Supply Of Procurement Of Tool Cabinets And Tools.Procurement Of Tool Cabinets And Tools., Roll Cart For Small Material Handling:- Service Cart, 2 Shelves With Locking Drawer, Red, Service Cart Overall Dimensions, Width: 30, Depth: 17, Height: 36.7 / 32, €¢ High Gloss Powder Coat Paint Is Scratch & Chemical Resistant €¢ Storage Drawers For Frequently Used Tools €¢ Heavy Duty Undercarriage To Help Support Bottom Tray Load €¢ 18 Gauge Heavy Duty Steel €¢ 4 X 1 Swivel Casters , Tool Cabinet With Top Chest:- 54 Wide X 18 Deep 13-Drawer Roll Cabinet, Designed For Use In Commercial Applications. Equipped With Ball Bearing Slides, Overall Dimensions: Width: 54, Depth: 18.3 / 4, Height: 40.1 / 4, Capacity: 18781 Cu.In. 54 Wide X 18 Deep 9-Drawer Top Chest, Overall Dimensions: Width: 54, Depth: 18.3 / 4, Height: 22.1 / 4, Capacity: 12537 Cu.In. , Torque Tester:- Electronic, 60-600 Ft-Lb, 3 / 4 Drive, €¢ Designed To Be A Sturdy, Low-Cost Tester, These Electronic Torque Testers Can Be Placed On The Wall In The Factory Or On A Bench To Allow Operators To Test Torque Wrenches Or Power Tools Without Having To Leave Their Station €¢ Integral Transducer And Sturdy Housing Allow Mounting In Virtually Any Position €¢ Integral Transducer: Full Bridge Strain Gauge, 350 Ohms, 1500 µe, 3Mv / V F.S., 3.75V Excitation €¢ Unique Neck Design Allows Operator To See Display When Testing Long Torque Wrenches €¢ Accuracy: ±0.5% Of Reading ± 1 Count In The Least Significant Digit ( 10-100% Of Full Range ) At 25 ° C €¢ Display Accuracy: 4 Digits, 9, 999 Counts €¢ Stability: +0.044% Per C €¢ Track And Peak Modes €¢ Can Be Used With Non- Impacting Power Tools ( Joint Rate Simulators Required ) €¢ Dual Scale ( English / Nm Or English / Dnm ) €¢ Auto / Manual Display Reset €¢ Reads Bi-Directional ( Clockwise And Counterclockwise ) €¢ Uses Rechargeable Nicad Batteries €¢ All Testers Include Charger ( S18005027 ) And Storage Case ( Pb1ett ) , Precision Screwdriver Set:- Precision Screwdriver Set, 24 Pcs, For Slotted, Phillips, Pozidriv, Tor X And Hexagon Head Screws, In Plastic Case With Hanging Hole, Set Includes: Flat Tip 1.0X50, 1.2X50, 1.5X50, 1.8X50, 2.0X50, 3.0X50, 3.5X75, 4X75 Mm, Phillips Tip: Ph00x50, Ph0x50, Ph1x75 Mm, Pozidriv Tip: Pz0x50, Pz1x75 Mm, Torx Tip : T6x50, T7x50, T8x50, T9x50, T10x50, T15x75, T20x75 Mm, Hex Tip: H1.5X50, H2x50, H2.5X50, H3x75 Mm.
