Public Works Department-PWD has published Electrification Of Maternity Block At Chc Enadimangalam Under Parakkodu Block Panchayat, Pathanamthitta ( Dist ) Part-2-Sitc Of Fire Fighting Equipments Electrification Of Maternity Block At Chc Enadimangalam Under Parakkodu Block Panchayat, Pathanamthit. Submission Date for this Tender is 20-09-2021. Electrification Work Tenders in Adoor Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | PART-2-SITC of Fire Fighting Equipments |
2 | od130137/2019_2020 : Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :(a)Horizontal type,multi stage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS (b) 30HP or Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500RPM, suitable for operation on 415volts, 3phase 50Hz ,AC supply with IP55 protection for enclosure,horizontal foot mounted type with Class-"F" insulation, conforming to IS-325.(c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered with anti vibration padsOutput :1620 lpm at 56 m Head |
3 | od130164/2019_2020 : Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Diesel Driven Pump)(a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.(b) 30HP or suitably rated 1500 RPM water cooled with radiator,diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Output : 2280 lpm at 50 m Head |
4 | od130168/2019_2020 : Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)(a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-"F" insulation, conforming to IS : 325.(c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Output 180 lpm at 56 m Head |
5 | 90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
6 | 90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
7 | 90.14.3.2 : Supply and providing heavy duty "A" section neoprene gasket in the panel boardU" section rubber beeding suitable for 1.60/ 2.00 mm sheet |
8 | 90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. |
9 | 90.14.7 : Supply and providing copper earth bus in the panel board |
10 | 90.14.28.2 : S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor |
11 | 90.14.28.8 : S & F Motor starters of the following ratingsFully automatic star deltastarter for 30 to 35HP motor |
12 | 2.1.1 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N |
13 | 2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N |
14 | 2.1.5 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N |
15 | 90.14.29.2 : S & F Motor starters accessories of thefollowingAuxiliary contact block 1 NO + 1 NC for starters |
16 | od132376/2019_2020 : Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete |
17 | od132380/2019_2020 : Supply and Fixing of 100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT |
18 | od129405/2019_2020 : Supply and fixingLED indicator - Blue colour |
19 | od100938/2019_2020 : LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour |
20 | od100939/2019_2020 : 32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base. |
21 | od132374/2019_2020 : Providing and fixing following 9 A, 3 Pole Mini contactor, AC 3 Rating, AC coil in existing panel and giving connection complete |
22 | od100941/2019_2020 : Supply and providing Rotary Selector switch,for auto/ manual operation |
23 | 90.14.29.3 : S & F Motor starters accessories of thefollowingPush button station for starters |
24 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
25 | 2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole |
26 | 2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
27 | 90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
28 | od100942/2019_2020 : Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables 1.50 sq mm single run with required sockets.conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. |
29 | 90.12.7.14 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 10 sq mm with factory made clamp |
30 | 90.12.7.16 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 25 sq mm with factory made clamp |
31 | 9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs forfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.3 X 10 sq. mm (22mm) |
32 | 9.1.9 : Supplying and making end termination with brass compression gland and aluminium lugs forfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.3 X 25 sq. mm (25mm) |
33 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
34 | 90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) |
35 | 90.16.5.4 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) |
36 | 90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
37 | od132980/2019_2020 : Supply, laying and clamping of 2 core 1.5 sq mm PVC insulated and PVC sheathed armoured copper cable,using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
38 | 90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 2 Run |
39 | 90.6.4.3 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 3 Run |
40 | 90.6.4.4 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 4 Run |
41 | 90.6.10.1 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm |
42 | od162679/2019_2020 : Supply and installation of the following sizes of cast iron Foot valvewith strainer to the pump sets complete with bolts,nut gaskets if anyas required etc.- 100mm dia |
43 | od162723/2019_2020 : Supply,installing,testing and commissioning or Air cusion vessel made of mild steel of 250mm dia with automatic air release cock,25mm dia drain valve and shutt off.The vessel shall be 120 cm in height etc.complete |
44 | od162725/2019_2020 : Supply and providing ABC type fire extinguisher 5kg capacity with installation brackets conforming to IS 15222 as required |
45 | od165648/2019_2020 : Supply and installation of CO2 type fire extinguisher 4.5kg capacity and installing with suitable clamps as required |
46 | od162727/2019_2020 : Supply and providing control panel of fire system with display alarm etccomplete with provision for public address as required 8 zone |
47 | od162681/2019_2020 : Supply,installation,testing and commissioningof single acting Air Release Valve with screwedinlet 25mm dia etc. |
48 | od162705/2019_2020 : Supplying,installing,testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc. |
49 | od162685/2019_2020 : Supplying and fixing of Priming tank of size not less than 1000 liters of storage capacity as required etc. |
50 | od162691/2019_2020 : Supply and providing fire brigade inlet 63mm dia 2 way as required |
51 | od162695/2019_2020 : Supply and providing pressuregauge in the existing system as required |
52 | od162697/2019_2020 : Supply and providing pressure switch wityh IP 32 enclosure protection phosphor bronze bellows as sensing elementetc complete |
53 | od162729/2019_2020 : SITC of Hydrant valve single with stainless steel coupling 63mm dia conforming to IS5290 with cap and chain as required |
54 | od162699/2019_2020 : SITC of Non return valve 80mm dia |
55 | od162701/2019_2020 : SITC of Non return valve 100mm dia |
56 | od162703/2019_2020 : Hose cabinet:- Supply and fixing of weather proof Hose cabinet having the size of 750 x 500 x 250mmmade of 16 gauge M.S sheet with PCC supports and full front glass door and locking arrangementssuitable to accommodate 2 Nos 15m long hose pipes and 1 No. branch pipe. The cabinet shall bepainted to scarlet red colourDouble |
57 | od162596/2019_2020 : SITC of Branch Pipe 63mm dia |
58 | od162608/2019_2020 : SITC of Butterfly valve 80mm dia |
59 | od162610/2019_2020 : SITC of Butterfly valve 100mm dia |
60 | od162612/2019_2020 : SITC of Hose reel conforming to IS 884 30mt long 20m internal dia |
61 | od162677/2019_2020 : SITC of Hose 15mt long 63mm dia rubber lined woven jacket |
62 | od162626/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 65mm dia |
63 | od162628/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 80mm dia |
64 | od162630/2019_2020 : Supply and providing Class C Heavy Duty MS pipe with all required specials fasteners supports etc. complete of size 100mm dia |
65 | od162521/2019_2020 : Supply and providing Hooter for audio alarm as required |
66 | od162711/2019_2020 : Supply, erection, testing and commissioning of Talkback field device . |
67 | od162713/2019_2020 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System. |
68 | od162715/2019_2020 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable. |
69 | od162717/2019_2020 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required |
70 | od162523/2019_2020 : Supply and providing manual Call point break of glass type with hammer and chain as required |
71 | od162499/2019_2020 : Supply and providing Assembly point boards of 3mm PVC foam board sizenot less than 16"x16" as required |
72 | od162501/2019_2020 : Supply and providing Glow Sign boards of 3mm PVC foam board sizenot less than 12"x4" as required |
73 | od162503/2019_2020 : Supply and providing Fire Escape Routesizenot less than 16"x16" as required |
74 | od100978/2019_2020 : Copying chargesof Electrical/fire Drawing per A3 sheet additional copies |
75 | od100979/2019_2020 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail