|
| 1 | CHILDREN PLAYGROUND |
| 2 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 3 | Providing, supplying, fillingin foundation and plinth with sand including watering and ramming etc. complete |
| 4 | Cement Concrete 1:4:8 using 40mm size BHG metal of approved qualityin foundation concrete including watering curing with cost of all material, labour, T&P, taxes, royalty etc. complete |
| 5 | Cement concrete solid Block machine mixed and Hydraulic compressed having crushing strength not less than 75kq/cm2 with masonry 1:6 in Foundation & Plinth including cost of all materials, labour, T&P, taxes, royalty, scaffolding etc. complete. |
| 6 | Providing CC (1:1½:3) for RCC/PCC works using 12mm size CBHG chips.washed and screened sand with cost, conveyance, royaltyof materials and including watering curing etc., complete and as per direction of Engineer-in-charge |
| 7 | Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 8 | 12mm thick cement plaster 1:6 finished smooth including cost of all materials, labour, T&P, etc. complete. |
| 9 | Transportation of selected earth from borrowing area and rolling with PRR for levelling the grounded. Complete with minimum 5Km lead and as per direction of EIC |
| 10 | Priming one coat with any approved primer (Plastered Surface) approved shade on new work with all cost of material labour T&P etc. complete. |
| 11 | Wall painting with two coats of Weather seal coat with any approved shade. with all cost of material labour T&P etc. complete. |
| 12 | Fixing tiles (granite ) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete |
| 13 | Supplying, Fitting and Fixing of double swing with cost of material , labour T&P, taxes and necessary foundation if requires.The arched shaped side frame is made of 65 NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is pu coated to give an aesthetic look. The double swing seat are made up of 10 mm thick anti skid chequered reinforced rubber top. The rubber belt seat is suspended on 6 mm plastisol coated GI chain. The ball bearings are mounted inside a specially designed Nylon Clamp. The height of the swing is 7’ and length is 10’. |
| 14 | S/F fixing of Four Seater Merry-go-Round.The main frame of the duck merry go round is made up of 20 NB & 32 NB GI pipes. The GI pipes are pu coated. The stand is made in 80 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The seats are made out of FRP. It accommodates four children at a time.The Equipment shall be painted with PU paints. |
| 15 | S/F fixing of plane slide |
| 16 | Priming one coat with any approved primer (Iron work) & painting two coat with any approved paint to m s door including cost of all materilas & labour cost |
| 17 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge:Stone-finished High Strength Pavers 60mm |
| 18 | Supply & planting Trees - saplings, well developed, (min 3.0m high on full growth), well branched crown, well developed, in 12\" pot or polybag, disease free and Development of Trees including digging of pits, pre-treating pits with anti-termite insecticide, spreading excavated earth around pits, filling good quality soil and FYM mix, and planting each plant including supply of necessary labour and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant (Pit size 1500 x 1500 x 1500mm) including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. |
| 19 | Provision for site Clean, Pre & Post Photograph of work site ,Display Boardother unforeseen item expenditure etc. Complete . |
| 20 | Supplyof smart integrated Solar all in one street light with 140 Lum/w.MPPT Charge controller ,Tiltable LED Panel,Adjustable A10 mounting angle,Mono crystalline solar panel,PIR motion sensor,system wattage 30,solar panel 75,Battery 12.8v30Ah |
| 21 | Supply of 5m height 5 in dia GI (Average dia tappered from bottom to top) tubular pole and at the bottom one base plate of size 30 x 30 x 5 mm having a through hole of size 14 mm dia at the centre of the ase plate with required nut and bolt with pole top cap |
| 22 | Painting of tubular pole with arms with ont coat of red oxide primer and two coats of aluminium paint and bottom one meter with black paint with supply of paints and labour. |
| 23 | Labour charges towards installation of 8 mtr height steel tubular pole including concreting of pole base and couping with supply of concreting materials as per following specification. Planting depth 1.5 mtr pole pit size 1.2 x 1.2 x 1.8 m concreting- 1:4:8 with 4 cm HG metal size and couping of standard size into 40 cm X 40 cm X 50 cm with cement concreting 1:2:4 uaing 20 mm BHCBG chips. THis includes the cost of all concreting materials, labour and hire charges of all T&P materials. The pole is to be installed in proper alignment as per the direction of Engineer in charge, and enclosed drawing and specification. |
| 24 | Labour charges towards installation of smart integrated Solar all in one street light includingcost of allmaterials, labour and hire charges of all T&P materials as per the direction of Engineer in charge, and enclosed drawing and specification |
