|
| 1 | Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out hard/dense soil all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth in foundation etc and getting out in hard/dense soil |
| 3 | M& L PCC type D-21 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete. |
| 4 | Returning, filling incl spreading, levlling, watering and well ramming in each layer n.exc 25 cm in soft/loose soil |
| 5 | Removing excavated material n.exc. 50 m and deposited were directed at a level n.exc.1.5 m above the starting point |
| 6 | Precast cememt concrete type C1 1:3:6 using 20mm graded aggregate, block masonarywith solid blocks exc. 10cm in width and setting in cement mortar (1:4) complete |
| 7 | M&L hardcore of broken stone or boulders of guage n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 8 | Earth filling in floors including spreading, levelling and ramming with watering as required in layers n.exc 25cm thick. |
| 9 | M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of floors |
| 10 | M&L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes cement plaster 1:6 |
| 11 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 12 | M&L 9mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with scres to timber frame work as in ceiling. |
| 13 | M&L second class soft wood , plain fillets, square or rectangular in setion of areaexc 13 and n exc 25 Sqcm, clean sawn, secured with nails. |
| 14 | M&L PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection/Paving 75mm thick, finished even and smooth w/o using extra cement. |
| 15 | M&L rendering 15mm thick onconcrete surfacesin cement mortor 1:4 is to be finished even and smooth(without using extra cement) |
| 16 | M & L prepation of new surfaces of walls and applying two coats of Cement base paint over a coat of alkali resistant primer. |
| 17 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 |
| 18 | M & L prepation of new surfaces of walls and applying two coats of distemperover a coat of primer and putty |
| 19 | S&F plain Galvanised Mild steel sheet 0.80mm thick as in ridges, hips and valley gutters with grade of zinc coating 275 gm/Sqm. |
| 20 | M & L mild steel TMTbars 10mm and over in dia,cut to length bent to shape required,including cracking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 21 | All as per item No 20 here-in-before but 6mm to 8mm dia. |
| 22 | S&F 2nd class soft wood (KAIL), Plain, solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied & fixed as specified &directed. |
| 23 | S&F glazed and skelton shutters open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc 30mm thick 2nd class soft wood (KAIL). |
| 24 | S&F 35 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels)with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat. |
| 25 | S&F butt hinges medium weight cold rolled mild steel 100mm long |
| 26 | S&F butt hinges medium weight cold rolled mild steel75mm long |
| 27 | S&F 300 mmaluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fgixing bolts and sliding bolts of extruded sections or cast aluminium allow and fixed sliding door bolts, plate type, stove enemalled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate |
| 28 | S&F aluminium anodised barrel tower bolt of extruded section 200mm long. |
| 29 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long. |
| 30 | S&F extruded aluminium alloy handle fabricated type anodised 150mm long. |
| 31 | S&F extruded aluminium alloy handle fabricated type anodised 100 mm long |
| 32 | M&L prepation of new or previously untreated surfaces of wood applying two coat of Synthetic enamel paint over a coat of pink primer. |
| 33 | S&F 4 mm thick sheet glass, ordinary quality and glazing withoil putty in square n exc 0.50 sqm in each pane |
| 34 | S&F galvanised mild steel wire cloth 0.56mm normal dia of wire and average width of aperture 1.18mm. |
| 35 | M&L prepation of new or previously untreated surfaces of steel andapplying two coat of Synthetic enamel paint over a coat of red oxide primer incl preparing new zink or galvanised surface by coating mordant solutionon CGI/PGI Sheets. |
| 36 | S&F CGI sheeting 0.63mm thick with two corugation side lap fixed with coach screws and washers in roofs with coat of zinc coating 275 gm/Sqm. |
| 37 | M&L forreinforcement cement concrete (nominal mix) type B1 (1:2:4) (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing,foundation beams, plinth beams, bases for coloums etc.complete all as specified and directed by Engr-in-Charge. |
| 38 | M&Lproviding reinforcement cement concrete (nominal mix) type B1, (1:2:4) (20mm graded aggregate) in beams cantilevers, bressummers, lintels over 1.5 m span. |
| 39 | M&Lproviding reinforcement cement concrete (nominal mix) type B1, 1:2:4 (20mm graded aggregate)slabs supported on walls beams and columns in floors, roofs landings balconies canopies deck slabs all as specifiedand directed. |
| 40 | M&L for reinforcement cement concrete (nominal mix) type B1 (1:2:4) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F Rolled mild steel Gde Fe-290 (Gde E-165) as in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified |
| 42 | S&F Rolled mild steel Gde Fe-290 (gde E-165) asin Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. |
| 43 | M&L Non skid Ceramic colouredtiles 7 to 8mm thickarea of each tilesexc 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 44 | M&L for screed or bedding layer 15 mm thick in cement mortar 1:6 finished even and fair on floors for laying floor finishes. |
| 45 | M&L 10mm thick, rendering in cement mortar (1:4) in backing coat plaster for skirting/dado. |
| 46 | M&L for Glazed coloured ceramic tiles in vertical surface 300x450mmx 7mmthick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed |
| 47 | Form work to soffits of suspended slab such as roof slabs,floor slabs,landings and similar work;not exceeding 200 mm thick(Horizontal or sloping)Rough finished surface of Concrete |
| 48 | Form work to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc. |
| 49 | Form work to sides of pillers posts struts piers coloums and stanchions etc. |
| 50 | Form work to sidesof conrete foundation footings bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work etc. |
| 51 | S & F steel water tubing 20 mm dia medium grade galvanised with all fittings and fixtures complete to wall and ceiling or laid in floor. |
| 52 | S&F rotational moulded polytheline water storage tank 1000 Ltrs capacity (cylinercial/vertical with closed top) hoisted and fixed in position. |
| 53 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron ipe and fixed of 20mm bore dia as in repairs. |
| 54 | S&F tubing galvanised iron medium grade with all fittings floors or fixed to walls or ceiling, in any length, bore of pipe 15mm |
| 55 | S & F bib tap 15 mm bore chromium plated fancy type copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule. |
| 56 | S & F stop Valve of PTMT any colour high pressure screwed for iron pipe and fixed ( minimum weight 15mm-90gms) 15mm bore . |
| 57 | M&L 100 mm bore cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 58 | PVC (SWR) pipes110mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors |
| 59 | S&F 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door all as specified and directed. |
| 60 | M & L Granite ( of any type) tiles 20mm thickmachine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing complete. |
| 61 | S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 160 mm bowl size 410 x 330 mm |
| 62 | S&F hold fasts clamps, Angle cleats and similar small articles conforming to Fe-290 Gde E-165 |
| 63 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 64 | S&F MS bolts 5 to 10mm dia of neck (machine made) with hexagonal or square heads at one end screwed the other of screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15 and not exc 22.50 cm long. |
| 65 | S&F 2nd class soft wood 35mm thick glazed and skeleton for door shutters open rebated and prepared to receive gauged, edges of framing plain, chamfered or rounded divided into square sash bar any numbers of shutters as speciied in SSR Pt-I section -8 clauses 8.24 (a) fixed to chowkats. |
| 66 | M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connectedto common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer pointcontrolled by one switch, complete. |
| 67 | All as per Srl item No 66 here in before but usingcable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 68 | S & F Switch piano flush type 5 Amps, single pole one way. |
| 69 | S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Ampsflush type. |
| 70 | S & F Switch socket combination 2 in 1,5 and 15 Ampsflush type. |
| 71 | S & F Ceiling rose surface bakelite 65x50mm, two to three terminals. |
| 72 | S & F Sheet metal enclosure for DB\"s Single door,single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. |
| 73 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning. |
| 74 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning. |
| 75 | PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200x150x50 mm deep |
| 76 | S & F Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and6 Sqmm as continous earthing drawing and includingPVC casing and caping of suitable size with all acessories, complete all as specified. |
| 77 | Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep belownormal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel as shown in electrical plate No. 3 conected to earth test point as specified or indicated including testing on completion. |
| 78 | S&F1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified. |
| 79 | Supply and fixing LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 80 | Supply and fix exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers. |
| 81 | M&L for House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay.NOTE :- The unit rate shall to include for :-(a)Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall).(b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar. |
| 82 | Note : Deduction for amount of Rs 0.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract. |
