Mtc Of The Road From Kumarghat Darchawi Road To Saduchandrapara Road During The Year 2021 2022 Shsolingwbm Ii Wbm Iii Carpeting And Earthen Drain Etc Mtc Of The Road From Kumarghat Darchawi Road To Saduchandrapara Road During The Year 2021 2022 Shsolingwb
Tender Value
9.34 Lakhs
Estimated cost
Bid Submission
29 Sep 2021
0 days left
EMD
9347
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kumarghat → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mtc Of The Road From Kumarghat Darchawi Road To Saduchandrapara Road During The Year 2021 2022 Shsolingwbm Ii Wbm Iii Carpeting And Earthen Drain Etc Mtc Of The Road From Kumarghat Darchawi Road To Saduchandrapara Road During The Year 2021 2022 Shsolingwbm Ii Wbm Iii Carpeting And Earthen Drain Etc
BOQ
| Sl. No. | Item Description |
| 1 | Surface DrainsConstruction of unlined surface drains of average crosssectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.(i) Surface Drains in Ordinary Soil(A) Manual Means |
| 2 | Flat Brick solingProviding and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 3 | Brick soling. Brick on edge soling. Providing and laying brick on edge soling layer on prepair subgrade according to line, grade and cross section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 KN as per MORD Technical specificationclause 412. |
| 4 | Brick Edging laid length wise.Providing and laying brick edging laid length wise on prepair subgrade add cross section shown on the drawing , fillig joints with earth, free from clay with a plasticity index not exceeding 6, watering and rolling the same with three whell road roller 80-100KN as per MORD Technical Specificatoonclause 412. |
| 5 | WBM Grading 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming, stone screeningto fill up the interstices of coarse aggregate, watering and compacting to the required density \"Grading 2\" as per MoRD Technical Specification Clause 405.A) By Manual Means |
| 6 | WBM Grading 3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming, stone screeningto fill up the interstices of coarse aggregate, watering and compacting to the required density \"Grading 3\" as per MoRD Technical Specification Clause 405.A) By Manual Means |
| 7 | 20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.Case - I : By Manual Means(I) Bitumen of VG-30 |
| 8 | Tack coat using hot straight run bitumen of grade VG-30 on W.B.M.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications:On W.B.M. @ 0.75 kg/ sqm. |
| 9 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A) By Manual MeansCase - IV : Type D (premix with fine sand)(i) Bitumen of VG-30 |
AI Tender Summary
Tender Timeline
Sep 10, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender