Construction Of K.T. Weir At Gohogaon Tq. Mehkar , Dist. Buldhana. As Per Nit
Tender Value
46.81 Lakhs
Estimated cost
Bid Submission
15 Sep 2021
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Buldana → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of K.T. Weir At Gohogaon Tq. Mehkar , Dist. Buldhana. As Per Nit
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 2 | Excavation in Hard Murum including bouldersup to 0.6 m diameter (0.113 cum) for canal,seating of embankment, filter drain / catchwater drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides torequiredleveland profile etc.,complete with lead up to 15 m and 6m lift. |
| 3 | Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed andsides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 4 | Excavation in Hard Rock of all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling / pre-splitting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and lift up to 6 m. |
| 5 | Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal (40 msa.)for PCCbelow sill level ) with or without surface reinforcement / RCC concreting requiringheavyor specialtypeof shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m. |
| 6 | Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal (20 msa.)for PCC for pierwith or without surface reinforcement / RCC concreting requiringheavyor specialtypeof shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m |
| 7 | Providing and placing deformed steel reinforcement as per design ,drawing ,cutting,bending, hooking, laying in position and tying M.S/HYSD/TMT bars for reinforcement for RCC work as per detailed drawing etc complete 8mm |
| 8 | Providing and placing deformed steel reinforcement as per design ,drawing ,cutting,bending, hooking, laying in position and tying M.S/HYSD/TMT bars for reinforcement for RCC work as per detailed drawing etc complete 25mm |
| 9 | Providing and fixing sill beam ISWB 150X75MM and M S channel ISWB 150X75MM as per detailed design and drawing including one coat of anti corresive paint with two coats of oil paints with all lead and lift as per drawing etc completeA- SILL BEAM |
| 10 | Providing and fixing sill beam ISWB 150X75MM and M S channel ISWB 150X75MM as per detailed design and drawing including one coat of anti corresive paint with two coats of oil paints with all lead and lift as per drawing etc completeB -VER CHANNELS |
| 11 | Manufacturing with QAP & fabrication of KT weir needle gates-straighttype size 2.15x0.5M- 72Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 12 | Back filling up to ground level behind the canal structures etc. complete (without royalty) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete. |
| 13 | Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 persqmusing stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material. |
| 14 | Providing earth work for embankment using selected pervious / impervious material available directly from excavation in layers including cost of all materials , machinary , labour all other operations such as collection of material , labour all other operations such specified thickness sorting out breaking clouds levelling sectioning edges /sides , watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with aa leads and lifts |
| 15 | Providing and fixing canal information board of 1.20 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelledbondedwith redretroreflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in- charge. |
| 16 | Dewatering during entire period of excavation and construction |
| 17 | Royalty not included in rates |
| 18 | GST(12%) |
| 19 | GIS(1%) |
AI Tender Summary
Tender Timeline
Aug 31, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender