Construction Interior And Exterior Decoration Of Multistoried Mega Showroom Of Boyanika Bargarh Construction Interior And Exterior Decoration Of Multistoried Mega Showroom Of Boyanika Bargarh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2021
0 days left
EMD
3.78 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Interior And Exterior Decoration Of Multistoried Mega Showroom Of Boyanika Bargarh Construction Interior And Exterior Decoration Of Multistoried Mega Showroom Of Boyanika Bargarh
BOQ
| Sl. No. | Item Description |
| 1 | Providing Single under reamed Bore compaction piles of 375 mm dia up to required length (measured from the bottom of the pile cap) with R.C.C. M-25 having minimum compressive strength in work test of 250 Each Kg. / centimeter square in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips (20 mm. size Each Not to exceed 25%) of approved quality and from approved quarry including hoisting, lowering, lyingand compacting concrete, watering and curing for 28 days, centering & shuttering with proper reinforcement and shoe of approved design with required T & P necessary for the work (i.e. wintch, tripod, Augor, cutter) etc. excluding cost of M.S. rod or tor steel and labour charges for cutting, straightening coiled or bent rods with necessary bending and welding to form a cage according to the approved design including cost conveyance, loading and unloading, royalties, taxes of all materials and cost of all labour, T & P, sundries required for the work complete including de-watering if required complete in all respect as per the instruction of the Engineer-in-Charge.Upto 6meter length |
| 2 | For each additional depth of 0.5m beyond initial depth of 6.0m add extra to the rate |
| 3 | Providing Single under reamed Bore compaction piles of 300 mm dia up to required length (measured from the bottom of the pile cap) with R.C.C. M-25 having minimum compressive strength in work test of 250 Each Kg. / centimeter square in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips (20 mm. size Each Not to exceed 25%) of approved quality and from approved quarry including hoisting, lowering, lyingand compacting concrete, watering and curing for 28 days, centering & shuttering with proper reinforcement and shoe of approved design with required T & P necessary for the work (i.e. wintch, tripod, Augor, cutter) etc. excluding cost of M.S. rod or tor steel and labour charges for cutting, straightening coiled or bent rods with necessary bending and welding to form a cage according to the approved design including cost conveyance, loading and unloading, royalties, taxes of all materials and cost of all labour, T & P, sundries required for the work complete including de-watering if required complete in all respect as per the instruction of the Engineer-in-Charge.Upto 6meter length |
| 4 | Earthwork in excavation of foundation trenches in Ordinary soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 5 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 6 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 7 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floorsusing Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 8 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect with rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete as per specification and direction of Engineer-in-charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 9 | Column Base |
| 10 | Column-Basement floor |
| 11 | Column-Ground floor |
| 12 | Column-First floor |
| 13 | Column-Second floor |
| 14 | Grade Beam |
| 15 | Roof Beam-Basement floor |
| 16 | Roof Beam-Ground floor |
| 17 | Roof Beam-First floor |
| 18 | Roof Beam-Second floor |
| 19 | R.C.C. Wall-Basement |
| 20 | R.C.C. Wall-Ground floor |
| 21 | R.C.C. Wall-First floor |
| 22 | R.C.C. Wall-Second floor |
| 23 | Roof Slab-Basement floor |
| 24 | Roof Slab-Ground floor |
| 25 | Roof Slab-First floor |
| 26 | Roof Slab-Second floor |
| 27 | Staircase-Basement floor |
| 28 | Staircase-Ground floor |
| 29 | Staircase-First floor |
| 30 | Lintel-Ground floor |
| 31 | Lintel-First floor |
| 32 | Lintel-Second floor |
| 33 | Shelves-Ground floor |
| 34 | Shelves-First floor |
| 35 | RCC Fin-Ground floor |
| 36 | RCC Fin-First floor |
| 37 | Providing, fixing and placing ofTor steel (HYSD) Fe-500 IS 1786-2008 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and Each Each No separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. |
| 38 | Basement Floor |
| 39 | Ground floor |
| 40 | First Floor |
| 41 | Second Floor |
| 42 | Laying of PVC conduit for light point /exhaust fan/ ceiling fan pointwith 20 mm dia non-metalic PVCconduit with ceiling rose, ISI marked mounted on G.I modular box with face plate & cover of suitable size also including all accesories and connection as per direction of Engineer in Charge. |
| 43 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 44 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 45 | Basement Floor |
| 46 | Ground floor |
| 47 | First Floor |
| 48 | Second Floor |
| 49 | 12mm thick cement plaster (1:6) on brick work with Portlandslag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 50 | Basement Floor |
| 51 | Ground floor |
| 52 | First Floor |
| 53 | Second Floor |
| 54 | Providing 16mm thick cement plaster (inside )in all floors at all height with cement mortar of mix (1:6) with Portlandslag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 55 | Basement Floor |
| 56 | Ground floor |
| 57 | First Floor |
| 58 | Second Floor |
| 59 | Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 60 | Basement Floor |
| 61 | Ground floor |
| 62 | First Floor |
| 63 | Second Floor |
| 64 | Providing Cement Concrete tile of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 65 | Supplying, fitting and fixing of M.S. grill in windowsincluding screws as may be required and also including tying, welding, finishing to the welded surfaces, as per approved drawing etc with cost, conveyance, labour, T&P etc. required for the complete in all respect. |
| 66 | Supplying, fitting and fixing of M.S. Gate including screws as may be required and also including tying, welding, finishing to the welded surfaces, as per approved drawing etc with cost, conveyance, labour, T&P etc. required for the complete in all respect. |
| 67 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 68 | Basement Floor |
| 69 | Ground floor |
| 70 | First Floor |
| 71 | Second Floor |
| 72 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) interior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 73 | Ground floor |
| 74 | First Floor |
| 75 | Second Floor |
| 76 | Painting 2 coats with any enamel paint on newiron work including cost of paintin all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 77 | Painting 2 coats with any enamel paint on newwood work including cost of paintin all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 78 | Supplying, fitting and fixing well dressed and well seasoned sal wood choukathsframed and fixed including two coats coats of coaltaring to wall and lintel side faces of choukaths including cost of coaltar and labour for coaltaring and fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws including cost, conveyance, loadingrequired for the work etc. complete in all respect with cost, conveyance, royalties, loading, unloading and taxes of all materials and cost of all labour, T&P, sundries, scaffolding etc. required for the work complete in all respect as per specification and direction of Engineer in Charge |
| 79 | Ground floor |
| 80 | First Floor |
| 81 | Second Floor |
| 82 | Supplying fitting and fixing in position flush door shutter of 32mm thick with 1mm Laminate of approved quality and as per drawing & design with all necessary brass fittings, door closer (godrej, heavy duty) motrice lock (godrej heavy duty),including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge. |
| 83 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) |
| 84 | Extra for providing Handle of SS 304 pull handle-H-Type 32mm dia 600mm long of Godrej 7272 or approved equivalent |
| 85 | Extra for providing gladss door lock -05 D/b with strick plate of Godrej 5515or approved equivalent |
| 86 | Providing, fitting and fixing fully glazed (2/3 track)UPVC windows/ventilators with necessary fittings, fixtures and hardwares like concealed locks ,handles, etc., glazed with 5mm thick frosted/plain/ black glass free from saint gobain or any surface deformation, with sun reflective film, as per the drawing and design, and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling gaps if any, between the frames walls/ columns, with appropriate sealant, including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 87 | Ground floor |
| 88 | First Floor |
| 89 | Second Floor |
| 90 | Providing premium grade vitrified tile flooring 600mm X 600mm of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 91 | Ground floor |
| 92 | First Floor |
| 93 | Providing premium grade vitrified tile in risers and dadoos 600mm X 600mm of approved quality, colour and size in floors, in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper line with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 94 | Ground floor |
| 95 | First Floor |
| 96 | Fixing 30cm x 60cm / 60cm x 60 cm ceramic floor tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand)laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 97 | Ground floor |
| 98 | Fixing 30cm x 30cm ceramic floor tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand)laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 99 | First Floor |
| 100 | Providing30cmx30cm/30cmx60cm size special plain/printed seriesceramic glazed wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge |
| 101 | Ground floor |
| 102 | First Floor |
| 103 | Fixing Cement Concretefloor tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand)laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 104 | Providing 20mm thick granite tile flooring (above0.4 sqm .) of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 105 | Basement Floor |
| 106 | Ground floor |
| 107 | First Floor |
| 108 | Providing 20mm thick granite tile in dadoos and skirting (above0.4 sqm .) of approved quality, colour and size in floors, in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 109 | Basement Floor |
| 110 | Ground floor |
| 111 | First Floor |
| 112 | Groove Cutting to Granite slabs laid in Staircase slabs, in width of 2mm and depth of 2mm with the help of mechanical stone cutter etc. complete as per directions of Engineer-in-charge. |
| 113 | Moulding to Granite slabs laid in floor slabs, in width of 10mm including uniform polishing the same etc. complete as per directions of Engineer-in-charge. |
| 114 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 115 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work per 1 sqm including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification anddirection of Engineer-in-charge. |
| 116 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured |
| 117 | Cutting, welding, hunching, grinding and making frames of MS iron sections with reference to the approved engineering drawing including cost of welding electrode, cost towards machnaries, labour, cost of MS sections, transportation upto site, loading & unloading but excluding GST etc. complete. as per directions of Engineer-in-charge |
| 118 | Providing & fixing Glass Fibre Reinforced concrete (GFRC) orMoulding works for Column Cladding, Top Design, Buttomn Designing including mouldings, patterns, cornices etc. of top thickness & buttomn thickness as specified in drawing & as per manufacturer\"s specification along with fixing accessoriesetc. all complete as per directions of Engineer-in-charge |
| 119 | Providing & fixing Glass Fibre Reinforced concrete (GFRC) Jally/mouldings/coping of minimum thickness of 25mm & Minimum border thickness of 50mm above the RCC/Brickwork as per manufacturer\"s specification along with fixing accessories finished texture etc. all complete as per directions of Engineer-in-charge. |
| 120 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 125mm with carving work upto a depth of 75mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
| 121 | Providing burnt clay Terracota art wall mural of required Size and thickness not less than 25mm for fitting to the wall with required adhesive or clamping with MS Clamps. After fixing the mural to the walls, the contractor have to paint the mural with two coats of approved weather paint to give all weather protection to the mural without affecting the original, colour, texture, shades etc.and all complete as per approved drawings, specifications and directions of the Engineer-In-Charge including all material cost, labour cost, transportation cost, all applicable taxes.Before starting the work the contractor have to approve his design and specifications from the Architect/Engineer-in-charge of the project and also approve his clay model before processing further and also incluing Transportation and fixing of Terracotta art wall mural of required Size and thickness not less than 25mm and fitting to the wall with required adhesive or clamping with MS Clamps including transportation, all labour charges required for fitting and all applicable taxes including all taxes and duties etc. complete |
| 122 | Supplying and Fixing of Pipe Line Trench Cover Made out of Periphery MS Angle and intermediate flats not less than 02 Nos in bothside etc. complete including cost of all material, labour, transportation etc. complete |
| 123 | Design, Supply, fabrication & erection of semi unitised type Structural Glazing systems by using Extruded Aluminium sections of grade 6061-T6 or 6005-T6 conforming to ASTM : GS11A duly powder coated / anodized up to 20 Micron / 35 micron PVDF coated respectively in approved shade and“Hindalco/Jindal/OEL(Alom) ” make having main frame of 104.mm x 55.mm x 1.8mm thick as Mullion & Transom and sub frame of 19x 19 x .08.mm Alunimium Square Tube & Aluminium Angle for openable portions of fixed to existing RCC Beam / column at floor to floor by MS Galvanised Clamps & HDNuts & Bolts as required and approved expansion fasteners of Hilti/ Fischer or equivalent make having 6mm Heat Reflective Soft Coated Solar Control / Coollite ST- series Toughened Glass of Saint Gobain/ AIS make of approved shade, to be fixed with Norton tapes and Structural silicon sealant & weathersilicon of Dow Corning/ Wakhard/GE/JL/ make at all interfaces with building structure in between joints to make leak proof glazing with necessary hardware |
| 124 | Design, Supply, fabrication & erection of semi unitised type Structural Glazing systems by using Extruded Aluminium sections of grade 6061-T6 or 6005-T6 conforming to ASTM : GS11A duly powder coated / anodized up to 20 Micron / 35 micron PVDF coated respectively in approved shade and“Hindalco/Jindal/OEL(Alom) ” make having main frame of 104.mm x 55.mm x 1.8mm thick as Mullion & Transom and sub frame of 19x 19 x .08.mm Alunimium Square Tube & Aluminium Angle for openable portions of fixed to existing RCC Beam / column at floor to floor by MS Galvanised Clamps & HDNuts & Bolts as required and approved expansion fasteners of Hilti/ Fischer or equivalent make having 8mm Heat Reflective Soft Coated Solar Control / Coollite ST- series Toughened Glass of Saint Gobain/ AIS make of approved shade, to be fixed with Norton tapes and Structural silicon sealant & weathersilicon of Dow Corning/ Wakhard/GE/JL/ make at all interfaces with building structure in between joints to make leak proof glazing with necessary hardware |
| 125 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ?85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100 ) specifications |
| 126 | Providing and fixing gypboard suspended false ceiling (single layers) in different levels, recesses,flat areas as per design with G.I. Framework using Gypsteel of perimeter channels, intermediate channels and ceiling sections) and 12.5 mm taped edge gypboard screw fixed to ceiling section as per design , complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape and 2 coats suitable primer nd painting the entire ceiling area with plastic emulsion paint ( 2& more coats ) to get an even shade including cost of all materials,labour, overheads T & P etc.,complete.a as per the detail design and specification and as per the direction of architect incharge. measurement will be taken flat area of the ceiling for payment. |
| 127 | Providing & applying Paint with two or more coats of Best quality Acrylic Emulsion Paint of approved brand, shade and manufacture including on existing putty surface, one coat of cement primer, two coats of acrylic emulsion paint to give an even shade on walls and ceiling, including providing necessary scaffolding, cleaning the surface with water to remove all coating dust etc. including cost of all materials, labour, T&P etc. complete as per specification. complete in all respect as per the direction of architect incharge. |
| 128 | Finishing ceiling surface of roof with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, ,es, labour, T&P etc.complete in all respect as per the direction of architect incharge. |
| 129 | Providing and fixing wooden ceilingat all heights made out of 12mm Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanel including 4mm thick veenering (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanel as per requirement finished with melamine polishing at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 900 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of ply board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of edges of the board and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge or as directed by the Consultant. |
| 130 | Providing & fixing wall & column panelling by fixing Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanelfixed with wall by secondary hard wood ( 50x50mm) forming a grid of 600x600mm & screws . Then fixing laminate 1.00mm thick ofmake Greenply/Century/Greenpanel & shade as per detailed working drawing cost includes all material, labour, lead, T&P etc. complete in all respects as per the direction of Architect/ Engineer in charge. (Ref.SOR Vol:-2, Cluse No.-9.126.1) |
| 131 | Providing & Fixing Cove light trey for indirect lighting of size 6\" x 8\" made of 12.5mm thick Gypsum Board & necessary framing , painting cost includes all material, labour, lead, T&P etc. as directed by achitect / engineer incharge. |
| 132 | Providing and fixingPartition with the help of aluminum master grid and verticals 600mm c/c with Section 8455 (50mm x 50mm x 2mm) of Hindalco and with a intermidiate horizontal grid of 600mm x 600mm c/c with the help of rectangular hollow section B: 9836 of (50.8 x 25.4 x 1.5)mm of Hindalco & other sections installed firmly with the help of required cleats, screws, L/T/I clamps, rawl plugs with Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpaneland4 mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanelafffixed at both side of the partition or 8mm glass where ever is necessary as per the drawing with necessary hardware and melamine polish complete with all material and labour cost as per the direction of the consultant. |
| 133 | Providing and fixing in positioning of table for stone statue made of 19 mm thick ply frame work & CNC cutting board as per architectural drawings including teakwood beading & moulding . All the exposed surface shall be finished with 1 mm thick laminate of approved make and shade. Internal surfaces shall be finished with inner laminate cost includes all material, labour,T&P,lead, hardware of approved make. complete in all respects as per the drawing, specification and as directed by Architectin- charge. (at ground floor) |
| 134 | Providing and fixing full height glass mirror with Saint gobain 6mm thick glass and backside of fibre board support and fixing to the walls with studd of required sizes etc. complete as per technical specification or as directed by Engineer-in-charge |
| 135 | Providing fitting & fixing of display & cash counter upto 600mm depth with 12/19/6mm Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanel with exterior side finished with 4mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanelfixed on ply and melamine polished and interior with veener and matt finished melamine polish as per the design. Shutters where required shall be affixed with auto hinges. and make with all necessary hardware fittings and glue, complete with cost of all materials and labour and as per the direction of the Engineer -in- charge. |
| 136 | Extra for fixing Korean board to the Sales counter top rack of required colour, texure and thickness with all fixing accessories as per specification, approved drawing and directions of Engineer-in-charge. |
| 137 | Providing and fixing flush Door of required size or as per the requirement with leaping to be nailed and pasted around it with 4mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanel to be pasted at both side of the flush door with 8 mm glass all edges polished to be affixed with necessary beading around it as per the direction of the consultant treating the veneer surface and edges withmelamine polish andfixing necessary hardware like bearing hinges ,1 \" ss handle,floor spring and mortise lock/trial room lockset etc .of make HAFELE , EBCO , DORESET , GODREJ or equivalent complete with material,transportation and taxes as per the direction of the consultant. |
| 138 | Providing and fixing flush Door of required size or as per the requirement with leaping to be nailed and pasted around it with 4mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpaneland of Fixed Size (1050mm X 2100mm) to be pasted at both side of the flush door with 8 mm glass all edges polished to be affixed with necessary beading around it as per the direction of the consultant treating the veneer surface and edges withmelamine polish andfixing necessary hardware like bearing hinges ,1 \" ss handle,floor spring and mortise lock etc .of make HAFELE,EBCO,DORESET,GODREJ or equivalent complete with material,transportation and taxes as per the direction of the consultant. |
| 139 | Providing and fixing 12 mm thick frameless toughened glass door with machine polished edges, including providing and fixing oftop & bottom pivot , spring and other hardware of make DORMA, HAFELE,DORESET or equivalentas approvedby the Consultant with all arrangements and making necessary holes if required etc. For fixing therequired doorand treating the joint with necessary glue and silicon all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of the Consultant. |
| 140 | Supplying and installation of Automatic glass door made of with 12mm thick toughen glass with stainless steel patch fittings & floor spring with all accessories ,locking arrangements, 3M film on glass etc.complete with duty floor spring with SS cover plate.The doors to be provided with locking arrangement in patchfittings as well as ss 40mm dia, and approx.600 mm long approved model handles.12mm (clear toughen glass) (Saint Gobain Make) |
| 141 | Supplying, installation and commissioning of Radar type Glass door sensor of Opening Speed : 10 to 50 cm/sec (Incrementally Adjustable) Closing Speed : 10 to 40 cm/sec (Incrementally Adjustable) Hold Open Time : 0.5 to 30 sec (Incrementally Adjustable), Face Mounted with Standard set of Accessories : Radar (2 Nos), Light Barrier (1 No), Program Switch with Knob (1 No) etc. complete with reference to Dorma Model No-XL-C 4100 Automatic Sliding or approved equivalent from Godrej. |
| 142 | Providing and fixing wall paper of approved make & shade complete with necessary arrangement as per detail design including the cost of all materials, labour, overheads and T & P etc. complete in all respects as per the direction of architect / Engineer in charge. |
| 143 | Providing and fixing POP Cornice of approved design. Rate shall be inclusive of necessary fixing required, jointing & finishing without any cracks. Size (=75 mm -100mm=) wide |
| 144 | Providing and fixing Planter made of with 12/19/6mm Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanel, in to the design alcove finished with1mm thick laminet , adequate synthetic pebbles complete as per detail design and as directed by architect incharge. |
| 145 | Providing & fixing of digital display of theme/ pattern including all materials, labour T & PTransportation, etc. complete as per drawing & specification and as directed by the Architect incharge. |
| 146 | Providing and Fixing Solid Teak/Sal wood Hangers of Dia 50mm, duly polished and fixed with required hardware fittings to the provided wall/partition etc. complete including cost of material, labour, polish etc. |
| 147 | Providing fitting & fixing of storage/displayrack upto 400mm depth with with 12/19/6mm Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanel with all side finished with 4mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanel fixed on ply and melamine polished and backside panelwith 1mm laminate of approved colour and texture as per the design. Shutters where required shall be affixed with auto hinges. and make with all necessary hardware fittings and glue, complete with cost of all materials and labour and as per the direction of the Engineer -in- charge.(Type-I) |
| 148 | Providing and fixing in positioning of wall mounted cloth rack for display of cloth with shelves fabricated out of 19 mm thick block board on all side using 1mm thick laminate of of make-Greenlam/Century/Greenpaneland brand supported with cast iron m.s supprots to be fixed using upvc wedge bolt and screw of appropriate size to carry a minimunm load of 5 kg. as per architectural drawing and specification. cost includes all material, labour,T&P,lead, hardware of approved make complete in all respects as per direction of Architect-in-charge. |
| 149 | Poles |
| 150 | Shelves |
| 151 | Providing fitting & fixing of sales counter upto 600mm depth with 12/19/6mm Fire retardent Ply conforming to IS 5509 (2000)of make-Greenply/Century/Greenpanel with exterior side finished with 4mm veneer (price range Rs.150-200.00/sft) of make-Greenply/Century/Greenpanel fixed on ply and melamine polished and interior with veener and matt finished melamine polish as per the design. Shutters where required shall be affixed with auto hinges. and make with all necessary hardware fittings and glue, complete with cost of all materials and labour and as per the direction of the Engineer -in- charge. |
| 152 | Providing & fixingpictograms in 304 grade 2 mm thick brush finished Stainless steel at all levels and locations prepared using silk printing technology/ etching, filling with industrial paint in required colours and baking to the required condition at required temperature for obtaining desired shine and gloss, in required font, design, pattern and size including buffing, polishing etc. and fixing by high quality chemical tape/ adhesive of approved make on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. |
| 153 | Providing & fixingpictograms in 2 mm thick bright finished Brass at all levels and locations prepared using silk printing technology/ etching, filling with industrial paint in required colours and baking to the required condition at required temperature for obtaining desired shine and gloss, in required font, design, pattern and size including buffing, polishing etc. and fixing by high quality chemical tape/ adhesive of approved make on prepared surface, all complete as per architectural drawings and direction of Engineer in charge. |
| 154 | Designing, editing, printing, Providing & fixingat all levels and locations, informatory/ directional/warning signages in required font, design, pattern and sizemade of 4 mm thick odorless Acrylic sheets of make Cast/ Acrylite/ or approved equivalent, conforming to specific gravity of 1.19, tensile strength of 69 MPA, percentage elongation of 4.2 %, modulus of elasticity 2800 MPA (ASTM –D638), refractive index of 149, (ASTM-D542) Rockwell hardness of M94 (ASTM – D785), water absorption of 0.2 % (ASTM- D570) total light transmission of 92 % (ASTM – D 1003) chemical, UV & weather resistant, having excellent insulation properties, abrasions resistant of approved color, of approved quality and make, with beveled edges having self adhesive self luminescent vinyl sheet ( film thickness >150 micron, luminescent duration 4-6 hours) of make 3M/ Avery or approved equivalent over which the signage/ letter cutout made of vinyl sheet ( film thickness > 80 micron) of make 3M/ Avery or approved equivalent is pasted in required colour, font, design, pattern, including fixing over walls/ partition/glass etc, fixing by high quality chemical tape of make 3M/ Avery or approved equivalent on prepared surface and also including Required Light fittings, electrical works, provision for ventilation and Maintainance etc, all complete as per architectural drawings and direction of Engineer in charge. |
| 155 | Designing, editing, printing, providing and fixing backlit display of required size including back framework made of 6mm thick acrylic sheets of approved make, approved matter printed overVinyl film of3M/ Avery or approved equivalent, pasted over front display of 6mm acrylic sheet with suitable adhesive of approved make, including necessar screws, SS studs, clamps etc and making necessary provisions for fixing and maintenance of electrical fittings in the back,including required approved luminair, making and submiting of sample prints/ design in suitable sized paper for approval,and also including Required Light fittings, electrical works, provision for ventilation and Maintainance etc,complete in all respectas per approved drawings , approved printing matter and directions of Engineer-In-Charge. (Area of display face shal be measured from payment |
| 156 | Providing and Fixing 304 Grade Hollow Stainless Steel Pipes/tubes or Rectangular tubes/Pipes etc. all comlete including fixing with required SS Hardware fittings etc. complete |
| 157 | Design, fabricating, supplying and fixing of factory made modular furniture in “ Straight or Rectangular” shape of size 1500 (+/-150) mm x 600(+/-150) mm x 750 (+/- 150)(H) open office workstation system consisting of (A) PARTITION :-self supported flush type CRCA made and 60-70 mm thick tiles / panels forming partition of the open office workstation (modular furniture system), for a total height of average 750 mm , consisting of concealed raceways of 100-125 mm width at just bottom of work surface level , as per requirement including necessary frames, Top caps, adjustable bolts, raceway cover plates etc. complete, of the following type and pattern: (a) Front Partition with panels (minimum 9 mm thick) finished on both sides with laminated finish up to work surface level. Height with raceways at the just bottom of work top. 1 x 1.5 x 0.75 = 1.13 sqm.(b) End Partition (both ends) with panels (minimum 9 mm thick) finished on both sides with laminated finish up to work surface level. Height with raceways at the just bottom of the work top. 2 x 0.6 x 0.75 = 0.9 sqm.(B) WORKSURFACES :-Providing and fixing 25 mm thick MDF board post formed laminated workstation table top with post formedround on both longer (front & outer) edging and balancing lamination at bottom surface as per the following sizes with necessary brackets, fixingarrangements etc. |
| 158 | (a) Rectangular type work surface of over all sizeof1500 mm x 600 mm (Single piece), provided with standard grommet for cable entry etc. 1 x 1.5 x 0.6 = 0.9 Sqm (C ) PEDESTAL MOBILE DRAWER UNIT :-Fabricating, supplying and placing in position the mobile pedestal drawer units of appropriate size 500 mm (Depth), 400 mm (Wide), and 675 mm (H) with lockable castors. The unit shall be fabricated out of CRCA Steel sheets of 18 / 20 gauge and shall be powder coated. The unit shall have proper locking arrangement with single key hole for the top drawer with triplicate keys.(a) With 2 top drawers and one file unit at the bottom. 1 no. (D) Providing and placing in position below work surface movable type CRCA steel powder coated trolley of suitable size for placing CPU unit, made out of 16 gauge CRCA steel sheet, lockable type casters etc, complete.(E) Fabricating, supplying and fixing in position , sliding and lockable computer key board tray made out of CRCA steel powder coated section etc. all complete. |
| 159 | Design, fabricating, supplying and fixing of factory made modular furniture in “L” shape of size 1500 (+/-150) mm x 1500(+/-150) mm x 1220 (+/- 150) (H) open office workstation system consisting of (A) PARTITION :-Cubical self supported flush type CRCA made and 60-70 mm thick tiles / panels forming partition of the open office workstation (modular furniture system), for a total height of average 1220 mm , consisting of concealed raceways of 100-125 mm width at bottom level and 100-125 mm width at the intermediate level, as per requirement including necessary frames, Top caps, adjustable bolts, raceway cover plates etc. complete, of the following type and pattern:(a) Partition with panels (minimum 9 mm thick) finished on both sides with laminated finish up to work surface level and above with one side laminate finish and the other side with fabric provided over soft board panel up to 1220 mm. Height with raceways at the bottom and at work surface level.(b) End Partition with panels (minimum 9 mm thick) finished on both sides with laminated finish up to work surface level and above with both side with glass panel provided up to 1220 mm. Height with raceways at the bottom and at work surface level. |
| 160 | (A)WORKSURFACES :-Providing and fixing 25 mm thick MDF board post formed laminated workstation table top (three pieces) with post formed round front edging and balancing lamination at bottom surface as per the following sizes with necessary brackets, fixingarrangements etc.(a) Pentagonal corner type work surface of over all sizeof1500 mm x 1500 mm x 600 mm (Three pieces i.e 600 x 600 , 900 x 900 & 600 x 600), provided with standard grommet for cable entry etc.(b) Same as above but providing and fixing 25 mm thick MDF board post formed laminated on side full round gable / vertical end with brackets and fixing arrangement of size approx. 725 mm x 575 mm. (1 no. for Two set of work station)(C ) PEDESTAL MOBILE DRAWER UNIT :- Fabricating, supplying and placing in position the mobile pedestal drawer units of appropriate size 575 mm (Depth), 450 mm (Wide), and 675 mm (H) with lockable castors. The unit shall be fabricated out of CRCA Steel sheets of 18 / 20 gauge and shall be powder coated. The unit shall have proper locking arrangement with single key hole for the top drawer with triplicate keys.(a) With 2 top drawers and one file unit at the bottom.(D) Providing and placing in position below work surface movable type CRCA steel powder coated trolley of suitable size for placing CPU unit, made out of 16 gauge CRCA steel sheet, lockable type casters etc, complete.(E) Fabricating, supplying and fixing in position , sliding and lockable computer key board tray made out of CRCA steel powder coated section etc. all complete. |
| 161 | TWO SEATER SOFA- Model: ORCHID of make Stellar Interio / equivalent model from featherlite/Godrej |
| 162 | THREE SEATER SOFA Model: ORCHID of make Stellar Interio / equivalent model from featherlite/Godrej |
| 163 | Coffee TABLE- Model: CT 112 Coffee Table White of make Stellar Interio / equivalent model from featherlite/Godrej |
| 164 | Sofa Side TABLE-White of make Stellar Interio / equivalent model from featherlite/Godrej |
| 165 | Providing and placing midback chair of Godrej Model No. Premier or approved equivalent,having Seat/Back Assembly : The seat and back are made up of 1.2 +/- 0.1cm thick hot pressed plywood and uphoistered with fabric and moulded polyurethane foam with PVC lipping all around, the back foam is designed with contoured lumbar support for extra comfort, centre tilt mechanism, twin wheel metal pedestal, polypropylene fixed Armrestall complete as per drawings, relevant standards, tender specifications and directions of Engineer in charge: |
| 166 | Providing and fixing in positionmodular storage rack of Godrej Model No Pegion Hole or approved equivalent,having 18 compartment having overall height 1800 mm, overall width 850mm, and overall Depth of 390-400mm. (+/- 50mm) All side panels,top/bottom panels and shelf panels are made from 18mm Thick Pre–laminated particle board (interior grade) and Back panel made from 9mm Thick Pre–laminated particle board.Alledges of particle board shall be sealed with hot pressed PVC edge banding The item includes all necessary fittings, accessories, and hardware all completeas perspecifications, drawings and directions of engineer in charge. |
| 167 | Providing and fixing openable shutter 6-door locker units of or approved equivalent in rigid knock down construction of single tower depth of minimum 350 mm depth and 1830 height and made up of epoxy powder coatedCRCA sheet of thickness 0.6-0.8mm, and each locker/ shelf having uniformly distributed load carrying capacityof 35 kg. All the doors shall have punched perforations for proper air ventilation. The unit shall be fitted with approved quality locking arrangement,ABS recessed handlesand label holders, hanger rod (for 1 and two door units), levelers and all necessary hardware and fittings all complete as per drawings, specifications and directions of engineer in charge. The front face area shall be measured for payment. |
| 168 | Roller Blinds : Fixing & Installation of Roller Blinds of Livin Make - Fantasy Series / equivalent as per approved design , quality and colour by the Consultantall complete, including all cost of labour,material, conveyance, T&P etc.as per direction of Engineer-in-charge. |
| 169 | C.C. CAMERA & ANCILLARY WORKS i) HD CCTV CAMERA-1. IR 2MP BULLET DAY & NIGHT CAMERA WITH 24 LED LENS AUTO ADJUSTBLE (20 MTR IR DISTANCE).Of HIK Vision/Honeywell |
| 170 | 2. IR 2MP DOME DAY & NIGHTCAMERA WITH 24 LED LENS AUTO ADJUSTBLE ( 20MTR IR DISTANCE ).Of HIK Vision/Honeywell |
| 171 | 3. 32CH DVR 2.4MP SUPPORTED DVR WITH ALL ACCESSORIESHDMI/VGA ENABLE DVR WITHAUTOMTION SENSOR ENABLE. |
| 172 | 4. 32 CH 20 MP REGULATED POWER SUPPLY WITH PP SYSTEM. |
| 173 | 5. CCTV 3=1 CABLE WITH FULL COPPER. |
| 174 | 6. SECURNET BNC CONNECTOR |
| 175 | 7. SECURNET DC CONNECTOR |
| 176 | 8. 4 TBSURVILLANCE HDD |
| 177 | 9. 32’’ Samsung Led monitor |
| 178 | 10. 10 Mtr HDMI CABLE |
| 179 | 11. Cable Laying charges |
| 180 | 12. Installation charges |
| 181 | INTERNALELECTRIFICATIONINTERNAL POINT WIRING.Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 182 | Basement Floor |
| 183 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.Average Length: 3mtr |
| 184 | Basement Floor |
| 185 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer in Charge. |
| 186 | Basement Floor |
| 187 | Recessed wiring to submain in 2 x6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 188 | Basement Floor |
| 189 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From DB to Switch Board ) |
| 190 | Basement Floor |
| 191 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way SPN Distribution Boards suitable for 230 V, single phase, 2 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-25ADPMCBOutgoings-6-32 A SP MCB- 6 Nos, ( ELDB ) |
| 192 | Basement Floor |
| 193 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 194 | Ceiling mounted indoortype1XTLED Luminaire with LED Lamp Similar to JAQUARCat No.LGLZPCX020XC or equivalent. |
| 195 | Basement Floor |
| 196 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 197 | Ground Floor |
| 198 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.Average Length: 3mtr |
| 199 | Ground Floor |
| 200 | Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. |
| 201 | Ground Floor |
| 202 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer in Charge. |
| 203 | Ground Floor |
| 204 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer in Charge. |
| 205 | Ground Floor |
| 206 | Recessed wiringfor 6 pin 16 amp socket outletwith 5Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 207 | Ground Floor |
| 208 | Recessed wiring to submain in 4 x 6sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 209 | Ground Floor |
| 210 | Recessed wiring to submain in 2 x6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 211 | Ground Floor |
| 212 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 213 | Ground Floor |
| 214 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From DB to Switch Board ) |
| 215 | Ground Floor |
| 216 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 217 | Ground Floor |
| 218 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required. |
| 219 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-40AFPRCBO (100mA)Outgoings-6-32 A SP MCB- 12 Nos. |
| 220 | Ground Floor |
| 221 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-25AFPRCBO (100mA)Outgoings-6-32 A SP MCB- 12 Nos. |
| 222 | Ground Floor |
| 223 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way SPN Distribution Boards suitable for 230 V, single phase, 2 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-25ADPMCBOutgoings-6-32 A SP MCB- 6 Nos, ( ELDB ) |
| 224 | Ground Floor |
| 225 | Supply & laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. |
| 226 | 3.5 C x 150 sq.mm Al |
| 227 | Ground Floor |
| 228 | 3.5 C x 35 sq.mm |
| 229 | 4 C x 16 sq.mm Al |
| 230 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 231 | 3.5 C x 150 sq.mm |
| 232 | Ground Floor |
| 233 | 3.5 C x 35 sq.mm |
| 234 | 4 C x 16 sq.mm |
| 235 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earthand painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. |
| 236 | MAIN PANEL with200A 4P ON LOAD CHANGE OVER SWITCH &200A 4P MCCB -1 No as incomer ,100A 4P MCCB-4 Nos, 63A 4P MCCB -2 Nosas Outgoingwith Electrolytic Copper Bus Bars with 1nos 65KA VSD along with 1nos 32A 4P MCB |
| 237 | C.S PANEL with 63A 4P MCCB -1 No as incomer ,40A 4P MCB-3 Nos, 25A 2P MCB -6 Nosas Outgoingwith Electrolytic Copper Bus Bars. |
| 238 | FLOOR PANEL with 100A 4P MCCB -1 No as incomer ,63A 4P MCB-2 Nos, 40A 4P MCB -2 Nos , 25A 4P MCB -2 Nos,25A 2P MCB -3 Nosas Outgoingwith Electrolytic Copper Bus Bars. |
| 239 | Ground Floor |
| 240 | Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
| 241 | Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 242 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 243 | Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing as required. |
| 244 | Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, G.I tube,having single prong at top,with 85mm dia 6 mm thick G.I base plate including holes etc. complete asrequired |
| 245 | Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required |
| 246 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
| 247 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) |
| 248 | Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required. |
| 249 | Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required. |
| 250 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 251 | Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 252 | Ceiling recessedindoortype Round PANELLED Luminaire with 19 wattLED Lamp Similar to JAQUARCat No. LNVE01R019XW or equivalent. |
| 253 | Ground Floor |
| 254 | Ceiling recessedindoortype SQUARE PANEL LED Luminaire with 24 wattLED Lamp Similar to JAQUARCat No. LNVE025024XW or equivalent. |
| 255 | Ground Floor |
| 256 | Ceiling recessedindoortype COVE STRIP LED Luminaire with Driver Similar to JAQUARCat No. LSTP03X005XW with LDRV01S030XXor equivalent. |
| 257 | Ground Floor |
| 258 | Ceiling mountedIndoortype LED TRACK LIGHT Luminaire with TRACK Similar to JAQUARCat No. LTRLW1R020XW with Track or equivalent. |
| 259 | Ground Floor |
| 260 | Ceiling mounted indoortype1XTLED Luminaire with LED Lamp Similar to JAQUARCat No.LGLZPCX020XC or equivalent. |
| 261 | Ground Floor |
| 262 | Ceiling mounted indoortype2xTLED Luminaire with LED Lamp Similar to JAQUARCat No. LUNI01X22XC or equivalent. |
| 263 | Ground Floor |
| 264 | Ceiling mounted indoortypesurface mounted round LED Luminaire with LED Lamp Similar to JAQUARCat No. LNRO02R012SC or equivalent. |
| 265 | Ground Floor |
| 266 | Ceiling mounted indoortypesurface mounted mirrorLED Luminaire with LED Lamp Similar to JAQUARCat No. LSLM01R009XC or equivalent. |
| 267 | Ground Floor |
| 268 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 269 | Ground Floor |
| 270 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
| 271 | Ground Floor |
| 272 | Recessed wiring to telephone pointwithclip in type modular telephone socket (RJ 11) ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 273 | Ground Floor |
| 274 | Recessed wiring to LAN pointwithclip in type modular lan socket ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 275 | Ground Floor |
| 276 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deepon surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 277 | Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 278 | Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessedPVC conduit as required. |
| 279 | Supplying and drawing UTP 4 pairLAN cat-6 cable in the existing surface / recessed PVC conduit as required. |
| 280 | Construction of 1KM 3ph 3w 11KV OH line over 9mtr long 100x116mm RS Joist with 55mm2 AAAC,and average span 60mtr. |
| 281 | Construction of 1x100KVA,11/0.4KV DP mounted s/s over 9 mtr long 100x116 mmRS Joist pole.(3 star rated) |
| 282 | Substation Outdoor Panel with 200 A 4P MCCB as Incomer & Outgoingas per specification noted earlier. |
| 283 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 284 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 285 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required. |
| 286 | Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. |
| 287 | Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate. |
| 288 | Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate . |
| 289 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
| 290 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. |
| 291 | Supply & delivery of 100-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 250-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge. |
| 292 | Installation, testing andcommissioning of 100-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 250-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge. |
| 293 | Construction of DG set base concrete foundation of 4.8m(L) x 1.8m(W) complete including excavation of soil/ floor as the case may be, base foundation and top & side plastering etc complete as required as per direction of Engineer-in-charge. |
| 294 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 295 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 296 | Supply of Air Cool Air-Conditioning System Indoor Units with Cordless Remote, Sensor & Refnet Round Flow Cassette Unit with Panel including all Hardware fitting, Installation, Testing, Commissioning refrigerant joint, Drain pipe & Support Accessories etc. complete all as instruction of the Engineer-in-charge- 3.0 TR Cassette A.C. Brand-Daikin/Mitsubishi or equivalent. |
| 297 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 298 | First Floor |
| 299 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.Average Length: 3mtr |
| 300 | First Floor |
| 301 | Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. |
| 302 | First Floor |
| 303 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer in Charge. |
| 304 | First Floor |
| 305 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer in Charge. |
| 306 | First Floor |
| 307 | Recessed wiringfor 6 pin 16 amp socket outletwith 5Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. |
| 308 | First Floor |
| 309 | Recessed wiring to submain in 4 x 6sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 310 | First Floor |
| 311 | Recessed wiring to submain in 2 x6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 312 | First Floor |
| 313 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 314 | First Floor |
| 315 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From DB to Switch Board ) |
| 316 | First Floor |
| 317 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 318 | First Floor |
| 319 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required. |
| 320 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-40AFPRCBO (100mA)Outgoings-6-32 A SP MCB- 12 Nos. |
| 321 | First Floor |
| 322 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-25AFPRCBO (100mA)Outgoings-6-32 A SP MCB- 12 Nos. |
| 323 | First Floor |
| 324 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way SPN Distribution Boards suitable for 230 V, single phase, 2 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-25ADPMCBOutgoings-6-32 A SP MCB- 6 Nos, ( ELDB ) |
| 325 | First Floor |
| 326 | Supply & laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. |
| 327 | First Floor |
| 328 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 329 | First Floor |
| 330 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earthand painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. |
| 331 | FLOOR PANEL with 100A 4P MCCB -1 No as incomer ,63A 4P MCB-2 Nos, 40A 4P MCB -2 Nos , 25A 4P MCB -2 Nos,25A 2P MCB -3 Nosas Outgoingwith Electrolytic Copper Bus Bars. |
| 332 | First Floor |
| 333 | Ceiling recessedindoortype COVE STRIP LED Luminaire with Driver Similar to JAQUARCat No. LSTP03X005XW with LDRV01S030XXor equivalent. |
| 334 | First Floor |
| 335 | Supply of Air Cool Air-Conditioning System Indoor Units with Cordless Remote, Sensor & Refnet Round Flow Cassette Unit with Panel including all Hardware fitting, Installation, Testing, Commissioning refrigerant joint, Drain pipe & Support Accessories etc. complete all as instruction of the Engineer-in-charge- 3.0 TR Cassette A.C. Brand-Daikin/Mitsubishi or equivalent. |
| 336 | Fire Fighting worksProviding, Fixing, Single Headed external yard hydrant 63 mm dia. SS-304 landing valve (ISI marked) conforming to IS-5290 (Type -A) with SS-304 blank cap & chain, cast iron wheel, complete as required and as specified. |
| 337 | Providing, Fixing, MS Hose cabinet outdoor type of size 0.750Mx 0.600Mx 0.250M made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c necessary locking arrangement suitable to accomodate 2 nos 15m long hoses, one no branch pipe, etc. and mounted on wall or with raised brick platform. The cabinet shall be painted with redcolourexternally & white internally complete in all respects for external hydrant and as specified. |
| 338 | Providing, Fixing, Single Headed internal hydrant comprising of 80 mm NB dia. flanged inlet pipewith reducer,63mm dia.outlet SS-304 landing valves (ISI marked), conforming to IS-5290 (Type A) with SS-304 blank cap and chain, cast iron wheelcomplete as required & as specified. |
| 339 | Providing, Fixing, 63 mm dia SS-304short Branch pipe with 15 / 20mm (nominal internal diameter) nozzle conforming to IS:903 suitable for instantaneous connection complete to inter-connect hose pipe, coupling etc. as required and as specified. |
| 340 | Providing, Fixing, 63mm dia., 15mtr. long RRL hose pipe (ISI Marked) with 63mm dia. male and female SS-304 couplings duly binded with GI wire, rivets etc. conforming to IS- 636 (Type-A) complete as required & as specified. |
| 341 | Providing, Fixing, First-Aid Hose Reel20mm dia. x 36.5m long (minimum length) (Thermoplastic Type as per I.S. 12585) complete withswing type drum, bracket, 25mm dia. shut-off valve and 5mm SS -304nozzleconforming to IS-:884, connection with riser withMS C- class pipe, painting the MS works complete as required & as specified. |
| 342 | Providing, Fixing, of standard fireman\"s axe as per IS:926 with heavy dutyinsulated rubber handle. |
| 343 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 344 | Providing, Fixing, inlet breechning in CI Body having4 way Gun-metal Fire Brigade inlet connection comprising of4 nos. 63mm dia. male instantaneous inlet couplingswith PVC cap and GIchain as required for 150mm dia. flanged MS pipe connection conforming to IS- 904 complete (to be connected to static tank) as required and as specified. |
| 345 | Providing, Fixing, following sizes of \"C\" Class heavy duty Mild Steel pipes conforming to IS-1239 upto 150mm dia. &IS-3589 for sizes greater than 150mm dia, including cutting, welding, nut-bolts, gasket, fitting viz. bends, tees, reducers, crosses, flanges etc. and fixing the pipes onwall / ceiling / beam / floor with suitable MS clamps / structural supports/PCC block and painting two coats of red oxide primer and two coats of synthetic enamel paint of approved shadecomplete as required and as specified. ( For all applications above ground level) |
| 346 | 200 mm dia. (6 mm thick) |
| 347 | 150 mm dia. |
| 348 | 100 mm dia. |
| 349 | 80 mm dia. |
| 350 | 65 mm dia. |
| 351 | 40 mm dia. |
| 352 | 32 mm dia. |
| 353 | 25 mm dia. |
| 354 | Providing & fixing Butterfly valve with C.I. body & disc, stainlesssteel/carbon steel shaft, Hand lever operated, PN 1.6 rating, conforming to IS:13095/BS:5155. |
| 355 | 150mm dia. |
| 356 | 100 mm dia. |
| 357 | 80 mm dia. |
| 358 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : |
| 359 | 200mm dia. |
| 360 | Providing, Fixing, non return valve Rating PN 1.6 Dual Plate type, conforming to API-594 with C.I. body, SS Disc, SS stem, EPDM seal, complete with companion flanges, bolts, nuts, washers & inserted rubber gasket complete as required and as specified. |
| 361 | 200 mm nominal bore |
| 362 | 150 mmnominal bore |
| 363 | 100 mmnominal bore |
| 364 | 80 mmnominal bore |
| 365 | Providing, Fixing, lever operated brass/ bronze ballvalveof full flow with SS Balls having minimum working pressure of 16 Kg / Cm2 approved quality (screwed end) : |
| 366 | 50mm nominal bore. |
| 367 | 40 mm nominal bore |
| 368 | 25 mm nominal bore |
| 369 | Providing, Fixing, 25mm dia. gunmetal air release valve PN 1.6 with all fittings and forged ball valve on header complete as required and as specified. |
| 370 | Providing, Fixing, Y Typestrainer, 200mm dia, of Ductile CI Body flanged ends with stainless steel strainer having 3 mm perforation , perforation area 1 :4 Pressure ratingPN 1.6. Complete as required. |
| 371 | Providing, Fixing, pressure switch, Standard Type, (for operation at 0-15 Kg./sqcm) with required fittings and accessories complete. |
| 372 | Providing, Fixing, reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 16 kg/cm2 pressure, as per specification of the manufacturers complete as required and as specified. |
| 373 | 200mm dia. |
| 374 | Air pressure vessel for Fire PumpProvidingand fixing double flanged vertical air vessel fabricated from 10mm thick M.S. plate with dished ends fabricated from 10mm M.S. plate, outside painted with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauges and all other required accessories to operate commonly main fire pump, sprinkler pump, Diesel Fire pumps and Jockey pumps atdropof pressure automatically at required pressure setting complete as required and as specified.Recommended dia.: 450mmHeight of shell : 2000mmWorking pressure:16 Kg/Sq.cm Test Pressure : 25 Kg/Sq.cm |
| 375 | Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and MS top cover in 50 x 50 mm MS angle frame , lifting handle , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 376 | Providing, Fixing, installation control valve (Sprinkler Alarm Valve) of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases ,strainer, pressure switch, cock valve complete with drain valve and bypass, test control box,ball valves, MS pipe of required size, flanges, orifice plate, fittings, gasket etc.suitable for 150 mm diameter pipe size completeas required as specified. |
| 377 | Providing and fixing UL Listed electrically operated water flow switches with threaded connection for indicating water flow in sprinkler branch line suitable for vertical/horizontal mounting as per site requirement complete as required and as specifed for pipe sizes of 80 to 150 mm Dia. |
| 378 | Providing, Fixing,15 mm dia.GM sprinkler head with standard responseQuartzoid Bulb capable to operate at 68 degree C complete with all accessories as required and as specified. (UL Listed) |
| 379 | Pendant type in chrome finish (StandardCoverage) |
| 380 | Upright type in chrome finish (StandardCoverage) |
| 381 | Providing & Fixing chrome finished Rosette plate with twin - piece recessed escutcheon plate, UL Listed / FM Approved, suitablefor 15 mm size sprinklers. |
| 382 | Providing, Fixing, addressable monitor module with existing flow to monitor the water flow in sprinkler system, operating onlooped power and install as per site requirement complete as required and as specified. |
| 383 | CO2 type 4.5 kg capacity as per IS- 15683 |
| 384 | 6 Kg capacity ABC Dry Powder type |
| 385 | Providing and Fixing 3 Nos. G.I. sand buckets painted \"Red Color\" complete with G.I. stand duly painted \"Red Color\" of suitable size to hang 3 Buckets at a time as per required specifications. |
| 386 | Common bed plate of fabricated MS channel / ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable cement concrete foundation duly plastered including foundation bolts, washers as required. |
| 387 | 180 LPM 35 M Head |
| 388 | Providing all materials, labour, T&P for laying/fixing of following dia CPVCpipesS.D.R-11 as perIS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME |
| 389 | 20mm dia |
| 390 | 25mm dia |
| 391 | 32mm dia |
| 392 | 40mm dia |
| 393 | 50mm dia |
| 394 | Providing all materials, labour, T&P for laying/fixing of following dia uPVCpipesas per IS-4985 with ISI mark including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screwin all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge.Make: ASTRAL/ASHRIVAD/AJAYA/SUPREME |
| 395 | 50mm dia |
| 396 | Providing all materials, labour, T&P for fitting & fixing of following water supply fittings confirming to IS-15778 with ISI mark as per ASTM D-2846 & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME |
| 397 | 25mm dia CPVC ball valve |
| 398 | 32mm dia CPVC ball valve |
| 399 | 40mm dia CPVC ball valve |
| 400 | Providing all materials labour, T&P for making grooves in bricks/stonemasonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification &direction ofEIC. |
| 401 | Providing all labour,T&P for cutting holes in bricks or stone masonry wall for takingpipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction ofEngineer-in-charge. |
| 402 | For pipe to pass in 125mm to 250mm thick wall |
| 403 | Providingall materials, labour, T&P for fitting and fixing white glazed vitreous china wall mounted water closet (European pattern) with seat cover (solid) & fixing of PVC concealed cistern of approved make in all floor including supply & fixing of rack bolt with CED plated stud etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Jaquar ARS-WHT-39751S/P or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA |
| 404 | 520mmx360mmx410mm size European wall mounted water closet with 460mmx450mmx80mm size concealed cistern |
| 405 | Providingall materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) \"P\" or \"S\" type with cistern & seat cover, wash hand basin of size 460mmx360mm with one pair basin bolt, one no. hinged rail 760mm long & 4 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Hindware Matrix Set or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA |
| 406 | Supply all materials and labour for fitting and fixing offollowing size white glazedvitreous chinawash hand basin with half pedestal of approved make as per IS-2556 with ISI mark in all floor with supply & fixing of basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages including testing with all taxes, duties, transportation etc. all complete as per specification & direction of EIC. |
| 407 | Under counter BasinJaquar CNS-WHT-701 or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA |
| 408 | Supply all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china flat back, lipped front urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from existing water supply pipe line & testing the same with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. Jaquar URS-WHT-13257 or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA |
| 409 | 390mmx375mmx590mm size flat back large standing urinal |
| 410 | Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 5mm thick mounted on 4mm thick AC sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.Make-Saint gobain |
| 411 | 600mm x 450mm size |
| 412 | Providing all materials, labour,T&P and fittings and fixing of different water supply(CP onBrass) fitting (Quarter Turn) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.Make:Jaquar/Hindware/Cera |
| 413 | 15mm dia Short Body Bibcock with wall flange Jaquar-KUP-35037PM |
| 414 | 15mm dia Angle Stop cock with wall flange Jaquar-KUP-35053PM |
| 415 | 15mm dia Pillar cock Jaquar-KUP-35001PM |
| 416 | Concealed Stop cock Jaquar-KUP-35053PM |
| 417 | C.P. Soap Dish HolderJaquar-AKP-35731P |
| 418 | Towel Ring Square with round flangeJaquar-AKP-35721P |
| 419 | 32mm dia C.P.waste (Half Threaded) Jaquar-ALD-729 |
| 420 | C.P. Robe Hook Jaquar-AKP-35761P |
| 421 | Health Faucet Jaquar-ALD-573 |
| 422 | Supply all materials, labour, T&P, fitting and fixing of uPVC SWR (Ringfit) Pipes (Type-A) of approved make confirming to IS-13592/1992 with ISI mark, both below & above ground level or fixing on wall surface in all floors including excavation of earth work in all kinds of soil & necessary back filling or required scaffolding with all taxes, duties, transportation including testing etc. all complete as per specification & direction of the EIC.Make:ASTRAL/ASHRIVAD/AJAYA/ SUPREME |
| 423 | 110mm dia pipe |
| 424 | 75mm dia pipe |
| 425 | Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approvedmake confirming to IS-14735 with ISI mark with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME |
| 426 | 125mm x110mm P-Trap with lip ring |
| 427 | 110mmx110mm \"P\" Trap |
| 428 | 110mmx75mm Nahani Trap |
| 429 | 110mm Multifloor Trap |
| 430 | 110mmx87.5º Plane bend |
| 431 | 110mmx87.5º door bend |
| 432 | 110mmx45º Plane Bend |
| 433 | 110mm Single Tee with Door |
| 434 | 110mm Double Tee with Door |
| 435 | 110mm dia single \"Y\" |
| 436 | 110mm WC connector/Bend with lip ring |
| 437 | 110x75mm Reducer |
| 438 | 110mm dia Vent cowl |
| 439 | PVC Clamp Suitable for 110mmdia pipe |
| 440 | Providing all materials, labour, T&P for fitting and fixing of following size of 12mm thick toughened glass for urinal partition of approved make in all floorwith edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge. |
| 441 | Toughened glass partition of Size-1200mm ht. x 600mm width for Urinal Partition |
| 442 | Providing all materials, labour & T&P for fitting and fixing of white glazed vitreous china water closet Indian Pan of approved make as per IS-2556 with ISI mark fixing on the floor with 32mm PVC Long flush bend andcement concrete 1:2:4 for fitting the closet etc. & PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark in all floor and providing of necessary PVC wall plug, screws and 15mm dia PVC water connecting pipe with union at both end including testing etc. all respect in all floors including cost, conveyance and taxes of all materials etc. all complete as per specification and as per direction of EIC.Make: HINDWARE/CERA/JAQUAR |
| 443 | Squirting Pan (450mmx350mm) with flushing cistern of Jaquar Essco-ECS-WHT-451LE & WHC-WHT-184T |
| 444 | Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/ sqcm in CM 1:6 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size, earth workexcavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earthlevelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royalty, cost, conveyance etc. all complete as per specification & direction of EIC. |
| 445 | Inner size 300mmx300mmx450mm depth Gully Trap chamber |
| 446 | Providing, fitting, fixing including testing & commissioning of following capacity polyethylene moulded water storage cylindrical tank with lid & locking arrangement as per IS-12701/1996 with ISI mark including cutting holes of required size & shape. Providing, fitting and fixing of CPVC water tank connector / Adaptor with jam nut etc. for filling, delivery, overflow & wash out arrangements, including hoisting upto a heightof 10 mtr. above the ground level & placing the tank of required position including construction of brick masonry pedestal up to 450mm ht. from roofwith RCC(M-20) base slab, beam of approved design & 125mm thick brick masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm C.P. 1:4 over brick work etc. all complete as per specification & direction of EIC. (Make-Sintex) |
| 447 | 2000 Ltr. Capacity |
| 448 | Providing all materials required for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:6), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 100mm thick, 12mm thick cement plaster 1:4 & 1:6 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. |
| 449 | Inner size 750mm x 750mm x 500mm depth |
| 450 | Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. |
| 451 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
| 452 | Providing all materials,labour,T&P for construction of Cement Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips as per approved design & drawing for uPVC pipe. The cost inclusive of all taxes, royality, hire & running charges of all machineries, Transportation charges with all consumables etc. all complete as per specification & direction of EIC. |
| 453 | For 160mm dia pipe:- |
| 454 | For 110mm dia pipe:- |
| 455 | Providing all materials, labour, T&P and laying of uPVC in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) includingall taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately). |
| 456 | For 160mm dia pipe:- |
| 457 | For 110mm dia pipe:- |
| 458 | Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed). |
| 459 | PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling thefoundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame (SFRC heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC. |
| 460 | Manhole chamber of Inner size 800mmx900mmx 900mm depth. |
| 461 | Extra for every additional depth of 0.10mtr. or part there of manhole size 800mmx900mm from 900mm depth upto 1500mm depth. |
| 462 | Labour for drilling a perfectly verticalbore hole for a specified dia for a specifieddepth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 150mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well). |
| 463 | Labour for drilling of150mm dia bore from \"0\" mtr. to \"100\" mtr. |
| 464 | Providing & lowering the following size PVC pipes (ASTM) with or without slottedpipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC. |
| 465 | Lowering of 150mm (6\"\") dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth. |
| 466 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment, labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC. |
| 467 | Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge. |
| 468 | Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. |
| 469 | Outer size 1400mm x 1400mm x 1200mm ht. chambers |
| 470 | Supplying submerssible pump with squirrel cage introduction type submerssible type submerssible electric motor to run on three phase or one phase line voltage ranging from 320volt to 450volt confirming to IS 8034-2002 with following specifications2HP 3Phase 3Stage head range 30-54 meters discharge 155 to 110 LPM with outlet dia of 32mm |
| 471 | DOL Control Panel (As required) |
| 472 | 2.50Sqm Cable(As required) |
| 473 | 32mm di steel short piece (As required) |
| 474 | Steel rope with cover (As required) |
| 475 | Well Cap(As required) |
| 476 | 50mm size C.I. Bracket (As required) |
| 477 | 20mm dia Rigid uPVC pipes. (As required) |
| 478 | Supply, Installation, Testing and Commissioning of10 Passenger elevator having following facilities:Car walls finish in Stainless Steel Hairline Ceiling type \"Line\" with LED lighting, Car doors finish in Stainless Steel Hairline, Stylish,touch sensitive glass panel, Door open/close and alarm buttons, Visual call confirmation, Car Position Indicator, Pre-announcing arrows for collective controls 16 Segment display, Fully Automatic Landing doors in Stainless steel Hairline finish, Close loop control system, Self diagnostic control, 2 Hours Fire rated landing doors, Overload detection, Automatic evacuation to nearest floor (ARD,) Light curtain on Car entrance, Alarm, horn, Handrail in stainless steel finish on rear wall, Auto Fan Off, Auto Light Off, and other requirements as per indian standard code for machine room less lifts or as directed by Engineer-in-charge.Model as or approved equivalent to Schindler 5300IN Elevator 00100Elevator ( 4 stops ) of each floor height upto 3.60mtr. |
AI Tender Summary
Tender Timeline
Sep 08, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender