Day To Day Reapir Of Handpumps At Various In Durbuk Block For The Year 2021 22 Day To Day Reapir Of Handpumps At Various Locations In Durbuk Block For The Year 2021 22
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Sep 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Durbuk → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Day To Day Reapir Of Handpumps At Various In Durbuk Block For The Year 2021 22 Day To Day Reapir Of Handpumps At Various Locations In Durbuk Block For The Year 2021 22
BOQ
| Sl. No. | Item Description |
| 1 | Extraction of 32mm dia riser pipe along with connecting rod and replacing the damaged part of Hand pump. Thejob also includes transportation charge |
| 2 | Lowering of 32mm dia riser pipe along with connecting rod after replacing the damaged part ofHand pump . |
| 3 | Head Assembly For India Mark II DeepWell HandPump |
| 4 | Handle Galvanised |
| 5 | Additional Plate Galvanised |
| 6 | Front Cover Galvanised |
| 7 | Handle Axle s.s. for Handpump |
| 8 | Ball Bearings 6204 z |
| 9 | Chain with coupling for H.P. |
| 10 | Spacer for Axle Plated |
| 11 | Hex Bolt 12×20 MM Plated |
| 12 | Hex Bolt 12×40 MM For HandPump |
| 13 | Hex Nut 12MM For Handpump |
| 14 | Washer 12MM (plated) |
| 15 | Nyloc Nut M10 For HandPump |
| 16 | Washer 4MM Thick (plated) |
| 17 | Washer 4MM Thick (plated) |
| 18 | Cylinder Assembly For India Mark II Deep Well HandPump |
| 19 | Cylinder Body With Linear For India Mark II Deepwell Handpump |
| 20 | Plunger Rod For IM II H.P. |
| 21 | Reducer Cap For I.M.II.HandPump |
| 22 | Plunger Yoke Body For IM II H.P. |
| 23 | Spacer For Cylinder For MK II HandPump |
| 24 | Follower For India Mark II HandPump |
| 25 | Upper ValveGuide For IM II H.P. |
| 26 | Check Valve Guide For IM II Deep Well HandPump |
| 27 | `Check Valve Seat For IM II Deep Well HandPump |
| 28 | Rubber Seat Retainer For India Mark II Deep Well. |
| 29 | Sealing Ring For India Mark II Deep Well HandPump Cylinder |
| 30 | Rubber Seating Small For Upper Valve |
| 31 | Rubber Seating Big For Check Valve |
| 32 | Rubber Cup Washer (Pump Bucket Nitrile)For MK II HandPump |
| 33 | Upper Valve Assembly With Plunger Rod For India Mark II HandPumps. |
| 34 | Lower Valve Assembly For India Mark II Deep Well HandPumps (Check Valve Complete |
| 35 | Water Tank 1 1/4\" Galvanised |
| 36 | Pedestal Galvanised |
| 37 | Connecting Rods 12MM Dia ×3 Mtrs. Length For IM II HandPumps |
| 38 | Hex Bolt M 12×50 Plated |
| 39 | Hex Bolt 12×20 MM Plated |
| 40 | Riser Pipe 32MM Dia N.B.X3 Mtr.long Fitted With Socket Screwed Hot Dip Galvanised As Per IS |
| 41 | fmishing and reinforcement. |
AI Tender Summary
Tender Timeline
Sep 01, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedSep 06, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender