like finished fair & even, including necessary form work complete all as specified. |
| 15 | M&L for reinforcement cement concrete (nominal mix) type B1 (1:2:4) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge. |
| 16 | Form work to sides of pillers posts struts piers coloums and stanchions etc.complete all as specified and directed by Engr-in-Charge. |
| 17 | Form work to sidesof conrete foundation footings bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work etc. complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F Rolled mild steel Gde Fe-290 (Gde E-165) as in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified |
| 19 | S&F Rolled mild steel Gde Fe-290 (gde E-165) asin Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. |
| 20 | S&F 2nd class softwood(KAIL) as inPlain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 21 | S&F 35mm thick2nd class soft wood (KAIL) plain framed panelled shutters (any No of pannels) with panels of timber flat on both sides (Feather edgeed), or of veneered particle board medium density, wood particle board withcommercial face veneers, supplied and fitted to chowkats complete all as specified and as directed |
| 22 | S&F 100 mm butt hinges medim weight cold rolled mild steel fixed with screws or welded all as directed. |
| 23 | S&Fbutt hinges medium weight cold rolled mild steel of 75 mm long |
| 24 | S&F anodised aluminium barrel tower bolt extruded sections 100 mm size. |
| 25 | All as per item No 24 here-in-before but 150mm size |
| 26 | S&F 125mm extruded aluminium alloy handles febricated type anodised complete all as specified and as directed |
| 27 | S&F 100mm extruded aluminium alloy handles febricated type anodised complete all as specified and as directed |
| 28 | S&F 300mm Aluminium alloy, anodised,sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed |
| 29 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beading in square n exc 0.5 qm m in |
| 30 | S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc dividedinto squares with plain chamfered or rounded, mitred and rebated sash bars any numbers |
| 31 | M&L for preparation of wood and wood based material surface of any description description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed |
| 32 | M&L PCC 1:3:6 type C2 ( using 40 mm grade aggregate) 75 mm thick as in plinth protection/paving complete all as specified and as directed |
| 33 | M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips. |
| 34 | All as per item No 33 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified. |
| 35 | M&L 10 mm thick cement plaster on concrete surface in cement mortar (1:4) finished even and somooth without using extra cement. |
| 36 | M&L preparation of new plastered surfces of walls and applying two coat of OBD over a coat of birla wall care putty for smoothness of surfaces complete all asspecified and as directed. |
| 37 | M&L Non skid Ceramic colouredtiles 7 to 8mm thickarea of each tilesexc 0.18 sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 38 | M&L for screed or bedding layer 15 mm thick in cement mortar 1:6 finished even and fair on floors for laying floor finishes. |
| 39 | M&L 10mm thick, rendering in cement mortar (1:4) in backing coat plaster for skirting/dado. |
| 40 | M&L for Glazed ceramic coloured tiles printed or designer with highlighter and border concept joint free of size 300x200x7 mm thick as in vertical surfaces such as dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile. |
| 41 | S&F vitreous chinasquatting pan \"Orissa pattern\", size 580x440mm white with integral foot rest (excludiig flushing cistern and flush pipe completeall as specified |
| 42 | S&F PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket. |
| 43 | S&F vitreous chinaurinal half stall type complete including provoding and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinals to plug with and incl 60cm long brass screw pointing around urinal back in cement completeall as specified |
| 44 | S&F pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed and fly screwed for iron pipeand fixed fancy type. |
| 45 | S & FWHB counter sunk type ovel under/over counter shape in fixed& on stone slab incl necessary cutting etc complete all as spcifed and directed. |
| 46 | S&F PVC pipe waste pipe 32mm dia and 75cm long incl waste coupling fixed to waste coupling. |
| 47 | S&F, 600mm x 450mm beveled edge mirror of selected quality, glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 48 | S&F PVC (SWR) floor trap, plain with grating including joinery with solvent cement diameter of outlet 75mm |
| 49 | S&F PVC (SWR) pipes single socketed any length, with rubber rings joints laid in floors 75mm dia bore floor trap, plain with grating including jointing with solvent cement, diameter of outlet 75mm dia bore. |
| 50 | S&F bib tap 15 mm bore cast type copper alloy with round handle screwed down screwed for iron pipe or brass ferrule. |
| 51 | S&F 15mm dia GI tubing medium grade with all fittings fixed in floors or fixed to walls or ceiling, in any length, bore complete all as specified and as directed |
| 52 | S&F20mm dia GI tubing medium grade with all fittingsfixed in floors or fixed to walls or ceiling, in any length, bore complete all as specified and as directed |
| 53 | S&F PVC connection15mm size, with PTMT nuts of length 450mm |
| 54 | S&F rotational moulded polytheline water storage tank 1000 Ltrs capacity (cylinercial/vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 55 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron ipe and fixed of 20mm bore dia as in repairs. |
| 56 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 57 | S&F for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 58 | M&L prepation of new or previously untreated surfaces on steel of any description, over 10cm in width or girth, not otherwise described andapplying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 59 | Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Min Wt 170 gms) |
| 60 | Excavation in trenches, not exc, 1.5 m wide and n exc 1.5 depth for foundatio, shafts,wells,cesspits,manholes etc n exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in hard/dence soil. |
| 61 | Returning, filling incl spreading, levlling, watering and well ramming in each layer n.exc 25 cm thick. |
| 62 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point and disposal. |
| 63 | M&L PCC soild block masonry built in PCC (1:3:6) type C-1 (using 20mm graded stone agg) and set in CM 1:6 exc 10cm in width. |
| 64 | M & L mild steel TMTbars 10mm and over in dia,cut to length bent to shape required,including cracking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 65 | M&L 10 mm thick cement plaster on concrete surface in cement mortar (1:6) finished even and somooth without using extra cement. |
| 66 | M& L PCC type D-21 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete all as specified and directed. |
| 67 | PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors |
| 68 | M&LCement concrete Type BI (1:2:4) 20 mm graded aggregate for coping all as specified and directed. |
| 69 | M&L Cement concrete 1:2:4 type B 2(using 40mm graded aggregate) in surface channels and drain complete all as specified and directed. |
| 70 | Providing precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers,shelves and similar articles with plain frames set in CM1:6 ,all as specified and directed. |
| 71 | M&L for forming fair finishes drain or channel 30 cm inner girth in cement concrete using extra cement all as specified and directed. |
| 72 | Sockage well exc in hard dence soil, foundation in PCC 1:3:6 well of honey combed and each solid in m - 25 concrete , including , intercepting chamber, screen chamber stone work in CM 1:4 RCC cover slab in M- 25 filling with stone boulder complete of 3.00 dia amd 3.00 m deep ( Drg No - CESZ/TD/ -1078/2011, Sheet - 1/1). |
| 73 | M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connectedto common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer pointcontrolled by one switch, complete. |
| 74 | All as per Srl item No 73.00 here in before but usingcable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 75 | S & F Switch piano flush type 5 Amps, single pole one way. |
| 76 | S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Ampsflush type. |
| 77 | S & F Switch socket combination 2 in 1,5 and 15 Ampsflush type. |
| 78 | S & F Ceiling rose surface bakelite 65x50mm, two to three terminals. |
| 79 | S & F Sheet metal enclosure for DB\"s Single door,single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. |
| 80 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning. |
| 81 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning. |
| 82 | S&F1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified. |
| 83 | Supply and fixing LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 84 | Supply and fix exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers. |
| 85 | Note : Deduction for amount of Rs 0.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract. |
