Improvements To Ii Cross Street At Kailash Nagar And Uddayar Street At Pakkamudayanpet, Thattanchavady Constituency, Puducherry.
Tender Value
19.80 Lakhs
Estimated cost
Bid Submission
09 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thattanchavady → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvements To Ii Cross Street At Kailash Nagar And Uddayar Street At Pakkamudayanpet, Thattanchavady Constituency, Puducherry.
BOQ
| Sl. No. | Item Description |
| 1 | CODE NO:3.1Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 metres. |
| 2 | Code No. 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 3 | CODE NO: 4.1.5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 4 | CODE NO: 4.1.10Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mmnominal size) |
| 5 | CODE NO: 4.3.1Centring and shuttering including strutting, propping etc. and removal of form work for -foundations, footings, bases for columns |
| 6 | CODE NO: 10.25.1Steel work welded in built up sections/ framed work ,including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required all complete |
| 7 | CODE NO: 11.3.1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete -40mm thick with 20mm nominal size stone aggregate |
| 8 | CODE NO: 13.16.16mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 9 | CODE NO: 15.2.1Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead – nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 10 | CODE NO: 15.3Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead |
| 11 | CODE NO:15.7.4Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar |
| 12 | CODE NO: 30.37Desilting the canal by removing silt, slush and debries from the bed of the drainremoving the grass , buses etc., complete in uhygenic andfoul condition including disposal of the same within an average lead of 1KM without polluting the environment by mechanical means |
| 13 | CODE NO: 3.14Scarifying the existing granular road surface to a depth of 50mm and disposal of scarifiedmaterial within all lifts and leads upto 1000 metres - by manual means. |
| 14 | CODE NO: 3.15Scarifying the existing bituminous surfaceto a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metres - by mechanical means. |
| 15 | CODE NO:5.5Providing, laying and rolling of built-up spraygrout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer and with key aggregates placed on top of the second layer to serve as a base conforming to the line, grades and cross-section specified ,the compacted layer thickness being 75mm. (As per MoRTH specification, 4th Revision) |
| 16 | CODE NO: 6.1.MoCleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification. |
| 17 | CODE NO: 6.2.MoCleaning of the existing black topped surfaces with brooms, soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. As per clause no 503.3.1 of MOST specification. |
| 18 | CODE No:6.5E.1.MoProviding and applying tackcoat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on black topped surface bitumen @ 5kg/10sqm. |
| 19 | CODE NO: 6.5F.1.MoProviding and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm. |
| 20 | CODE NO: 6.11B.MoProviding and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification. |
| 21 | CODE NO: 6.17.MoProviding and applying premixed seal coat type `B\" comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix plant, carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification. |
AI Tender Summary
Tender Timeline
Sep 03, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender