Relaying Bt Road To Periyar Bus Stand Service Road In Ward No78. Relaying Bt Road To Periyar Bus Stand Service Road In Ward No78.
Tender Value
35.28 Lakhs
Estimated cost
Bid Submission
16 Sep 2021
0 days left
EMD
35280
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mdu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Relaying Bt Road To Periyar Bus Stand Service Road In Ward No78. Relaying Bt Road To Periyar Bus Stand Service Road In Ward No78.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring , struting and baling out water wherever necessary etc., complete. |
| 2 | Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply Pipes. The Rate inclusive of all charges such as Earth work and remove the same 2Km away from the site etc, complete as per standard specifications. |
| 3 | Providing and laying compacting wet mix macadam with clean crushedgraded aggregate and granular aggregate and granular materials and finished in accordance with the requirements of the specification and thickness as per approval plan or as directed by the engineer. |
| 4 | Providing and laying prime coat of 7 kgs/10 sqm over the WMM surface treated with Primer using 7 kgs of bituminous Emulsion for 10 square meters area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev V Specifications |
| 5 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications |
| 6 | Providing and laying 50mm Consolidated thick dense Bituminous Macadam using0.24cumof 26.50- 13.20mm 0.25 cum of 13.20-2.36mm and0.23cum of 2.36mm & below and with 53.20kgs of VG30/VG40of bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required tempearture in central hot mix plant 20-30 ton capacity , Conveying the mix by tipper trucks to work site spreading the mix to uniformthickness of 50mm withpaver to the specified grades and cross sections andcompacted by vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hirechargesfor 20 -30 t CMP with bitmen boiler, tipper trucks, Paver finisher / 9m Paver Finisher Vibratory / Pheumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc.,complete as per specifications.using CMP as per Clause 505 MORTH Rev-5 |
| 7 | Providing and laying Bituminous concrete to 30mm thick 40mm tk using 0.13cumof 19.00mm to 9.50mm ,0.17 cum of 9.50 - 2.36mm and 0.26 cum of 2.36 mm and below with 50.30kgs of VG30/VG40bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required tempearture in central hot mix plant20-30 ton capacity , Conveying the mix by tipper trucks to Paversite, spreading the mix to uniform thickness of 40 mm with mechanical paver to the specified grades and cross section andConsolidated by 8-10 tonnevibratory / Pneumatic Roller to the required density etc., including labour for attending topaver to site etc., including hire charges and fuel charges for 20 -30 t CMP with bitumen boiler, tipper trucks, Paver finisher / 9m Paver Finisher, Vibratory / Pheumatic rollers and all other tools and plant required including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 507 MORTH Rev-5 . |
| 8 | Providing and Laying of Hot Applied thermo plastic compound 2.50 mm tk including of 2.50mm exchanging of surface applied glass beads as per IRC :35 the finished surface to level uniform and free from sticks and hole etc., complete. |
| 9 | Supplying and erecting shuttering with necessary supports for plain surface such as plinth beam and lintel sides with all cross braings etc., complete. |
| 10 | Plain cement concrete 1:2:4 (One cement , two sand and four aggregates) Using 20mm Machine Crushed Stone Jelly for all RCC Items of work including vibrating charges and curing etc., complete. |
| 11 | Providing RCC Pre Cost slab 100mm tk using cement concrete 1:2:4 (one cement two sand and four aggregates) using 20mm machine crushed stone jelly . Excluding the cost of reinforcement grill in position but including the cost of moulding , curing , finishing etc., complete. |
| 12 | Supplying fabricating and placing in position of (MS grills) for reinforced rate including cost of steel for all works. The rate to include cost of binding wire also. |
| 13 | Add : GST 12 % |
AI Tender Summary
Tender Timeline
Sep 07, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender