Replacement Of Dg Set Against Ber And Remote Monitoring System For Lift At Map Pkt I And Pkt Ii And P-101 At Hqtc Bangalore Replacement Of Dg Set Against Ber And Remote Monitoring System For Lift At Map Pkt I And Pkt Ii And P-101 At Hqtc Bangalore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Sep 2021
0 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
HQ TC BANGALORE → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of Dg Set Against Ber And Remote Monitoring System For Lift At Map Pkt I And Pkt Ii And P-101 At Hqtc Bangalore Replacement Of Dg Set Against Ber And Remote Monitoring System For Lift At Map Pkt I And Pkt Ii And P-101 At Hqtc Bangalore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Sep-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for design, build and assembly of Elevator Switch for P-319 to P-325 (for 14 elevators) includes:(a) Emergency Sensor and reset box elevator Hooter & Transmitter electronics assembly.Wireless receiver station Based on Teller-X architecture, make: Tellercomm includes(i) Wireless hub receiving station.(ii) 15.4” monitor HDMI with Hooter.(iiI) Mini UPS for all devices |
| 2 | M&L for design, build and assembly of Elevator Switch assembly for P-317 -P318 (For 4 elevators) includes:(a) Emergency Sensor and reset box elevator Hooter & Transmitter electronics assembly.Wireless receiver station Based on Teller-X architecture make: Tellercomm includes:(ii) 15.4” monitor with Hooter(ii) Wireless hub receiving station.(iii) Mini UPS for all devices(iv) Installation with material. |
| 3 | M&L for additional Number Monitor station at Ashwatnagar gate includes:(i) Quake engine GSM TX Module on at P-317 -P318 attender station(ii) Quack engine GSM TX Module at P-319 – P325 attender station(iii) 15.4” monitor with Hooter station with Quack engine GSM RX Module(iv) Subscription of (3) IOT SIMs for 1 year(v) Mini UPS for all devices |
| 4 | M&L for additional Monitor station at Main gate includes:(i) 15.4” monitor with Hooter station with Quack engine GSM TX Module(ii) Subscription of (1) IOT SIM for 1 year(iii) Mini UPS for all devices |
| 5 | M&L for design, build and assembly of Elevator Switch with Teller-X architecture for HQ building elevator includes:(i) Emergency Sensor and reset box (ii) Hooter station with Quack engine GSM TX Module(iii) Subscription of (1) IOT SIM for 1 year(iv) Mini UPS for all devices |
| 6 | Note: (a) Sl. No 1 & 2 are standalone system for P-319 to P-325 (for 14 elevators) and P317 to P318 (for 4 elevators) respectively. (b) Item no 3 & 4 includes an active IOT sim connection that is part of your offering for 1st year and the renewal of subscription is automatic on purchase of maintenance for subsequent years (6(a) & 6(e))(c) Item No 5 includes Emergency sensor and IOT switch for P-101 building. (d) The above jobs includes with 1 year of maintenance including spares. |
| 7 | Supply, installation in position, testing, commissioning and handing over of a diesel generator set of 82.5 KVA capacity, 3 phase, 415 volts, 50Hzcomplete with diesel engine (66 KW at 0.8 p.f. lag), 102 BHP engine, AMF power control panel, water cooled radiator, self-starting device, batteries, battery charger, engine panel, base frame, anti-vibration mountings, diesel tank, along with CPCB II acoustic enclosure , power control panel and all connected accessories complete as described in detailed technical specifications for the set to the entire satisfaction of engr-in-charge. Make: KOEL iGREEN, Model 4R1040TA G1 of Kirloskar |
| 8 | Supply & Laying of 1 run of 1.1 KV grade 3.5 Core / 70 mm² Aluminum conductors PVC insulated armoured cables laid through walls, ceilings, RCC columns with saddles & spacers including making opening & repairs wherever required. (From DG Set to AMF Panel and to distribution panel) |
| 9 | Termination of cables indicated in Sr. No. 2 by using suitable crimping type aluminum lugs, glands etc. at both the ends |
| 10 | M&L for earthing complete with using copper plate 60×60cm ×3.15mm thick earth electrode and 20×3mm copper strip thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to 20×3mm copper strip by means of bolts, nuts, check nuts and washers of galvanisediron or steel all as shown in electrical plate No 3 of SSR Part Iconnected to earth test point all as specified or indicated including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm bore GI medium grade earth lead protection pipe,50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars,funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion , complete all as specified and directed. |
| 11 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cmx 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI strip of 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanisediron or steel all as shown in electrical plate No 3 of SSR Part Iconnected to earth test point all as specified or indicated including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm bore GI medium grade earth lead protection pipe,50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars,funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion , complete all as specified and directed.( body earthing -02 nos.) |
| 12 | Supply and fixing of 1 run of 20 mm x 3 mm copper earth strip with required materials such as brass clamps, screws, spacers and with riveted joints and connections with chromium plated nut and bolts complete as directed.(for neutral -02 nos.) |
| 13 | Supply and fixing of 1 run of 32 mm x 6 mm GI earth strip with required materials such as brass clamps, screws, spacers and with riveted joints and connections with chromium plated nut and bolts complete as directed.(for Body -02 nos.) |
| 14 | Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes,complete all as specified and directed. |
| 15 | Returning, filling of excavated soil in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed. |
| 16 | Removal of surplus soil to a distance exc.50m and not exc 1.5 mtr and depositing at the location all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and spread dry sand in trenches for cable cushioning all as per clause 19.75 in SSR Part I. |
| 18 | Supply andlay un-reinforced pre-cast concrete cable cover class LV, type 1, flat, size 250mm x 150mm x 40mm for cable protection in trenches all as specified and as directed. |
| 19 | Supply and Laying GI Pipe light grade 80 mm dia for protection of UG cable. |
| 20 | Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 21 | M&L for PCC foundation with cement mortor, and 40mm graded aggregate 1:2:4 type B2, for DG set 200mm below GL and 200mm above GL |
| 22 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 |
| 23 | Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\") ® |
| 24 | Mild steel screw bolts (machine made) with hexagonal or squareheads at one end and screwed the other, or screwed both ends, eachscrewed end to be fitted with washers and one hexagonal or squarenut, n exc 5cm long |
| 25 | Painting on steel surfaces of any description, over 10cm in width or girth,not otherwise described, with two coat of synthetic enamel paint over a coat of red oxide primer |
| 26 | Pre- painted galvalume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified |
| 27 | Notes For Schedule \"A\": Phase II shall be starts after completion of warrenty period of one year after completion of Phase I (Item No 1 to 25) above. |
| 28 | Comprehensive Maintenance Contract for next 2 years |
| 29 | Maintenance of Elevator Switch assembly for P-319 to P-325 (for 14 elevators) |
| 30 | Maintenance of Elevator Switch assembly for P-317 -P318 (for 4 elevators) |
| 31 | Maintenance of Monitor station at Ashwatnagar gate |
| 32 | Maintenance of Monitor station at Main gate |
| 33 | Maintenance of Elevator switch Assembly for HQ Building |
| 34 | Note for Sl. No 26 (26.01 to 26.05) :- (a)Payment will be made in quarterly basis. (b)Comprehensive maintenance contract includes priority service support including free replacement of parts against defects other than damage due to defect. |
AI Tender Summary
Tender Timeline
Sep 08, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 15, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender