Providing Fhtcs Of Various Lwss Gwss Of Multi Villages Of Gp Amboya Banour Danda Danda Anj Nagheta Shiva Sanog Rajpura In Tehsil Paonta Sahib District Sirmour Hp Co Storage Tank 2000 Ltr Cap 4 No Intake Tank And Laying Jointing Of Gi Pipes In Distributin
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
18 Sep 2021
0 days left
EMD
13610
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paonta Sahib → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fhtcs Of Various Lwss Gwss Of Multi Villages Of Gp Amboya Banour Danda Danda Anj Nagheta Shiva Sanog Rajpura In Tehsil Paonta Sahib District Sirmour Hp Co Storage Tank 2000 Ltr Cap 4 No Intake Tank And Laying Jointing Of Gi Pipes In Distributin System ) At Village Atwal Kotra Mathaur Danda Pagar Dandiwala Kandela Adwar And Kulthina
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock upto all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in-charge. (P.W. & J.W. 50% each) |
| 2 | Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone agg.40mm nominal size)and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge. |
| 3 | Providing form work with steel sheets 3.15mm thick welded with angle iron 30x30x5 mm so as to give rough finish i/c centring shuttering structing and propping etc. with wooden bettens & Ballies, height or propping & centering below supporting floor to ceiling notexceeding 4 mtr.and removal of the same for insitu RCC work and PCC work.including all leads lifts and carriage of material at site & as per direction ofEngineer in-charge in:- |
| 4 | a) Flat surfaces such as sofits and suspended floors, roofs landing and the like floors etc. up to 200 mm in thickness. |
| 5 | b) Vertical surface such as wall (any thickness. Partition and the like i/c attached plasters, buttress , plinth and string course and the like. |
| 6 | Providing and laying cement concrete work 1:1-1/2:3 (1cement:1-1/2 sand: 3 gradeds stone agg. 20mm nominal size & curing complete) excluding cost of form work and reinforcement for RCC work including all leads lifts complete and carriage of material etc. as per directions of Engineer in-charge. |
| 7 | a) Foundation and plinth |
| 8 | b) Wall ( any thickness but not less than 0.10 mtrs) thickness attached pillaster , buttresses plinth and stringcourses etc. |
| 9 | Providing and laying cement concrete 1:2:4 (1cement:2app.sand:4app. graded stone agg.20mm nominal size)and curing complete excluding the cost of form work in reinforcement in Suspended floor, roofs landing and shelves & their supports , balconies beams girders bressumers & cantilever upto floor two level in all height and depth includingall leads liftsand as per the directions of Engineer in-charge. |
| 10 | ProvidingMild Steel/Tor steel reinforcementfor RCC work including bending binding & placing in positing I/c all leads lifts and carriage of material and as per direction of the Engineer-in-charge. |
| 11 | Providing and fixing C.I. manhole cover offrame 600x600 mmmade up of 3.15 mm thick plain MS Sheet fixed in angle Iron frameof 50x50x5mm supportedwith M.S.Flat 50x5mm of center of sheet including finishinghold fast , hinges and locking arrangement and lock of medium size etc, complete in all respect including all leads lifts and carriage of materials as perdirection of the Engineer-in-charge. |
| 12 | Providing& fixing100 mm dia C.I. Vent Pipe including Cowl including all leads lifts and carriage of material and as per direction of the Engineer-in-charge. |
| 13 | Laying & jointing ofG.I. Pipes (Light grade) in trenches( earth work in trenches to be measured and paid for seperately) completencluding all leads lifts and carriage of materials as perdirection of the Engineer-in-charge. |
| 14 | Scour Pipe 50mm dia (L) |
| 15 | Excavation in drains and channels etc. in earth work inall kinds of soil such as pick work,jumper work ,blasting workdecomposed conglomerate saturated soilsoft rock and hardrockincluding dressing of sides and beds andpreparation ofsub grade to level or slope including refilling the trenches and disposing of surplus earth upto all leads lifts disposed earth to be levelled andneatly dressed including jungle clearance and as per direction of Engineer-in-charge. |
| 16 | Laying, jointing ,testing & commissioning in trenchesfollowingdia socketted galvanised mild steel tube of varous dia of light grade as under confirming to BIS: 1239- (Part-I) 1990or latest with upto date ammendments , capable of withstanding required test pressure as BIS Code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be socketted , Tees & bends shall be manufactured from parental pipeetc. and cutting of pipes wherever required as per site requrement as per site conditions including carriage in all leads &lifts and as per direction of Engineer incharge.((earth work in trenches to be measured and paid for seperately) |
| 17 | i)32 mm dia (L) |
| 18 | ii)25 mm dia (L) |
| 19 | iii)20 mm dia (L) |
| 20 | Providing & fixing Brass Full Way Valve with wheel of superior quality as per standard design & relevant ISS of following dia meter complete in all respect including all leads lifts and carriage of material at site as per direction of Engineer in charge. |
| 21 | i)32 mm dia (L) |
| 22 | ii)25 mm dia (L) |
AI Tender Summary
Tender Timeline
Sep 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 18, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender