Public Administrative Department Government Departments Closing in 0 days TDR #29131374

General Steel Fabrication General Steel Fabrication , A)Angle Iron Posts : Angle Iron Fencing Postmade Of Standard Angle Sections, Cut And Bends At Bottom With Holes Drilled And Top Bent, With One Coat Of Anticorrosive Red Oxide (For Fencing Purpose). , B

Issued by Government Departments · UT LEH, Ladakh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2021
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
25
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
UT LEH → Ladakh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

General Steel Fabrication General Steel Fabrication , A)Angle Iron Posts : Angle Iron Fencing Postmade Of Standard Angle Sections, Cut And Bends At Bottom With Holes Drilled And Top Bent, With One Coat Of Anticorrosive Red Oxide (For Fencing Purpose). , B)Flat Iron Strips Made Of Standard Sections Duly Cut And Holes Drilled, Complete With One Coat Of Anticorrosive Red Oxide (For Fencing Purpose). , Supply & Fixing Of Rolling Shutters Made Of 80X1.20Mm M.S. Latis Interlocked Together Through Their Entire Length And Jointed Together At The End By Locks Mounted On Specifically Designed Pipe Shaft With Brackets Side Together And Arrangement For Inside And Outside Locking With Push And Pull Operation Complete Including Cost Of Providing And Fixing Of Necessary 27.5 Cm Long Wire Springs Grade No. 2 And 1.20Mm Think Ms Top Cover For Rolling Shutters Including Providing And Fixing Of Bail Bearing. The Shutter Can Be Of Size 10’X10’, 8’X7’, 7’X10’, 8’X10’ Etc. (Rate To Be Quoted Per Sm). , Providing/Fixing Of Steel Door/Window Frames And Shutters. , A)         Pressed Steel 18 Gauge (1.25Mm Thick) Sheet Door Frame With 6 No. 14 Gauge 100Mm Long Hinges On The Identified (Left/Right) Side Fixed With Self Thread Screw, 2 Nos. Tie Rods Of 25Mmx5mm At Bottom. Hold Fast (25Mmx5mm Flat 300Mm Long) (3 Nos. Either Side Finished Smooth Welded Joints And Including Primer Coat Of Approved Steel Paint (Product Code:Sdf Door: Single Rebate , B)         Double Rebated , Providing And Fixing Ofb)Pressed Steel 18 Gauge (1.25Mm Thick) Sheet Window Frame With 4 No-14 Kg 75Mm Long Hinges On The Identified (Left/Right) Side Fixed With Self Thread Screw,. Hold Fast (25Mmx5mm Flat 300Mm Long) (2 Nos. Either Side) Finishing Smooth Welded Joints And Including Primer Coat Of Approved Steel Paint (Product Code:Swf) , Single Rebated , Double Rebated , Four Rebated , Iron Gates: Iron Gate Of Double Leaf Made Out Of Isa 50X50x6mm Frame And Support Of M.S. Flat 40X5mm Fitted On Joints Of Cr Sheet Cover 1.6Mm Including Hold Fasts And Locking Arrangement And Vichet-Gate Duly Welded And Painted With Red Oxide Paint. , Supply Of M.S. Grill Of Required Pattern As Per Design: , A) Ornamental Type; , B) Plane Type (Made Of Ms Flat/Ms Round) , C) Square Bar Type , Providing And Fixing Of M.S. Grill Of Required Pattern As Per Design: , A) Ornamental Type; , B) Plane Type (Made Of Ms Flat/Ms Round) , C) Square Bar Type , Sign Boards: Supply Of Sign Boards Made Out Of Isa 50X50x6mm, Legs And Frame With M.S. Flat 40X5mm On Cr Sheet 22 Gauge Duly Welded And Fitted With Nuts Bolts Wherever Required Excluding Cost Ofletter Writing Complete , Steel Sing Boards Made Out Of 2” Dia Ms Pipe Frame Over Legs With 16G Cr Sheets Fitted With M.S. Flat Clips 40X5mm With Pipe Frame And Ms Plate 4”X4” At The Bottom Of The Legs Duly Painted Excluding Cost Ofletter Writing Complete. , Tree Guards: Supply Of Tress Guards Made From Standard Sections, As Per Given Drawing, Consisting Of Round, Square And Angle Etc. Complete With Hold-Fast At The Bottom, Duly Prime Coated. (Supply By Weight Only). , Tree Guard Fabricated Outofwire Mesh 11 G, (1X1)Inch Mesh Fittedwith Isa 25X25x3mmduly Prime Coated. , Mild Steel Tanks: Mild Steel Tanks Made From 6Mm Standard Mild Steel Plates, Size 4’X4’X4’, 6’X6’6’, Duly Primed. , Mild Steel Pipes: Mild Steel Pipes Made From 5Mm/6Mm Standard Mild Steel Plate, Duly Cut, Rolled And Welded Of Internal Diameter Ranging From 75Mm To 300Mm, Length Ranging From 5 Meter To 6 Meter Duly Finished And Primed. , Providing Andfixing Inposition Collapsible Steel Shutter Withvertical Channels(20X10x2)Mm Andbraced With Flat Iron Diagonals(20X5)Mm Size Withtopandbottom Rail Of T-Iron (40X40x6)Mm With 40Mm Dia,Steel Pulleyscomplete Withboltsand Nuts ,Locking Arrangements ,Stoppersandhandles ,Includingapplyinga Primecoat Ofapproved Steel Primer. , Providing And Fixing Of M.S Iron Collapsible Iron Gate Made Out Of Isa,Flat Etc.Fitted With Cross, And Running Support With Rivetswheel Handles Lock Hooks Including All Carriages, Made Out Of Required Steel Sections. , Providing And Fixing Of Welded Mesh Duly Fabricated Frame Having Size 10’X6’Xz1½’ Made Out Of 35X35x5mm Angle Iron Fixed 11 Gauge 25X25 Welded Mesh Having 25Mm Flat Iron Strips/Running Supports On Welded Mesh With One Coat Of Red Oxidepremier Including Charges, , Supply Of Manhole Cover Made Out Of Ias Channels Beams Etc. With One Coat Of Red Oxide Primer. , Manhole Covers Made Of Mild Steel Of Standard Sections, Work Including Cutting, Framing, Welding, Assembling And Applying Red Oxide Paint. Built Of Sections Made Of. , Isj/Ismc (Channels) , Isf/Isa/Isp (Flat, Angle, Plate) , Top Plate Is Held At Specific Points Stiffened With Isa. Assembly Is Fixed With Locking Arrangement. , Providing And Fixing Of Ready Made Panels Made Out Of Isa50x50x6mm Duly Filled With 40X5mm Flat Fixed With 2”X2” B.A Chainlink Fencing Duly Painted With 2 Coats Of Approved Brand Size 6’X6’ With 2 Feet Legs. , Providing And Fixing Of Ready Made Panels Made Out Of Ismc 75X100 Posts. Ms Pipe 40/50Mm Dia Of 1Mm Thick Fixed With Nuts And Bolts Of Required Size Duly Painted Withtwocoats Of Approved Brand.

BOQ

Description: Rate Contract for General Steel Fabrication
Sl. No. Item Description
1a)Angle Iron Posts : Angle Iron Fencing postmade of standard angle sections, cut and bends at bottom with holes drilled and top bent, with one coat of anticorrosive red oxide (for fencing purpose).
2b)Flat iron strips made of standard sections duly cut and holes drilled, complete with one coat of anticorrosive red oxide (for fencing purpose).
3Supply & fixing of Rolling shutters made of 80x1.20mm M.S. Latis interlocked together through their entire length and jointed together at the end by locks mounted on specifically designed pipe shaft with brackets side together and arrangement for inside and outside locking with push and pull operation complete including cost of providing and fixing of necessary 27.5 cm long wire springs grade No. 2 and 1.20mm think MS top cover for rolling shutters including providing and fixing of bail bearing. The shutter can be of size 10’x10’, 8’x7’, 7’x10’, 8’x10’ etc. (Rate to be quoted per SM).
4Providing/fixing of Steel door/window frames and shutters.
5a) Pressed steel 18 gauge (1.25mm thick) sheet door frame with 6 No. 14 gauge 100mm long hinges on the identified (left/right) side fixed with self thread screw, 2 nos. tie rods of 25mmx5mm at bottom. Hold fast (25mmx5mm flat 300mm long) (3 nos. either side finished smooth welded joints and including primer coat of approved steel paint (Product code:SDF Door: Single rebate
6b) Double rebated
7Providing and fixing ofb)Pressed steel 18 gauge (1.25mm thick) sheet window frame with 4 No-14 kg 75mm long hinges on the identified (left/right) side fixed with self thread screw,. Hold fast (25mmx5mm flat 300mm long) (2 nos. either side) finishing smooth welded joints and including primer coat of approved steel paint (Product code:SWF)
8Single rebated
9Double rebated
10Four rebated
11Iron gates: Iron gate of double leaf made out of ISA 50x50x6mm frame and support of M.S. Flat 40x5mm fitted on joints of CR Sheet cover 1.6mm including hold fasts and locking arrangement and vichet-gate duly welded and painted with red oxide paint.
12Supply of M.S. Grill of required pattern as per design:
13a) Ornamental type;
14b) Plane type (made of MS Flat/MS Round)
15c) Square bar type
16Providing and fixing of M.S. Grill of required pattern as per design:
17a) Ornamental type;
18b) Plane type (made of MS Flat/MS Round)
19c) Square bar type
20Sign Boards: Supply of sign boards made out of ISA 50x50x6mm, legs and frame with M.S. Flat 40x5mm on CR Sheet 22 gauge duly welded and fitted with nuts bolts wherever required excluding cost ofletter writing complete
21Steel sing boards made out of 2” dia MS Pipe frame over legs with 16g CR Sheets fitted with M.S. Flat clips 40x5mm with pipe frame and MS plate 4”x4” at the bottom of the legs duly painted excluding cost ofletter writing complete.
22Tree guards: Supply of tress guards made from standard sections, as per given drawing, consisting of round, square and angle etc. complete with hold-fast at the bottom, duly prime coated. (Supply by weight only).
23Tree guard fabricated outofwire mesh 11 G, (1x1)inch mesh fittedwith ISA 25x25x3mmduly prime coated.
24Mild Steel Tanks: Mild Steel Tanks made from 6mm standard mild steel plates, size 4’x4’x4’, 6’x6’6’, duly primed.
25Mild steel pipes: Mild steel pipes made from 5mm/6mm standard mild steel plate, duly cut, rolled and welded of internal diameter ranging from 75mm to 300mm, length ranging from 5 meter to 6 meter duly finished and primed.
26Providing andfixing inposition collapsible steel shutter withvertical channels(20x10x2)mm andbraced with flat iron diagonals(20x5)mm size withtopandbottom rail of T-iron (40x40x6)mm with 40mm dia,steel pulleyscomplete withboltsand nuts ,locking arrangements ,stoppersandhandles ,includingapplyinga primecoat ofapproved steel primer.
27Providing and fixing of M.S Iron Collapsible Iron Gate made out of ISA,Flat etc.fitted with cross, and running support with rivetswheel handles lock hooks including all carriages, made out of required steel sections.
28Providing and fixing of welded mesh duly fabricated frame having size 10’x6’xz1½’ made out of 35x35x5mm Angle Iron fixed 11 gauge 25x25 welded mesh having 25mm Flat Iron strips/running supports on welded mesh with one coat of red oxidepremier including charges,
29Supply of manhole cover made out of IAS channels beams etc. with one coat of red oxide primer.
30Manhole covers made of mild steel of standard sections, work including cutting, framing, welding, assembling and applying red oxide paint. Built of sections made of.
31ISJ/ISMC (Channels)
32ISF/ISA/ISP (Flat, Angle, Plate)
33Top Plate is held at specific points stiffened with ISA. Assembly is fixed with locking arrangement.
34Providing and fixing of ready made panels made out of ISA50x50x6mm duly filled with 40x5mm flat fixed with 2”x2” B.A Chainlink fencing duly painted with 2 coats of approved brand size 6’x6’ with 2 feet legs.
35Providing and fixing of ready made panels made out of ISMC 75x100 posts. MS pipe 40/50mm dia of 1mm thick fixed with nuts and bolts of required size duly painted withtwocoats of approved brand.

AI Tender Summary

OUR REF NO 29131374
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 16-09-2021
Authority
Authority Name Jammu And Kashmir Small Scale Industries Development Corporation Limited
Work Description General Steel Fabrication General Steel Fabrication , A)Angle Iron Posts : Angle Iron Fencing Postmade Of Standard Angle Sections, Cut And Bends At Bottom With Holes Drilled And Top Bent, With One Coat Of Anticorrosive Red Oxide (For Fencing Purpose). , B)Flat Iron Strips Made Of Standard Sections Duly Cut And Holes Drilled, Complete With One Coat Of Anticorrosive Red Oxide (For Fencing Purpose). , Supply & Fixing Of Rolling Shutters Made Of 80X1.20Mm M.S. Latis Interlocked Together Through Their Entire Length And Jointed Together At The End By Locks Mounted On Specifically Designed Pipe Shaft With Brackets Side Together And Arrangement For Inside And Outside Locking With Push And Pull Operation Complete Including Cost Of Providing And Fixing Of Necessary 27.5 Cm Long Wire Springs Grade No. 2 And 1.20Mm Think Ms Top Cover For Rolling Shutters Including Providing And Fixing Of Bail Bearing. The Shutter Can Be Of Size 10’X10’, 8’X7’, 7’X10’, 8’X10’ Etc. (Rate To Be Quoted Per Sm). , Providing/Fixing Of Steel Door/Window Frames And Shutters. , A)         Pressed Steel 18 Gauge (1.25Mm Thick) Sheet Door Frame With 6 No. 14 Gauge 100Mm Long Hinges On The Identified (Left/Right) Side Fixed With Self Thread Screw, 2 Nos. Tie Rods Of 25Mmx5mm At Bottom. Hold Fast (25Mmx5mm Flat 300Mm Long) (3 Nos. Either Side Finished Smooth Welded Joints And Including Primer Coat Of Approved Steel Paint (Product Code:Sdf Door: Single Rebate , B)         Double Rebated , Providing And Fixing Ofb)Pressed Steel 18 Gauge (1.25Mm Thick) Sheet Window Frame With 4 No-14 Kg 75Mm Long Hinges On The Identified (Left/Right) Side Fixed With Self Thread Screw,. Hold Fast (25Mmx5mm Flat 300Mm Long) (2 Nos. Either Side) Finishing Smooth Welded Joints And Including Primer Coat Of Approved Steel Paint (Product Code:Swf) , Single Rebated , Double Rebated , Four Rebated , Iron Gates: Iron Gate Of Double Leaf Made Out Of Isa 50X50x6mm Frame And Support Of M.S. Flat 40X5mm Fitted On Joints Of Cr Sheet Cover 1.6Mm Including Hold Fasts And Locking Arrangement And Vichet-Gate Duly Welded And Painted With Red Oxide Paint. , Supply Of M.S. Grill Of Required Pattern As Per Design: , A) Ornamental Type; , B) Plane Type (Made Of Ms Flat/Ms Round) , C) Square Bar Type , Providing And Fixing Of M.S. Grill Of Required Pattern As Per Design: , A) Ornamental Type; , B) Plane Type (Made Of Ms Flat/Ms Round) , C) Square Bar Type , Sign Boards: Supply Of Sign Boards Made Out Of Isa 50X50x6mm, Legs And Frame With M.S. Flat 40X5mm On Cr Sheet 22 Gauge Duly Welded And Fitted With Nuts Bolts Wherever Required Excluding Cost Ofletter Writing Complete , Steel Sing Boards Made Out Of 2” Dia Ms Pipe Frame Over Legs With 16G Cr Sheets Fitted With M.S. Flat Clips 40X5mm With Pipe Frame And Ms Plate 4”X4” At The Bottom Of The Legs Duly Painted Excluding Cost Ofletter Writing Complete. , Tree Guards: Supply Of Tress Guards Made From Standard Sections, As Per Given Drawing, Consisting Of Round, Square And Angle Etc. Complete With Hold-Fast At The Bottom, Duly Prime Coated. (Supply By Weight Only). , Tree Guard Fabricated Outofwire Mesh 11 G, (1X1)Inch Mesh Fittedwith Isa 25X25x3mmduly Prime Coated. , Mild Steel Tanks: Mild Steel Tanks Made From 6Mm Standard Mild Steel Plates, Size 4’X4’X4’, 6’X6’6’, Duly Primed. , Mild Steel Pipes: Mild Steel Pipes Made From 5Mm/6Mm Standard Mild Steel Plate, Duly Cut, Rolled And Welded Of Internal Diameter Ranging From 75Mm To 300Mm, Length Ranging From 5 Meter To 6 Meter Duly Finished And Primed. , Providing Andfixing Inposition Collapsible Steel Shutter Withvertical Channels(20X10x2)Mm Andbraced With Flat Iron Diagonals(20X5)Mm Size Withtopandbottom Rail Of T-Iron (40X40x6)Mm With 40Mm Dia,Steel Pulleyscomplete Withboltsand Nuts ,Locking Arrangements ,Stoppersandhandles ,Includingapplyinga Primecoat Ofapproved Steel Primer. , Providing And Fixing Of M.S Iron Collapsible Iron Gate Made Out Of Isa,Flat Etc.Fitted With Cross, And Running Support With Rivetswheel Handles Lock Hooks Including All Carriages, Made Out Of Required Steel Sections. , Providing And Fixing Of Welded Mesh Duly Fabricated Frame Having Size 10’X6’Xz1½’ Made Out Of 35X35x5mm Angle Iron Fixed 11 Gauge 25X25 Welded Mesh Having 25Mm Flat Iron Strips/Running Supports On Welded Mesh With One Coat Of Red Oxidepremier Including Charges, , Supply Of Manhole Cover Made Out Of Ias Channels Beams Etc. With One Coat Of Red Oxide Primer. , Manhole Covers Made Of Mild Steel Of Standard Sections, Work Including Cutting, Framing, Welding, Assembling And Applying Red Oxide Paint. Built Of Sections Made Of. , Isj/Ismc (Channels) , Isf/Isa/Isp (Flat, Angle, Plate) , Top Plate Is Held At Specific Points Stiffened With Isa. Assembly Is Fixed With Locking Arrangement. , Providing And Fixing Of Ready Made Panels Made Out Of Isa50x50x6mm Duly Filled With 40X5mm Flat Fixed With 2”X2” B.A Chainlink Fencing Duly Painted With 2 Coats Of Approved Brand Size 6’X6’ With 2 Feet Legs. , Providing And Fixing Of Ready Made Panels Made Out Of Ismc 75X100 Posts. Ms Pipe 40/50Mm Dia Of 1Mm Thick Fixed With Nuts And Bolts Of Required Size Duly Painted Withtwocoats Of Approved Brand.
Basic Detail
Tender No SICOP/UTL/2021-22/50a Dated 08-09-2021.
Bidding Type Tender
Location
City UT LEH
State Ladakh
Key Dates
Publish Date 08 Sep 2021
Submission Date 16 Sep 2021
Open Date 17 Sep 2021
Finance
Tender Value Ref. Documents
Tender Fee 25
EMD 5000
Exemption Not Available
Document List
b6f76366-b037-463b-8f59-1d4bc62697a8.html
BOQ_281813.xls
SBD50a.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 08, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 16, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Sep 17, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b6f76366-b037-463b-8f59-1d4bc62697a8.html

xls

BOQ_281813.xls

pdf

SBD50a.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders