Kerala State Nirmithi Kendra has published Supplying Erection Testing And Commissioning Medical Gas Pipeline Other Equipments And Operation Theatre Light In Connection With The Modernisation Of Gynic Block And Adjoining Emergency Ot As Per Laqshya At Government Medical College Kollam. Supplying Er. Submission Date for this Tender is 10-09-2021. Medical Gas System Tenders in Parippally, Kollam Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying and fixing LED Clean Room Top Openable Light Fitting having Ss Bottom Frame / Powder Coated Bottom Frame Top Cover Suitable For Walkeable Ceiling of size 060mx0.60m |
| 2 | Suppying Celing OT light, LED type, Number of doom -2, Position - celing Mounted, Power Supply Single Phase, 220/110V +/- 10% AC, 50/60 Hz Number of Domes Two Domes with 7 Modules) |
| 3 | Supplying operation theater tableand accessories should have a minimum of 4 sections,table should have an easily detachable split leg and an easily detachable head section, tabletop should have a minimum height of 780mm or lesser, tabletop should have a minimum vertical stroke of 250mm, Should have a sealed hydraulic mechanism to avoid oil spillag, Should have at least 25 degrees Trendelenburg and reverse Trendelenburg, Should have at least 20 degrees lateral tilt movement, . Should have at least 80 degrees back up movement with the gas spring mechanism, head section should have up and down movement, leg section should have 90 degrees down movement and should move sidewards to a minimum of 90 degrees, table should have a heavy and sturdy base and compact to provide adequate foot room for the operating team, table should be mounted on heavy-duty casters which offer enhanced weight bearing capacity and free mobility, table should have a single lever foot-operated brake pedal.Should have minimum patient weight-bearing capacity of 120 Kgs, Base should be made of cast iron and all other parts and accessoriesshould be completely made of Stainless Steel 304 grade except the cushion and gas spring, table should be supplied with the following accessories,Mattress for the complete tabletop in sections - 1 set, A pair of arm boards with pad and fixing clamp - 1, A pair of padded shoulder support with clamps - 1, A pair of padded lateral support with clamps - 1, A pair of leg crutches with clamps - 1, Anesthetic screen frame with clamp -1,Patient restraint strap - 1,The table should have the facility for easily detachable kidney bridge attachment or an inbuilt kidney bridge, KMSCL Running Contract available, should be supply as per running contract specification |
| 4 | Supplying and fixing medical gas wall outlet Front-loading type terminal outlets should be designed to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment (flow meters, Surgical Tools, Suction regulators, etc.) at the point of use and it should be gas specific so that secondary devices cannot be “attached” to the wrong gas, When not in use, the gas should be in a non-flowing state within the Outlet (Terminal unit) sealed by “O” ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the “O” ring or a seat,The outlets should Quick Connect Type and gas specificity is accomplished by "Diametric indexing." / Geometric indexing/ BS/ DIN/ NFPA, Should have Pushed to insert and press-to-release mechanism for probes. |
| 5 | Supplying bed head unit 3 gas point and 4 switch with sockets (1 metre)Minimum length 1/1.2/1.5 metres, It should be made of High Strength Anodised Aluminium Profiles with integrated rail system for mounting accessories,Should be powder-coated (color as per user choice). Should provide backside cover, The panel should be designed to have provisions to accommodate the following, Supplying and fixing following modular switch/ socket on the existing, modular plate & switch box, including connections but excluding modular plate etc. as required (for one-bed head panel), KMSCL Running Contract available, should be supply as per running contract specification |
| 6 | Solid drawn seamless deoxidised ,non-arsencial ,half hard ,tempered and degreased copper pipes -as per specification 28 mm OD XX 0.9 mm thick(KMSCL Running Contract available, should be supply as per running contract specification) |
| 7 | Solid drawn seamless deoxidised ,non-arsencial ,half hard ,tempered and degreased copper pipes -as per specification 22 mm OD XX 0.9 mm thick( KMSCL Running Contract available, should be supply as per running contract specification) |
| 8 | Solid drawn seamless deoxidised ,non-arsencial ,half hard ,tempered and degreased copper pipes -as per specification 15 mm OD XX 0.7 mm thick( KMSCL Running Contract available, should be supply as per running contract specification) |
| 9 | Supplying line isolation valves 15 mm ball valve(KMSCL Running Contract available, should be supply as per running contract specification) |
| 10 | Supplying line isolation valves 22 mm ball valve(KMSCL Running Contract available, should be supply as per running contract specification) |
| 11 | Supplying line isolation valves 28 mm ball valve(KMSCL Running Contract available, should be supply as per running contract specification) |
| 12 | Supply and installation of heater package with humidstat and contact for humidity control |
| 13 | Supplying medical mobile UV disinfection UVC room air steriliser-Should be portable type, needed for room sterlisation |
| 14 | Providing,Fixing,Supply and Installation of storage unit size of (1665mmx865mmx350mm)made of 1.60mm SS 304 steel complete with all accessories etc of Hitek. |
| 15 | Emergency Nitrous Oxide Supply system 2x1 size:Supply installation,testing and commissioning of 1+1 cylinder emergency Nitrous Oxide supply system as per technical specifications.As per tender technical specifications.Emergency Nitrous Oxide Supply system 2x1 size:Supply installation,testing and commissioning of 1+1 cylinder emergency Nitrous Oxide supply system as per technical specifications.(Supply the specifications as per KMSCL running contract) |
| 16 | Medical Air plant(package unit) with Duplex Air Compressor:Supply installation,testing and commissioning of Medical Air Plant.As pertechnical specifications.(KMSCL Running Contract available, should be supply as per running contract specification) |
| 17 | Medical Vacuum plant package Duplex vacuum pumps:Supply installation,testing and commissioning of Medical vacuum Plant.As per tender specifications.(KMSCL Running Contract available, should be supply as per running contract specification) |
| 18 | Ward vacuum Unit:Supply installation,testing and commissioning of ward suction unit.As per technical specifications.(KMSCL Running Contract available, should be supply as per running contract specification) |
| 19 | Portable vacuum unit for OT.As per Technical specifications.Features, Portable, High Vacuum, Mobile Suction Units, Easy to clean plastic |
| 20 | Supply Installation testing and commissioning of Medical gas hose assemblies hose shall be colour coded throughout their length as specified in British standards |
| 21 | Supply of O2 cylinders-Class J(KMSCL Running Contract available, should be supply as per running contract specification) |
| 22 | Supply of N2O cylinders-Class J(KMSCL Running Contract available, should be supply as per running contract specification) |
| 23 | O2 male probe-Din out let probe, (KMSCL Running Contract available, should be supply as per running contract specification) |
| 24 | N2O male probe(KMSCL Running Contract available, should be supply as per running contract specification) |
| 25 | MA 4 bar probe(KMSCL Running Contract available, should be supply as per running contract specification) |
| 26 | Supplying medical gas system with anesthetist pendents plus copper pipe and other valves and monitors.(KMSCL Running Contract available, should be supply as per running contract specification) |
| 27 | LSCS Set-should have good quality metal (stainless steel )with all set of instruments including stainless steel box |
| 28 | Spinal Set-Should have good quality stainless type instruments |
| 29 | Suction Apparatus-Rating of Motor – continuous,Motor – thermally protected,Valves – Stainless steel, Filter – Bacterial filter autoclavable/ reusable, Suction Bottle Capacity - 2 x 2000 ml minimum (with safety valve), Gauge - 0 to 760 mm Hg, Vacuum Maximum - 660 mm Hg. Pump – Oil free Twin headed Piston pump,Suction Tubings - ID 7 mm, 5m long and non-collapsible., Should have air tight lids interconnected with both jars, Should have a noiseless Operation, Should provide filter to absorb moisture and water particles entering into the rotor, Should have a safety valve to prevent entry of fluids into machine in case the suction jar fills up, Should be well-designed, cabinet made of Stainless Steel 304 Grade, Should have facility to adjust suction pressure, Should bear ISI / CE mark, Should operate from 200 to 240Vac, 50 Hz input supplyKMSCL Running Contract available, should be supply as per running contract specification |
| 30 | Diathermy-Electro cautery machine Should have Monopolar & bi-polar cutting facility, Smart generator should be able to monitor changes in tissue impedance continuously and adjusts power, Monopolar outputs should have three cutting modes: a. Low cut for delicate tissue or Laproscopic cases havingmaximum power of 300w, b. Pure cut for clean, precise cut in general surgery having maximum power of 200W, c. Blend mode for cutting with homeostasis having, maximum power of 200W, All cut modes should be able to adjust output power depending, on tissue density by less than 15% or 5W, whichever is greater, It should have three Coag Modes with maximum power of 120W, a. Desiccate mode for low voltage contact coagulation suitable for Laproscopic and delicate tissue work.b. Fulgurate mode for efficient non-contact coagulation in most applications.c. Spray mode should have randomized spray effect ofvarying amplitude and frequency for coagulating large tissue areas with minimum depth of necrosis. It should have three bipolar modes with maximum power of 70W, a. Precise mode have fine control of desiccation indelicate tissue.b. Standard mode for applications at low voltage to prevent sparking.c. Macro mode for applications on tissue with high resistance.The unit should have individual digital display of power forBipolar, Monopolar cut and Monopolar Coag.The unit should not have RF Leakage current more than 150mA, The unit should have two hand switching and two Footswitch, Monopolar outputs and one hand switching and footswitching, bipolar output. It should have patient plate monitoring facility and should giveaudiovisual alarm and deactivate output if contact between, patient and patient plate is not proper to eliminate the risk ofpatient burns. Accessories:-a. Monopolar Footswitch:- 02 No.b. Bipolar Footswitch:- 01 No. c. Reusable hand switching Pencil: - 02 Nos.d. Reusable Patient Plate : - 02nos.e. Bipolar Forceps: - 01No.f. Forceps Cord:- 02Nos. g. Universal Adaptor: - 01No.Two years of comprehensive warranty including bulbs shouldbe provided along with technical support. It should follow international Safety Standard and requirementwith CE Certification or USFDA Approval.Users list with the addresses and contact nos. to be provided.Demonstration Compulsory.Operating and service manual should be supplied.Tropicalization: operating Temp. upto 40Deg. C; |
| 31 | Surgical Drum Large-should have good quality material Surgical Drum with Large size |
| 32 | Surgical Drum Medium-should have good quality material Surgical Drum with medium size |
| 33 | Surgical Drum Small-should have good quality material Surgical Drum with small size |
| 34 | Mayo"s Trolley-Stainless Steel type, should have wheel for rotating lid, should have tray mounted at top |
| 35 | Steel Foot Step-Stainless Steel foot step |
| 36 | Multiparameter-1. Should be able to monitor 6 channel ECG from 5 lead ECG, SPO2, NIBP, Respiration Rate and temperature. 2. Should be portable with carrying handle.3. Should have touch screen TFT display with at least 12 inches or higher with at least 6 waveforms and numeric displaysimultaneously.4. Should have Lithium ion battery with 3 hours battery back up.5. Should have keys for quick access to main functions.6. Should have adult, pediatric and neonatal modes.7. Should provide prominent prioritized audio, visual alarms for high, low heart rate, SpO2, RR,low battery and lethal arrhythmia8. Recognition with detailed list (more than 15 parameters) in the monitor to set priority and ST Analysis.9. NIBP can be taken on manual/auto/stat modes.10. Should provide following accessories: i. Reusable adult 5 lead ECG cable set – 2 nos. ii. Reusable adult and pediatric SPO2 finger probes – 1 each. iii. Adult and pediatric NIBP cuff of different size, Rate of Reusable Neonatal SpO2 probe shall be quoted separately which will not be taken for evaluation.11. Should work on 200-240V AC/50Hz with inbuilt rechargeable battery.12. Should have safety certificate from a competent authority CE issued by a notified body registered in European Commission / FDAEP division Running Contract Notice Page 2/3 (US) / STQC CB certificate/ STQC S certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate / test report shall be produced along with the technical bid.13. Should have display perfusion index,14. Monitor should have networking facility with bidirectional & bed to bed communication.15. Monitor stand should be supplied along with the machine as per the following specification, i. Monitor stand -extruded Aluminum, powder coated, ii. Load bearing capacity 20 kgs approximately. iii. Should supply, install with necessary anchor fastners at the site.16. Equipment performance should not be affected by electromagnetic interferences radiated or conducted through power lines fromanother device, KMSCL Running Contract available, should be supply as per running contract specification |
| 37 | Roller Shifter Stainless steel |
| 38 | Tray Lid Large-Stainless steel type, |
| 39 | Tray Lid Medium-Stainless steel type, |
| 40 | Tray Lid Small-Stainless steel type, |
| 41 | Small Bowl- |
| 42 | Medium Bowl |
| 43 | Kidney Tray Large Stainless steel type |
| 44 | Kidney Tray Medium Stainless steel type |
| 45 | Instrument setting trolley-Stainless steel type, should have two plat form ( top plat form & Bottom plat form) |
| 46 | Spot Light-Mobile LED spot ligt having good quality light (white colour light preferable) |
| 47 | Crash cart-Overall approx dimensions: 900 L x 400 mm W x 1540 mm H.Complete SS Framework and SS Shelves. Two Polystyrene Lockable Storage units with Three Drawer each.6 Nos. ...Stainless Steel Saline Rod made of 12 mm dia. Mounted on 125 mm Dia non-rusting swivel casters two with brake. |
| 48 | Bain Circuit- |
| 49 | Stretcher trolley with side rail& belt- 1. Size : 2000mm (L) x 660mm (W) x 830mm (H) 2. Main frame : 32mm OD x 1.6 mm Thick M.S E.R.W 3. Supporting frame : 25mm OD x 1.6 mm Thick M.S E.R.W4. Castor wheels with 200 mm dia.5. Diagonal Dual lock castors 6. Stretcher top frame 25mm OD x 1.6 mm Thick M.S E.R.W 7. Sheet should be made of CRCA of 1.2mm thickness 8. Provision for IV pole.9. Max. Load of 1000 Kg,10. Provision for carrying oxygen cylinder. 11. Finish: powder coated with anti-microbial epoxy polyester powder. 12. Should supply with Stainless Steel stretcher and removable mattress (washable)13. Should comply with National / International standards |
| 50 | Table top Electrical sewing machine |
| 51 | Oxygen Cylinder Stardard A type |
| 52 | Oxygen Cylinder Stardard B type |
| 53 | Oxygen Conversion Kit |
| 54 | Nitrous Oxide Clinder |
| 55 | Inverter |
| 56 | Emergency Lamp |
| 57 | Torch |
| 58 | Patient Warmer |
| 59 | Water Purifier |
| 60 | Induction Cooker |
| 61 | Foetal Doppler-Hand held foetal doppler with rechargable type, recharger needed |
| 62 | Glucometer |
| 63 | Bp Apparatus Manual |
| 64 | BP Apparatus Digital |
| 65 | Nebuliser |
| 66 | Office Table |
| 67 | Steel Almirah |
| 68 | Refrigerator-Refrigerator with stabilizer 1. Should have a Capacity of 165 Litres or above. 2. Shelves shall be of Toughened glass type. 3. Should have EEC 4 star rating or above. 4. Should have inbuilt protection for voltage fluctuation or to be supplied with external stabilizer of adequate KVA capacity. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
