Patch Repair Work At Sub Div Iv Of Division I Area (Arc) Civil Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
3500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Patch Repair Work At Sub Div Iv Of Division I Area (Arc) Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying and spreading of granular sub-base by providing coarse graded Material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRTH Specification : clause No. 401.Grading-III |
| 2 | Providing, laying, spreading and compacting crushed graded stone aggregate as per Table 400-10 & 400.11 to Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift |
| 3 | Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS:8887 & manufacturer’s specifications @6 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specifiedrates and temperatures (including cleaning of road surface) as per MoRTH specification : Cl. 502, 112 |
| 4 | Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS:8887 & manufacturer’s specifications @0.2 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112. |
| 5 | Providing and laying Bituminous Macadam on prepared surface with specified graded crushed aggregates as per Table 500-7, Grading-2, for base/binding course including loading of aggregates with F.E. loader and heating & mixing of stone aggregate and bitumen (including cost of anti-stripping compound, wherever required) in hot mix plant (40-60 TPH), transporting the mixed Material in tipper to paver (sensor as per clause 504.3.5), and laying mixed Material with paver finisher to the required level and grade, rolling by power roller and vibratory compactor as per Cl. 501.6 & 501.7 to achieve the desired density (approved by the department) excluding cost of primer/tack coat. [MoRTH Specification : Clause 504, 112]. with all lead & lift 50/75mm compacted thickness with 3.3% bitumen VG30 grade |
| 6 | Providing and laying 20mm thick Mix Seal Surfacing on a prepared surface in a single course composed of specified close graded crushed stone aggregates (as per table 500-19) premixed with bituminous binder(including cost of anti-stripping compound, wherever required). In a Hot Mix Plant 40-60 TPH with F.E. loader, laying with paver finisher, transporting the mixed Material by tipper and rolling with power roller 8-10 tonne, to achieve desired density approved by the department, but excluding cost of tack coat with all lead & lift (MoRTH specification : clause 508).Type “A” (22 kg binder per 10 sqm) bitumen VG30 grade. |
| 7 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 8 | Filling of pot holes and patch repairs with Built up Spray Grout in two layers with 53-22.4 mm size of aggregates upto 75mm depth and removal of all failed Material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous Material using bitumen VG10 grade as per clause 506 compacting with 8-10 tonne power roller, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 including cost of Material, fuel T&P etc. complete. (MoRTH specification : Clause 503, 506 & 3004.2) |
| 9 | Filling pot-holes and patch repairs with open-graded premix surfacing, 20mm thick compacted with bitumen binder VG10 @14.60 kg/10 sqm and aggregate in Hot Mix Plant, transporting the mixed Material with tipper and laying manually to the required level and grade, rolling with power roller, 8-10 tonne, removal of all failed Material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot-holes with hot bituminous Material as per Clause 511, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 including cost of tack coat and including cost of seal coat type B with lead for mix of Material 1 km. (MoRTH specification : Clause 3004.2) |
AI Tender Summary
Tender Timeline
Sep 06, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender