Construction Of Road From 15 Mile To Dubha Jarba Via Phusri Indra In Block Churchu Dist-Hazaribagh C
Tender Value
89.99 Lakhs
Estimated cost
Bid Submission
07 Sep 2021
0 days left
EMD
1.80 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHURCHU → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From 15 Mile To Dubha Jarba Via Phusri Indra In Block Churchu Dist-Hazaribagh C
BOQ
| Sl. No. | Item Description |
| 1 | Clearing of grass and removal of rubbish up to a distance of 50 m outside the periphery of the area as per Technical Specification Clause 201S.O.R. Item No. (2.2) |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Tchnical Specification Clause 201 in Non-throny jungle by mechanical means.S.O.R. Item No. 2.3 (ii)A |
| 3 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tablea 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.41S.O.R. Item No.3.19 Case-II (ii) |
| 4 | Embankment Construction with material obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) Rolling with smooth wheeled roller.S.O.R. Item No. 3.16 (ii) |
| 5 | Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300.2 with 1000Mlead as per Technical Specification Clause 303.1S.O.R. Item No. 3.18 (ii) |
| 6 | Granular sub-base with Close Graded Material (Table:400-1) Plant Mix Method (Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401)With Grading -III MaterialS.O.R. Item No. 4.1 B (iii) |
| 7 | Water Bound Macadam (Providing laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the inrterstices of coarse aggregate. watering and compacting to the required density grading 2 as per Technical Specification Clause 405 (by Mechanical Means)S.O.R. Item No. 4.9 (ii) (a) |
| 8 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the inrterstices of coarse aggregate. watering and compacting to the required density grading 3 as per Technical Specification Clause 405 (by Mechanical Means)S.O.R. Item No. 4.9 (iii) (a) |
| 9 | Providing & laying 50 mm thick bukltup spray grout over W.B.M. Surface including cleaning the surface, heating bitumen to required temperature, applying prime & track coat @ 10 kg / 10 M2 and also including cost of bitumen and stone aggregates confirming to physical properties and grading given into the M.O.S.T. table 500-7 (3rd revision) spreading stone metal @ 0.66 M3 /M2 in layer, hand packing, rolling, compacting and then applying spray of bitumen @ 15 kg / 10 M2 Finishing with key aggregates @ 0.13M3 / 10 M2 in proper grade, camber or superelevation and rolling the same with power road roller and finishing the surface with template, including the cost of light, barrier, danger signal and chowkidar, making and maintaining diversion including cost of all labours, cost to P.O.L. and all otlher lubricanrts and also hire charges of road roller with DMR all complete job as per specification and direction of E/I. S.O.R. Item No. 5.4 (C) A P-449 |
| 10 | Providing and applying tack coat with Bitumen emulsion (RS-!) using emulsion distributor at the Rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydrdaulic broom as per Technical Specification Clause 503S.O.R. Item No. 5.2 |
| 11 | Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregate either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable roller capacity, finished to required level and grade to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.By manual means with Bitumen (S-65)S.O.R. Item NO. 5.9 Case-I (ii) P-449 |
| 12 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A as per Technical Specification Clause 510.By manual means with Bitumen (S-65)S.O.R. Item NO. 5.12 A Case-I |
| 13 | Excavation for structures (Earth Work in excavation of structuresas per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)I. Ordinary SoilA Manual MeansS.O.R. No. 12.1 I A |
| 14 | Providing and laying complete as per drawing and Technical specfication laid over cement concrete bedding.Dry Rubble FlooringS.O.R. No. 15.9 |
| 15 | Plain /Reinforced cement concrete in open foundation complete as per drawing and technical specification.P.C.C. Grade M15S.O.R. No. 12.8(A) |
| 16 | Stone masonry work in cement mortar 1:3 in foundation complete as drawaing and Technical SpecificationRandom Rubble Masonry.S.O.R. No. 12.7 (b) |
| 17 | Stone masonry work in cement mortar 1:3 for substructure complete as drawaing and Technical SpecificationRandom Rubble Masonry.S.O.R. No.13.4 (A) |
| 18 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications.P.C.C. M30S.O.R. No. 13.5 (A) |
| 19 | Furnishing and placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification.R.C.C. Grade M20S.O.R. No. 14.1(A) Case -1 (i)(P) |
| 20 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and Technical Specification.S.O.R. Item No. 14.2 |
| 21 | Plastering with cement mortar (1:4), 15 mm thick on brick or stone masonary work in substructure as per technical specification and clauses 613.4 & 1204 S.O.R. Item No.5.7.2+5.7.11 |
| 22 | Providing weep holes with day grades stone filter of 53 mm to 22.4 mm size in abutment and wing wall all complete job as per specification and direction of E/I.S.O.R. Item No. 13.8 |
| 23 | Tuck Pointing with cement mortar (1:3) on brick or stone masonary work as per drawing and technical specification Clauses 613.3 and 1204S.O.R. Item No. 5.7.10 (B.C.D.)100 M x 1.50 M = 150M2 |
| 24 | CEMENT |
| 25 | SAND |
| 26 | STONE CHIPS |
| 27 | STONE METAL |
| 28 | BOULDER |
| 29 | BITUMEN/EMULSION |
| 30 | STEEL |
| 31 | Goods & Services Tax (G.S.T.) @ 12% |
| 32 | Labour Cess @ 1% |
AI Tender Summary
Tender Timeline
Sep 02, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender