Delhi Jal Board-DJB has published Supply Installation Testing Commissioning Of Submersible Pump Sets Along With Allied E&M Equipment At Wtp Dwarka. - Supply Of Submersible Pump Set Fitted With Dynamical Balanced S.S. Impeller Mounted On S.S. Shaft With Protection Sleeve C.I. Stage Bowl. Submission Date for this Tender is 16-09-2021. Cushioning Supplies Tenders in WTP Nangloi Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply of submersible pump set fitted with dynamical balanced S.S. impeller mounted on S.S. shaft with protection sleeve C.I. stage bowls of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor suitable for operation on 3 phase, 415 volt 50 Hz AC supply. Discharge in LPM – 600 LPM on 30 Mtr Head, . Make: BS/SU/Mody/ Great India/Skope/ KBL/GGL/KSB/LUBI or any other make approved by DJB |
2 | Supply of PVC insulated, PVC sheathed submersible cable with copper conductor having three core, size 6.0mm Sq. operating voltage 1100V, Make:-Gloster/Grandley/CCI/ICC/ Universal.or any other make approved by DJB |
3 | Supply of PVC insulated, PVC sheathed, armoured cable with Aluminium conductor having four core, size 70 mm Sq. operating voltage 1100V Make:-Gloster/Grandley/CCI/ICC/ Universal.or any other make approved by DJB |
4 | Supply of80 MM Dia M.S. orifice assembly as per site requirement. Make of pipe :-Jindal/Ganesh/parkash/ ISI marked or any other make approved by DJB |
5 | Supply of MS clamp of 450 mm long 12mm thick complete with nut and bolts and washers for holding the 80mm dia pipe including bending and shaping etc. as required |
6 | Supply of NRV 80mm dia CI double flanges PN1.0 Make:-Kirloskar /IVC/ VAG or any other make approved by DJB |
7 | Supply of CIsluice valve , non rising S.S. spindle, D/F P.N 1.0 of size 80mmMake:- Kirloskar /IVC/ VAG or any other make approved by DJB |
8 | Supply of GI bend 80mm dia 90deg. Double flange. Heavy class Make: - Ganesh/ Jindal/TATA/ ISI or any other make approved by DJB |
9 | Supply of GI pipe 80mm dia size ,medium class with GI flange welded in both sides 3 Mtr long with ms strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables. make :- Jindal / TATA or any other make approved by DJB. |
10 | Supply of 6 mm size steel wire rope Usha/ISI Make to hold the pump |
11 | Supply of required off size threaded nut-bolts of good quality |
12 | Supply of MS bore cover 4 mm thick suitable for bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 80mm diahole in the center. |
13 | Supply of pressure gauge of 80 mm dia, 0-30 PSI complete with socket, bush Make:-H-Guru/Fiebig or any other make approved by DJB |
14 | Supply of G.I tail piece of 80 mm dia. , one mtr. Long size made out of jindal/Parkash/Tata/DJB approvedMake, medium class pipe complete with one end threaded and other end fitted with G.I. flange heavy and cut for submersible cable |
15 | Supply of415 Volt Distribution Board with 1 No. incomer of 125 Ampere, 4 pole MCCB and 5 Nos. outgoing feeder each of 32 Ampere 4 pole MCB "C" Curve type, made out of CRCA sheet at least 1.6 mm thick, Indoor type, duly painted with powder coating Make of insertions - L&T/BCH/ Schneider/standard/HPL or any other make approved by DJB |
16 | Supply of star delta starter panel suitable for operating 10 - 12.5 HP submersible pump made out of atleast 1.6 mm thick CRCA sheet, Indoor type duly painted with powder coating with safety features such as overload protection, Earth fault protection, short circuit protection, Single phase preventor, phase reversal, etc. complete with Power Contactor, Analog/digital voltmeter, ammeter and start/stop push buttons and indicating lights etc. complete with 24 Hour Timer.Make of insertions /switchgear:-L&T/BCH/ SCHNEIDER/ MINILEC/AE or any other make approved by DJB |
17 | Supply ofneoprene rubber sheet having 50% neoprene , 3 mm thick Make Jyoti/Worth/DJB approved |
18 | Supply of rubber mat for electrical purpose of size 1mX2mX19mm thick. Make:-Jyoti/National or any make approved by DJB |
19 | Earthling with G.I. earth pipe (medium class) 4.5 Mtr. Long, 40mm dia including accessories, and providing masonry enclose with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR 2018 item No. 5.2) |
20 | Supply of 80 mm size double flanged mechanical type flowmeter for fixing on delivery pipeline of tubewell. Make: DJB approved |
21 | Supply ofElectric Energy meter for 3 phase 415 Volts supply. Make: DJB appoved |
22 | Laying of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade between 35 sq. mm to 95 sq. mm direct in ground including excavation/ sand cushioning, protective covering and refilling the trench etc. as required. (DSR 2018 item No. 7.1) |
23 | Supply of 20 mm dia Gunmetal Valve with wheel (DSR 2018 item no. 1926) |
24 | Installation of all E&M Equipments, lowering pump set in to the bore all piping work fixing of valves and accessories executing minor civil works, connecting elctrical equipment with earthing pit, making electrical connections with cable as required I/C watch and ward & cartage, taking all safety measures all tools and tackles testing and commissioning of all E&M equipments at no load and full load conditions as per standard to the full satisfaction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail