Construction Of Sdo Civil Complex At Indri Distt Karnal ( Pdg, Cctv, Epabx, Lan, Fire Alram System, Audio Video Etc ) . Construction Of Sdo Civil Complex At Indri Distt Karnal ( Pdg, Cctv, Epabx, Lan, Fire Alram System, Audio V
Tender Value
55.29 Lakhs
Estimated cost
Bid Submission
12 Oct 2021
0 days left
EMD
1.10 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karnal → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sdo Civil Complex At Indri Distt Karnal ( Pdg, Cctv, Epabx, Lan, Fire Alram System, Audio Video Etc ) . Construction Of Sdo Civil Complex At Indri Distt Karnal ( Pdg, Cctv, Epabx, Lan, Fire Alram System, Audio Video Etc ) .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Sep-2021 | Date extend | Date | 12-Oct-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | CCTV SYSTEMSITC ofDome Camera lmage device/ Sensor - 1/3\" Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel(1920 x 1080) or better, Frame rate Up to 30 fps or better, Lens Type - 3 to 9 mm auto varifocal lens Motorized, IR Light & Distance - Ir Range upto 30 mtrs or better, Signal to Noise Raio - >50db , Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better, Day Night - Auto Day/Night with switchable IR cut filter, Video Compression - H.265,H.264,M-JPEG , Camera should have Multiple Streaming- Min. Triple, Storage - SD Card slot should be expandable up to 128 GB, System Compatibitity - ONVlF Profite S&G, Privacy Masking - Minimum 4 Privacy zones or higher, Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS, Additional Features, Noise Reduction - Digitat Noise Reduction on/off., WDR -120dB WDR, Alarm Input/Output - 1 Alarm Input, 1 ALarm OutPut, Audio Input/Output - 1 audio input/1 audio outPut, Environment, Operating Environment – lndoor/ Outdoor, Operating Temperature -0C to 50 c, lngress protection & vandaI resident standards - lP67or better and IK10 or better, Certificates: UL, FCC, EN Approved makes :Axis / Bosch / Honeywell/ Pelco. |
| 2 | SITC of Bullet Camera lmage device/ Sensor - 1/3\" Progressive Scan CCD / Progressive Scan CMOS or Better, Resolution - 2 Megapixel(1920 x 1080) or better, Frame rate Up to 50 fps or better, Lens Type - 3 to 9 mm auto varifocal lens Motorized, IR Light & Distance - Ir Range upto 30 mtrs or better, Signal to Noise Raio - >50db, Minimum lllumination - 0.3Lx Color; lR LED ON 0 .0 Lux or better, Day Night - Auto Day/Night with switchable IR cut filter, Video Compression - H.265,H.264,M-JPEG, Camera should have Multiple Streaming- Min. Triple, Storage - SD Card slot should be expandable up to 128 GB, System Compatibitity - ONVlF Profite S&G, Privacy Masking - Minimum 4 Privacy zones or higher, Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS, Additional Features, Noise Reduction - Digitat Noise Reduction on/off., WDR -120dB WDR, Alarm Input/Output - 1 Alarm Input, 1 ALarm OutPut, Audio Input/Output - 1 audio input/1 audio outPut, Environment, Operating Environment – lndoor/ Outdoor, Operating Temperature -0C to 50 c, lngress protection & vandaI resident standards - lP67, Certificates: UL, FCC, EN, Approved makes :Axis / Bosch / Honeywell/ Pelco. |
| 3 | SITC of IP IR PTZ Dome Camera PoE Enabled (High Definition)lmage device/Sensor - 1/3\" Progressive Scan CCD/ Progressive scan CMOS or better, Resotution - 2 Megapixel, 1080p (1920x1080) or better, Optical Zoom 30X & Digital Zoom: 12X, lR Light & Distance - lR range up to 150 Mtrs. Or better, Signal to Noise Ratio - >_50 dB (AGC OFF ), PAN & Tilt travel - Pan 360 endless Tilt 0 to -90 (Auto Flip), Minimum lIIumination - 0.3Lx Color and B/W 0.01Lx, Day Night - Auto Day/Night with Auto lR-CUT fitter with auto switch, Encoding, Video Compression - H.265 MJPEG Triple Stream encoding, Frame Rate - Main Frame 30 FPS in all resolution or better, Audio Compression - G.711/G.726, Storage - SD Card shoutd be expandabte up to 128 GB, Protocols - lPv4/lPv6, TCP/lP, UDP, RTP,RTSP, HTTP, HTTPS, ICMP,SMTP, NTP, DHCP, UPnP, IGMP,SNMP,IEEE 802.1 X, System Compatibitity - ONVlF Profite S & G, Privacy Zone - Minimum 4 Privacy zones or higher, Additional Features, Noise Reduction-Digitat Noise Reduction on/off ., WDR -90dB True WDR or better, Alarm Input,/ Alarm Output-1 Alarm Input, 1 Alarm Output, Environment-, Operating Environment-Outdoor, Operating Temoerature- 0\"C to 50\"C, lngress protection lP66 or better., Certificates: UL, FCC, EN, Approved makes :Axis / Bosch / Honeywell/ Pelco. |
| 4 | SITC of Network Video Recorder 32 Channel Network recorder With 16 TB HD to a maximum of 32 IP cameras,The recorders can be installed with a maximum of 2 internal HDDs for video storage. Option of a 2 HDDs for storage,Max. capacity per HDD: 4 TB. 1 no. E-SATA supported. The recorderscomes with a built-in PoE+ switch as an option. 16 alarm i/p &6 relay o/p. Simultaneous 1/4/9/16 channels playback. H.265/H.264/MJPEG supported. iPhone/Android support. Maximum incoming bandwidth of 320 Mbps. Maximum recording bandwidth of 320 Mbps. 1 I/O for audio. 1 VGA & 2 HDMI outputs. CE, UL & FCC certifiedApproved makes :Axis / Bosch / Honeywell/ Pelco. |
| 5 | SITC of L2 switch with 24 x 1G Base T Port PoE+with 2 RJ45/SFP combo port and 2 x 1/10G SFP+ .The switch must be stackable upto 4 Units SFP Should be from the same OEM .Switching Capacity should be 90 Gbps or more with not less than 135 Mpps Throughput Switch should have 1GB Flash and 1GB RAM The switch must support minimum 16K MAC address entries and 4K VLAN with latency of less than < 4 µs 802.1AB, LLDP-MED, NTP, DHCPv4 and DHCPv6, ISSU, 802.1D, 802.1W, PVST+, 802.3ad/802.1AX, MVRP Same switch should work with onpremise NMS and Cloud based NMS without change in software and hardware. It should also support automation using JSON, Restful web services and MIB Static Routing for IPv4 and IPv6, Support NAC solutions from all leading vendors, 802.1x, Captive portal, SSH with PKI, TACACS+, Radius, LDAP, ACL, BYOD onboarding using all leading vendors IGMP v1, v2 and v3 snooping with 1000 Multicast groups, UDLD, MLD Snooping, SPQ and WRR, Eight hardware based queues per port, ARP, Mac address lockdown & Learned port security The switch must support Web-based Management (GUI), SSH v2, SNMP v1, v2 and v3, File upload using TFTP, FTP, SFTP or SCP over Ipv4 and Ipv6 Should support Perpetual PoE to power IoT devices during restart with support for following standards - 802.3af, 802.3at and 802.3bt Switch shall conform to following standards- UL 60950-1 or IEC 60950-1 or CSA 60950-1 or EN 60950- EN 55022, EN 55024:2010, EN61000-3-2, Class A/B or CISPR22 Class A/B or CE- IEC 62368-1:2018- Certified for EAL 2/NDPP or above Vendor to be present in Gartner Magic Quadrant 5 Years from OEM with Toll free number for support in India. Make:Cisco/Alcatel/Juniper. |
| 6 | SITC of 43\" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: Sony/Panasonic/Samsung |
| 7 | SITC of 1 KVA UPS with 1 hour backup on line with Suitables AH batteries. Make: Microtek / Luminous / APC / Elnova ) |
| 8 | SITC of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5monforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 Make Dlink/Siemon/Systimax |
| 9 | SITC of 24-port 19\" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19\" 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make (Dlink/W-BOX/Seimon) |
| 10 | SITC of CAT 6 UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certification report. Make: R&M/AMP/Molex. |
| 11 | SITC of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells |
| 12 | LAN SYSTEMSupply Installation Testing & Commissioning of 24 Port Switch Make:Cisco/Juniper/Alcatel L2 switch with 24 x 1G Base T Port PoE+with 2 RJ45/SFP combo port and 2 x 1/10G SFP+ ., The switch must be stackable upto 4 Units, SFP Should be from the same OEM, Switching Capacity should be 90 Gbps or more with not less than 135 Mpps Throughput, Switch should have 1GB Flash and 1GB RAM, The switch must support minimum 16K MAC address entries and 4K VLAN with latency of less than < 4 µs, 802.1AB, LLDP-MED, NTP, DHCPv4 and DHCPv6, ISSU, 802.1D, 802.1W, PVST+, 802.3ad/802.1AX, MVRP, Same switch should work with onpremise NMS and Cloud based NMS without change in software and hardware. It should also support automation using JSON, Restful web services and MIB, Static Routing for IPv4 and IPv6, Support NAC solutions from all leading vendors, 802.1x, Captive portal, SSH with PKI, TACACS+, Radius, LDAP, ACL, BYOD onboarding using all leading vendors, IGMP v1, v2 and v3 snooping with 1000 Multicast groups, UDLD, MLD Snooping, SPQ and WRR, Eight hardware based queues per port, ARP, Mac address lockdown & Learned port security, The switch must support Web-based Management (GUI), SSH v2, SNMP v1, v2 and v3, File upload using TFTP, FTP, SFTP or SCP over Ipv4 and Ipv6, Should support Perpetual PoE to power IoT devices during restart with support for following standards - 802.3af, 802.3at and 802.3bt, Switch shall conform to following standards- UL 60950-1 or IEC 60950-1 or CSA 60950-1 or EN 60950- EN 55022, EN 55024:2010, EN61000-3-2, Class A/B or CISPR22 Class A/B or CE,- IEC 62368-1:2018- Certified for EAL 2/NDPP or above, Vendor to be present in Gartner Magic Quadrant, 5 Years from OEM with Toll free number for support in India |
| 13 | Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make & Model: R&M/AMP/Molex. |
| 14 | Supply Installation Testing & Commissioning of 2-port with dust cover faceplate including back box and all other accessories As per specification. Make & Model: R&M/AMP/Molex. |
| 15 | Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data RackSide), As per specification. Make & Model: R&M/AMP/Molex. |
| 16 | Supply Installation Testing & Commissioning of Cat6 Patch Cords - 2Mtr -Blue ( Data Field Side), As per specification. Patch cord should have provion of lock with information outlet port.Make & Model: R&M/AMP/Molex. |
| 17 | SupplyInstallation, testing and commissioning of Indoor soft jelly filled SINGLE MODE 6 CORE - OS2 . Should be ISO.IEC 11801type OS2 and ITU-T REC G 652D. Tube Idenification :Single tube. Fibre protection (Tube) : Polybutylene Terephthalate (PBT). Water Blocking :Thixotropic Gel (Tube) and Petroleum Jelly (Interstices) with cotton poly thread protective. Core Wrapping : Polyethylene Terephthalate with cotton paper guard protection: Corrugated Steel Tape Armour (ECCS Tape). Strength Member: soft protetective periphery /Central S. Sheath :UV Stabilized Polyethylene (HDPE). Maximum. Tensile Strength-Short Term : 400Nor better. Mass (Nominal) : minimum 50 kg/kmOptical fiber cable with jelly filled 6F Loose Tube ( Unitube ) Type CSTA SM FOR SERVER ROOMto Each Network Rack Backbone connectivityAs per specification. Make & Model: R&M/AMP/Molex. |
| 18 | Supply Installation Testing & Commissioning of 12F, 1U, LC OM3, LIU Loadedwith Pigtails, Splice tray, LIU have slider channel for rack mount. It has spindle with fiber management accessories. As per specification. Make & Model: R&M/AMP/Molex. |
| 19 | SupplyInstallation, testing and commissioning of PATCH CORD LC-LC MM OS2 DUPLEX LENGTH- 2mtr. It has covered with metal outer sheath for antirodent protection.As per specification. Make & Model: R&M/AMP/Molex. |
| 20 | SITC of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make:Netrack/Comrack/D-Link |
| 21 | Supply and erection of 1000-Base SM SFP fiber module of same OEM quoted for switch |
| 22 | Splicing and testing of fiber core with digital report of OFC performance. |
| 23 | EPABX SYSTEMSupply, Erection, testing andcommissioning of e-Communication appliance for voice with following features & Specifications :- Make: - Matrix/ Alcatel/ Unify. EPABX system should be configured for: 04 Trunk Lines. 01 Pri. 8Digital Extensions. 96 Analog Extensions for analog push button telephones Expandable upto 128 Ports. System should have Core to IP Switch Welcome message with direct extensions dialing System should have DISA ( Direct inward Station Access ) & DOSA ( Direct outward Station Access) facility without consuming any port of the system. Preference would be given to the manufacturer having DSIR recognized R&D.The System shall have the inbuilt auto-attendant facility. The system should support megnato phones also. The PRI card should be software programmable for TE/NT. The system shall have multiple port interfaces such as analog. The system should have in-skin GSM card so that the multiple SIMs can be inserted on the GSM card plugged on to the PBX platform. Hence the calls on GSM mobile can be routed through this SIMs and contribute in reduction of overall telecom bill. The system shall have multiple port interfaces such as analog extension, IP Extension, GSM/3G, E&M Line, PRI/E1 and VoIP. - The System shall have at least 2 RS232 ports for SMDR/PMS/CAS Interface.- EPABX should have built-in one number of public address port and external music port. - The system shall support flexible 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all. - Routing of calls to only permissible legal networks (Logical Partitioning).Conversation recording should be possible on Analog/Digital/IP as well as Mobile SIP Smartphone (Android/ iPhone). The system shall have security dialer.i.e. EPABX system should have provision to any sensor such as Glass break sensor, fire sensor etc. shall connect directly to the system. When sensor get activated system will dial out the pre programmed number and deliver prerecorded emergency message as well as request for confirmation. - The system should support walkie talkie interface with EPABX system. |
| 24 | S/E/T/C of KTS PHONE with wide LCD display, soft keys with LED status indication navigation keys show name facility for direct dialing feature keys like: message, configration, emergency Misc. etc. Make -Alcatel/ Unify/ MATRIX |
| 25 | S/E/T/C of Push Button Telephone Desktop model with flash, Hold, Pause keys etc and Voice Mail Message indication LED , Telephone instrument make BeetleC-51 |
| 26 | Supply anderection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities. 50 Pair IDF |
| 27 | 20 Pair IDF |
| 28 | 10 Pair IDF |
| 29 | Supply and Erection of PVC conduit pipe ISI marked (Medium) on surface including cost of PVC bends, inspection box with all other material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of work.32mm dia, Make- Diplast/AKG/Polypack |
| 30 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 2 pair telephone wire |
| 31 | 20 Pair |
| 32 | Fire AlramSupply Installation Testing Commissioning of (1 loop) Micro processor based 2 wire fault tolerant, networkable type Fire Alarm / Detection Control Panel (having nos. of loops to suit minimum 20% extra over the nos. of fire detectors. The panel shall be able to give location of all fire / fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit/ 5.7’’TFT to indicate Fire / Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects. The Panel Shall be sheet Steel power coated, sealed to IP30. The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators. The Panel shall have 3 Serial Ports. The pane\l shall have a built in power supply and battery charger along with maintenance free 24 AH,2 x 12 volt SMF lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. And conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS/ as per specifications complete in all respect up to the entire satisfaction of Engineer-in –charge of work. Make: Bosch FPA 1000 / Cerberus by siements/Honeywell Morley ZXE Series. |
| 33 | Supply Installation Testing Commissioning of Analog Addressable type Active Repeater fire alarm panel with Backlit LCD Display, having controls for reset, mute, Accept, Silence alarms and self test conforming to BS5839 standards and Duly approved by EN54/UN54/VDS with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer – in Charge of work. Make: BOSCH FMR-1000-RCMD, Cerberus by Siemens ,Morley ZXRA). |
| 34 | SITC of addressable multisensor detector with a combination of optical and thermal including base, auto addressing features as required. Detectors should have 2 as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elemnets in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance wiht EFSG agreement EFSG/F/97/005. EMC safety for detector shall be 50 V/m. shall be EN54/VDS/UL certification. ((Detectors without inbuilt isolators may be considered with an additional isolator module after 20 devices) Make: Bosch FAP-440+T+FAA-440, Siemens Cerberus OH921+DB-11, Honeywell Morley HM-PTSE+B501. |
| 35 | Supply Installation Testing Commissioning of addressable Heat Detector wht fixed and rate of raise feature including mounting base with LED etc complete as required. Each detector should have 2 as per NFPA 72 style 7 wiring requirement (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to eletrmagnetic effects in accordance with EFSG agreement EFSG/F/97/005. Detector should monitor electromagnetic interfarence and report to the panel-current and average values, EMC safety for detector shall be 50 V/m. shall be EN54/VDS/U: certification. (Detectors without inbuilt isoaltors may be considered with an additional isolator module per detector. Make: Bosch FAH-440+FAA-440, Siemensr Cerberus HI921+DB-11, Honeywell Morley MI-RHSE+B501, Edwards SIGA DHI+SIGA |
| 36 | Supply Installation Testing Commissioning of UL/EN54/LPCB listed and FM approved line isloating for isolation the section of circuit in case of short in the addressable loop wiring Make: Bosch / Siemens Cerberus/ Morley. |
| 37 | SITC of intelligent analog addressable type Manual Call point having surface or flush mounting option fully compliant to EN54 having rotary decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required to complete the job in all respect upto the entire satisfaction of Engineer-in-Chage of the work. Make Siemens cerberus/ Morely / Bosch |
| 38 | SITC of addressable Loop powered hooter with strobe complete with mounting base as required conforming to BS5839 standards and duly approved by EN54/UL/VDS required complete the ob in all respect upto the entire satisfaction of Engineer - in - charge of work. Make: Bosch/ Siemens Cerberus/ Morley. |
| 39 | SITC of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink sulphate as bare chemical class 1 material PSPA fixed on 3mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener Make GLOLITE / PEARL / OMEX. |
| 40 | Supply Installation Testing Commissioning ofAddressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC. Shall beEN54/UL/VDS CertificationMakes :Bosch /Siemens Cerberus / Morley. |
| 41 | Supply Installation Testing Commissioning of Intelligent Analog Addressable Type Monitor Modules having option of RAIL or Surface Mounting with Tri Color LED status indicator with Built in Short Circuit Isolators having Visible Rotary Decade Address Switch from 01-99 dully approved to GEA GEW1-082 conforming to BS5839 Standards and Duly approved by EN54/LPCB/VDS with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. Makes: Bosch- FLM - 325 - 214, Siemens cerberus HTRI-M,Morley MI-DMMI. |
| 42 | Supply Installation Testing Commissioning of minimum 1000 Mtr. Range Kheraj / National make SIRON generator provided at the roof of the building with separate Power SITC, relay. |
| 43 | SITC of PVC unsheathed s/c stranded (ISI Marked) copper conductor cable 1100v grade in exising Pipe. Havell\"s / Polycab / Fenolex1.5sqmm fire cable single core |
| 44 | Supply and erection of Fire Extinguishers duly hang on wall with necessary hook complete in all respect. Make Make: Safex / Minimax / Cease Fire).ABC dry Powder extinguisher 6 Kg Cap |
| 45 | CO2 type 4.5kg cap |
| 46 | Supply, installation, testing & commissioning of Class D amplifier 520 watts Frequency response: 60 Hz to 15 khz (+1/3db), Inputs :XLR & phone jack , Input 1, Input 2-4, Impendence :20kO, Sensitivity : 1 V balanced , S/N >: >85 dB complete in all respect Make Honeywell/BOSCH/Henrich |
| 47 | SITC of Stylish 6-zone call station, Six zone selection keys, all-call key and momentary PTT-key for calls Selectable gain, speech filter and limiter for improved intelligibility LED indications for zone selection, fault and emergency state Voltage range 18 – 24V Nominal sensitivity 85 dB SPL (gain preset 0dB) Gain preset +6 / 0 / -15 dB Equivalent input noise level 25 dBSPLA Frequency response 100Hz – 16kHz complete in all respect Make Honeywell/BOSCH/Henrich |
| 48 | Supply, Installation, Testing & commissioning ofWall Mount/CeilingSpeaker with operation 6 Watts Make Honeywell/BOSCH/Henrich |
| 49 | Supply, Installation, Testing & commissioning of Horn Loudspeaker made with ABS, waterand dust protected to IP 65,Sound pressure level at 15W/1W - 115/103 dB (SPL), Effective frequency range 500 Hz to 5 kHz, Rated power 15W Make Honeywell/BOSCH/Henrich |
| 50 | Supply, installation, testing & commissioning of 17 U Standard rack to place all Av equipment Make Valrack, Comrack,Hive Networks |
| 51 | Wiring for PA system with the following sizes of FRLS insulated copper conductor two core 1100 volts grade cables in existing surface/recessed M.S. conduit etc. as complete as required. Make Finolex/Havel/Plaza2 x 1.5 sq.mm |
| 52 | INFROMATION DISPLAYSupply Installation Testing & Commissioning ofProfessional Display43\" Diagonal Size 43 Panel Type Edge LED BLU Resolution UHD (3840 x 2160) Brightness 500nit Contrast Ratio 4000:1 Viewing Angle(H/V) 178:178 Response Time 8ms Display Colors 1.07 Billion Color Gamut 72% Dynamic C/R MEGA AudioBuilt in Speaker(10W + 10W) INPUT Type DVI-D,HDMI 2.0X 2,USB 2.0 x 1 , Audio Input X 1 OUTPUT Type Stereo Mini Jack, HDMI X 1 Duty Cycle 24 x 7 Special featuresAnti Glare/ Haze 25%, Temperature Sensor, Pivot Display, IP5x Rating, Wireless Mirroring, 8GB internal memory Logo Should have Customized Logo when no signal is active File supportDirect viewing of PPT, Word ,PDF, Images and video from pen drive Remote Controlling of device Laptop / Desktop Should be controlled remotely by external Keyboard and mouse through display EXTERNAL CONTROL RS232C(in) thru stereo jack, RJ45 Power Consumption 110 Standby Mode Power less than 0.5W VESA Mount 200*200mm Operating Temperature 0?~ 40? Humidity 10~80%SafetyCE, FCC, Energy Star 8.0, BIS. Make: Panasonic/Samsung/Sony. |
| 53 | Supply Installation Testing & Commissioning of Digital signage media player : CPUOcta-core amlogic S912 ARM Cortex-A53, GPU/ GraphicsMali T-820 MP3 OpenGL ES 3.2,OSAndroid 6.0.1, Memory2GB DDR3, Storage32 GB,Wi Fi802.11/b/g/m with 2dB antena, Ethernet10/100 Mbps, Bluetooth 4.0, O/P PortsHDMI 2.0,USB2 USB 2.0 ports , SDSD card slot, support up to 32 GB, Resolution3840 x 2160. Make: Sony/Samsung/Panasonic. |
| 54 | Supply Installation Testing & Commissioning of MS office software for media player. |
| 55 | Supply Installation Testing & Commissioning of PC Client Intel i7 processor (for workstation) with clock speed- minimum 3.0GHz, RAM8 GB & Expandable. Window 8/10. Minimum 1TB (For Workstations)With Read & Write functions .LAN Interface 10/100 Mbps Ethernet. 2GB graphics card. Mouse Optical . USB port.Make: HP, Dell, IBM. |
| 56 | Supply Installation Testing & Commissioning of Central Server MagicInfo Premium Server software for digital signage Contant Pushing . |
| 57 | Supply Installation Testing & Commissioning of 8 port10/100/1000 non POE switch. Make: D-link/Cisco/Extreme |
| 58 | Supply & laying of 1.5 m HDMI cable. Make: Kramer/Extron/AMX |
| 59 | Supply , installation, testing and commissioning of Composite Audio Cable 14/38 multi Stranded 2 Core double insulated 3 Mtr Make:- CHETAN/ASIAN/DEEPCAB |
| 60 | SITC of 2 KVA UPS with 1 hour backup on line with Suitables AH batteries. Make: Microtek / Luminous / APC / ETON. |
AI Tender Summary
Tender Timeline
Sep 27, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 12, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender