Military Engineer Services-MES has published Repairs To Flooring Roofs Plumbing Works And Other Connected Works At Certain Location At Zone 7 And Div Camp At New Cantt Under Ge Gangtok Repairs To Flooring Roofs Plumbing Works And Other Connected Works At Certain Location At Zone 7 And Div Camp At Ne. Submission Date for this Tender is 20-09-2021. Plumbing and Sanitary Work Tenders in Gangtok Sikkim. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling Wrought Iron or Mild Steel Work, viz. Mild Steel Flat Iron (Wind Tie) and Similar Work including Mild Steel Bolts, Nuts, etc., complete all as specified and as directed. |
| 2 | Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Sqm but n.exc 4 sqm complete all as specified and as directed. |
| 3 | All as per item No 2 above but n.exc 1.5 sqm each complete all as directed. |
| 4 | Taking down Shutter of any description not exc 1.0 Square Metre Each complete all as specified and as directed. |
| 5 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed. |
| 6 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. |
| 7 | Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Demolition of cementconcrete(reinforcered)of any description and in any position not otherwise specifically provided for and removal of rubbish of the site complete all as directed.(reinforcement cut as required to facilitate demolition). |
| 9 | Demolition of precast concrete block walling built in cement mortar all as specified. |
| 10 | Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness including Nainital or similar Roof Coverings, complete all as specified and as directed. |
| 11 | Hacking out old/broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed. |
| 12 | M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints complete all as specified and as directed. |
| 13 | Taking down Shutter of any description exc 1.0 Square Metre but n.exc 2 sqm Each and refixing in the same opening, complete all as specified and as directed. |
| 14 | M&L Factory Made 35mm thick Plain Framed, Panelled Shutter (Two Panel) with Lock Rail and Panel of 9mm BWP, Commercial Ply or 12mm Veneered Particle Board with commercial veneering on both faces having size of Rails and Stiles as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fitted to Wooden Chowkat, complete all as specified and as directed. |
| 15 | M&L Factory Made Second Class Hardwood 30mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed. |
| 16 | S&F 35 mm thick Flush door shutter, solid core construction, with block board core and plywood face panels. Commercial type on one side and other face covered with decorative face veneer with 6mm thick teak wood lipping / frame to match complete all as specified and as directed. |
| 17 | S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2020) complete all as specified & directed. |
| 18 | S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020)complete all as specified and directed. |
| 19 | S&F aliminium anodised Sliding Door Bolt 250mm long with hasp and staple, (bolt type) and fixing clips of sheet cast or extruded se ction complete all as specified and as directed. |
| 20 | S&F 150mm Aluminium handles, cast type,anodised Extrudedcomplete all as specified and as directed. |
| 21 | S&F Mild Steel Pressed Handle 100mm, Oval type, Stove Enamelled Black and fixed, complete all as specified and as directed. |
| 22 | S&F aluminium anodised Barrel Tower Bolt 150mm long, and fixed, complete all as specified and as directed. |
| 23 | S&F aluminium anodised Barrel Tower Bolt 100mm long, and fixed, complete all as specified and as directed. |
| 24 | S&F Mild Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed. |
| 25 | S&F 100mm Brass handles(decorative type), cast type,polished bright complete all as specified and as directed. |
| 26 | S&F Mild Steel Butt Hinge of size 75mm, medium weight, cold rolled and fixed, complete all as specified and as directed. |
| 27 | Supply and fix continuous (piano) hinges, 30 mm width of flap, mild steel, bright finish or electro galvanised fixed with stainless steel screws complete all as directed. |
| 28 | S&F in repair 18/19 mm thick prelaminated particle board, medium density flat pressed, single layer type with BWR type adhesive fixed with screws to timber frame work or in pelmets as in repairs including teak wood lipping of 6mm thick all round fixed with nails complete all as specified and as directed. |
| 29 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate)as in coping including necessary formwork complete all as specified and directed. |
| 30 | Supply & fix Bib tap , long body cast copper alloy, chromium platedfancy type with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : ESSCO Cat Part No. SQT-511 KN or equivalent approved make |
| 31 | Supply & fix in repairsHand Shower (health faucet) 8 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed. Make : JAQUAR Code- ALD-573 or equivalent approved make |
| 32 | S&Fin repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head chromium plated, scrwed down, high pressure with long screwed shanks, fly-nuts, with scrwed for GI pipe complete all as specified and as directed. Make : ESSCO Code SQT 508KN or equivalent approved make. |
| 33 | S&F in repair 15mm bore dia angular stop cocks, chromium plated with wall flange screweddown, screwed for iron pipe or union and complete all as specified and as directed.Make : JAQUAR Code-CON 059 KN or equivalent approved make. |
| 34 | S&F in repair 15mm bore chroimum plated brass mixer for mixing "Hot" and "Cold" water for wash basin screwed down for iron pipe, complete all as specified and as directed. Make : ESSCO Cat No 516KN or equivalent of approved make. |
| 35 | S&F in repair 15mm bore dia concealed stop cocks, chromium plated with long shank and cup complete all as specified and as directed.Make : ESSCO Code-SQT 514EKN or equivalent approved make. |
| 36 | Taking up or down 15mm bore steel water tubings including fittings from walls/ ceilings and removal from site complete all as specified and as directed. |
| 37 | Refixing 15mm bore GI tubing and connection in new or old position (walls, ceiling and floors etc) including all fittings complete all as specified and as directed. |
| 38 | Supply and fix galvanised steel water tubing 15mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as directed. |
| 39 | Taking up or down 20mm bore steel water tubings including fittings from walls/ ceilings and removal from site complete all as specified and as directed. |
| 40 | Refixing 20mm bore GI tubing and connection in new or old position (walls, ceiling and floors etc) including all fittings complete all as specified and as directed. |
| 41 | Supply and fix galvanised steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as directed. |
| 42 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth as in stone or concrete block wall complete all as specified and as directed. |
| 43 | Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over andincludingcement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 44 | Material & labour fornon skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.. |
| 45 | M&L for dark shade Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, area of each tiles not exceeding 0.36 sqm , as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed/bedding layerin cement mortar (1:6) complete all as specified and directed. |
| 46 | All as per item No45 herein before but in skirting over a backing coat of 10mm thick in cement mortar 1:3complete all as specified and as directed. |
| 47 | M&L 25mm thick Cement Concrete 1:2:4type B1 (12.5mm graded aggre-gate) finished concrete surfaces veen and rough to receive floor finishes complete all as specified and as directeed. |
| 48 | Material and labourfor chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mmthick with grey cement & pigment, set, jointed and pointed in neat cement slurry in floorscementlaid over and includingscreed bed/ bedding layer of 15mm thick in cement mortar(1:6) completeall as directed. |
| 49 | M&L for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path/steps etc finished even and fair without using extra cement including necessary form work complete all as specified and as directed. |
| 50 | M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed. |
| 51 | M&L for 100mm thick PCC (1:2:4), type B2 (using40mm graded stone aggregate) as in hardstanding/flooring etc finished even and fair without using extra cement including necessary form work complete all as specified and as directed. |
| 52 | M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in plinth protection; path/hardstanding etc laid in bays/panels not exc 2.00 Sqm each includng construction points at suitable interval and each corner and filled with bituminous inastic filling(1 Part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 53 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains including forming fair finished to drain channel complete all as specified and as directed. |
| 54 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form, moulds, mittred/stopped ends complete all as specified and as directed. |
| 55 | Add or deduct for each 25mm girth or part thereof over or under 30cm girth complete all as specified and as directed. |
| 56 | M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 57 | M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer"s instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only) |
| 58 | M&L for rendering 5mm thick in cement mortar (1:3) on fair face of concrete surfaces such as ceiling finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 59 | Supply onlyliquid water proofing compound complete all as specified and as directed. |
| 60 | Material & labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concreteetccomplete all as specified & as directed. |
| 61 | Materials and labour for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete including necessary formwork all as specified and as directed. |
| 62 | Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks etc including removal to stores complete all as directed. |
| 63 | S&FPVC(SWR) pipes, half round 150mm bore with rounded edges including all accessories like bend "T" etc for eaves gutter complete all as specified and as directed. |
| 64 | S&F in repair 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring jonts fixed to wall with necessary clamps,bolts etc complete all as specified and as directed. |
| 65 | S&F in repair 110mm bore PVC(SWR) bends any radius complete all as specified and as ddirected. |
| 66 | Supply and fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directd. |
| 67 | Supply and fix in repairs 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring, joints, laid in trenches or under floors including necessary earthwork, fixed on walls complete all as specified and as directed. |
| 68 | Supply and fix in repairs 75mm bore, PVC(SWR) bend of any radius for PVC(SWR) pipes/steel gutters etc, fixed to walls complete all as specified and as directed. |
| 69 | Supply and fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directd. |
| 70 | Supply and fix in repairs 50mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring, joints, laid in trenches or under floors including necessary earthwork, fixed on walls complete all as specified and as directed. |
| 71 | S&F PVC floor trap, Nahani trap, 100mm diameter of outlet, with gratings including jointing to waste pipe fixed in PCC 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and as directed. |
| 72 | Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in- Charge. |
| 73 | Supply and fix 0.50mm thick pre-paintedgalvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley,eaves,etc fixed with self tapping screws complete all as specifiec and directed by the Engr-in-Charge. |
| 74 | M&L for 0.63mm thick CGI sheeting, ISI marked with 275 grams per sqm zinc coating with two corrugation side laps fixed with "L"type or "J"type or cranked hook bolt and washers in roof covering/walls etc complete all as specified and as directed. |
| 75 | S&F in repair 5mm (tinted) sheet glass, ordinary quality in squares exc 0.5 Sqm each pane complete all as specified and as directed. |
| 76 | S&F in repair 4mm (tinted) sheet glass, ordinary quality in squares n.exc 0.5 Sqm each panel complete all as specified and as directed. |
| 77 | S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n.exc 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed. |
| 78 | M&L for applying one coat of white washing including preparation of old/previously treated surfaces of ceiling complete all as specified and as directed. |
| 79 | M&L for applying two coats of white washing including preparation of new or previously untreated surfaces of ceiling complete all as specified and as directed. |
| 80 | M&L for applying two coats of white washing including preparation of new or previously untreated surfaces of wall complete all as specified and as directed. |
| 81 | M&L for preparation of old decorated/plastered surfaces of walls, by brooming down or steel wire brushing, scrapping down smoke soot, mould moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 82 | M&L for preparation of old/new plastered surfaces of walls and applying two coats of soil bound distemper over a coat of primer applied over 3mm thick wall care putty including complete removal of existing treatment complete all as specified and as directed. |
| 83 | M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 84 | M&L for applying two coats of exterior emulsion paint(weather coat) over a coat of alkali resistant primer including preparation of new/old wall surface complete all as specfied and as directed. |
| 85 | M&L for applying one coat of exterior emulsion paint(weather coat) including preparation of old wall surface complete all as specified and as directed. |
| 86 | M&L for preparation of new or previously untreated wooden surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 87 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously un-treated steel surfaces of any description over 10cm in width or girth including preparation of nw steel surfaces complete all as specified and as directed. |
| 88 | M&L for applying one coat of synthetic enamel paint to old or previously treated steel surfaces of any description over 10cm in width or girth including preparation of old steel surfaces complete all as specified and as directed. |
| 89 | M&L preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 90 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 91 | Supply & fix in repairs bevelled edge looking mirror of size 600mm x450mm x 5mm thick with selected quality glass, decorative type with aluminium channel frame, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as specified and as directed. |
| 92 | Supply and fixing in repair star white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520x360x390 mm with "P" or "S" trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, making all necessary connections complete all as specified and as directed.Make : ESSCO Cat part No. ECS-WHT-551PS or equivalent approved make. |
| 93 | S&F stainless steel sink with drainage board made of stainless steel 1.0mm thick for kitchen with plug, washers, waste pipe including cantilever cast iron brackets connecting union of 40mm CP waste fitting and PVC waste pipe of required length with CP/PTMT fly nuts etc complete overall size 915mm x 460mm with bowl size 410mm x355mmx 165mm complete all as specified and as directed.(Make : Nirali Model Elegance or equivalent approved make. |
| 94 | Supply and fix in repair vitreous china squatting pan of "Orissa pattern" of size 580mm x440mm (white) with integral foot rest "P" or "S" trap, front or back inlet, any pattern(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including connection to trap, and to flushing pipe, antisyphonage pipe etc. complete including making good to floor all as specified and as directed. Make : ESSCO Cat Part No. ECS-WHT-453 or equivalent approved. |
| 95 | Supply and fix in repair vitreous china, white colour, flat back, wash hand basin of size 55cm x 40cm x 79 cm fixed with brackets, including providing 32mm dia PVC waste pipe, 32mm bore CP waste coupling with or without padestal and making all necessary connections complete all as specified and as directed. Make : ESSCO Cat part No. ECS-WHT-803 or equivalent approved |
| 96 | Supply and fix PVC connections 15mm size with PTMT/Brass nuts of length 600mm complete all as directed by the Engr-in-Charge. Make Prayag or equivalent make approved. |
| 97 | Supply and fix in repair 10 litre capacity low level PVC flushing cistern(white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.Make : ESSCO Cat part no. WHE-WHT-183L or equivalent approved make complete all as specified and as directed. |
| 98 | S&F in repairs GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 99 | S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle clear or other connecting plates conforing to Fe-410-W(Gde-E-250 quality-A)including one coat of red oxide zinc chrome primer after preparation of surfaces at contractor"s workshop before fabrication complete all as specified and as directed. |
| 100 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 101 | Dismantling of wall and ceiling hard boards/AC sheets(Fibre pulp insulation etc) or insulation board and plywood in any thickness & any position including cover fillets complete all as specified and as directed. |
| 102 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and as directed. |
| 103 | Dismantling timber scantling 40 Sqcm and over in section any position as in unframd work including separating serviceable timber and keeping in safe custody for reuse complete all as specified and as directed. |
| 104 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work in wall/ceiling complete all as specified and as directed. |
| 105 | S&F 6mm thick veneered decorative plywood (both side) grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber/aluminium frame work complete all as specified and as directed. |
| 106 | M&L for 2nd class hard wood timber scantling fixed clean swan including trating with raw linseed oil as in unframed work complete all as specified and as directed. |
| 107 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 3 Sqcm & n.exc 6 Sqcm complete all as specified and as directed. |
| 108 | Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.5 Cum, getting out, returning, filling in an ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm and removing surplus soil to a distance n.exc 50 mtrs complete all as specified and as directed by the Engr-in-Charge. |
| 109 | S&F in repairs Harrison rail, mild steel, chromium plated, 20mm dia with fixing brackets, stops, rollers etc in curtain rails all specified and directed by Engr-in-Charge |
| 110 | M&L for bevelling/rounding to edges of granite slab one edge including rubbing and polishing etc complete all as specified and as directed. |
| 111 | M&L for TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 112 | M&L for labour for TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 113 | M&L for labourfor RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies and in shelves and the like work including necessary form work complete all as specified and as directed. Note : Re-inforcement shall be measured and paid separately. |
| 114 | S&F door closer hydraulically regulated, aluminium(die cast) body designation No.3, universal type, suitable for door shutters or 701 to 850mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and as directed. |
| 115 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 150mm complete all as specified and as directed. |
| 116 | M&L for brickwork with subclass ""B"" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 117 | Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed. |
| 118 | M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed. |
| 119 | M&L for 15mm thick cement screed in cement mortar 1:3 admixed with integral water proofing compound FOSROC complast x 412 IC @ 130 ml per bag cement including a bonding coat of FOSROC""sNiTO bond AR cement slurry/shalimar Tar product, Mumbai No. 1 liquid @ 200ml per bag complete all as specified and as directed and as per manufactuer"s instructions including teting for leak proof treatment. |
| 120 | Materials & labourfor providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by torch application method complete all as per manufacturer"s instructions including testing after complition. |
| 121 | M & L for applying one coat of industrial bitumen 85/25 @ 1.2 Kg/Sqm over applying primer bitumen coat @ 0.30 kg/Sqm including cleaning surfaces complete all as per manufacturer"s instruction. |
| 122 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding to bring top surface of slab in slope complete all as specified and as directed. |
| 123 | S&F grating 100mm dia with hole of PTMT/CP(medium weight 25 gms) complete all as specified and directed. |
| 124 | S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partitions of 600mm x 600mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 23mm x 28mm x 0.30mm thick, cross tee shall be 23mm x 28mm x 0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as per manufacturer"s instructions & specified and as directed. |
| 125 | Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces completeall as specified and directed by the Engr-in Charge. |
| 126 | M&L for 18-20mm thick Granite Slab green in one piece machine cut, as in steps, jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps, cooking platforms, and other similar situations over and including 20mm thick bedding/backing layer in cement mortar (1:6) complete all as specified and as directed. |
| 127 | S & F 8-9 mm thick PVC ceiling/wall panels of interlockng types,width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints,internal/external corner trim,corner cove, F/J edge trims where required fixed with hidden screws to and including suitable steel/wooden frame work of width 75mm complete all as per manufactured instructions and as directed. |
| 128 | S&F in repairs for aluminium anodised, aluminium frames for doors, windows, ventilators with one or more rebates including joinin cleat for fixing etc complete all as specified and as directed.Make : Jindal or equivalent approved make. |
| 129 | S&F aluminium anodised door shutters, aluminium section weighting not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door hinges anodised aluminium snap beading screws etc complete all as specified and as directed.Make : Jindal or equivalent approved make. |
| 130 | S&F aluminium anodised windowand ventilator shutters, fixed type without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, including aluminium grill and anodised aluminium snap beading screws etc. complete all as specified and as directed.Make : Jindal or equivalent approved make. |
| 131 | Taking down carefully old aluminium anodised door frame/door shutte fixed type window complete and refixing it after repairing of door frame/door shutter, pintal hinges including removing and refixing of door closer including all hinges and all fittings complete all as specified and as directed. |
| 132 | Demolition of stone or boulders masonry built in cement mortar including all quoins, arches, pillars, pre-cast PCC bond stones with separating servicebale stones & setting aside for reuse in the work complete all as specified and as directed. |
| 133 | M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted,built in cement mortar (1:6) including brough up to courses comple all as specified and as directed by Engr-in-charge. |
| 134 | All as per Sl item No. 132 here-in-above but except stone. NOTE :- Stone boulders obtained from item No. 131 here-in-above will be re-used. |
| 135 | Labour only for Hand packing (any thickness) at back of walls over arches etc and raising (or lowering) to the required level. NOTE :- Stone boulders obtained from item No. 131 here-in-above. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
