Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum. Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum., Musabani-Jharkhand

TDR : 29045134

Tender Notice
BOQ

Expired

Musabani , Jharkhand

Tender Brief : Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum. Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum.

Document Fees
₹ 10000 /-

EMD
₹ 805000.0 /-

Tender Value
₹ 8.04 Crore /-

Submission Date
15-09-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Building work
2	EARTH WORK INEXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.
3	EARTHFILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
4	FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
5	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
6	Providing designation 75 A one brick flat soling joints files with local sand including cost of watering taxes royalty all complete as per building specefication and direction of E/I
7	Providing P.C.C. M-10 with nominal mix of (1:3:6) inFoundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.
8	Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in FOUNDATIONand plinthwithapproved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
9	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.5.3.9.11:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)IN FOUNDATION
10	Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in COLUMN with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.
11	Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
12	Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in BEAM with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.
13	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
14	Providing R.C.C. M-20 with normal mix of 1:1.5:3 in ROOF SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
15	Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
16	Providing R.C.C.M 200 (1: 1.5: 3) inBand at Lintellevel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and directionof E/I
17	Centering and shuttering including strutting, propping etc. and removal of form forSmall lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
18	Providing R.C.C. M-20 with nominal mix of 1:1.5:3 in LINTEL with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all comple as per building specificationand direction of E/I.
19	Centering and shuttering including strutting, propping etc. and removal of form forSmall lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
20	Providing R.C.C M-200 with nominal mix(1:1.5:3) instair case with approved quality of stone chips20 mm to 6 mm size graded and clean course sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in concrete mixer and placing in position , vibrating, striking, curing (but excluding the cost of reinforcement)royalty and taxes all complete job as per building specification and direction of E/I.
21	Centering and shuttering including strutting, propping etc. and removal of form forStairs, (excluding landings) except spiral-staircases
22	Providing 63 mm thick R.C.C. M-20 with nominal mix of 1:1.5:3 in CHAJJA with approved quality of stone chips 20 mm to 6 mm size graded20 mm to 10 mm, 10 mm to 6 mm stone chips by volume(2:1) and clean coarse sand of F.M. 2.5 to 3 including making drip course mix in concrete in mixer, placing in position screening, vibrating, striking, and providing 6 mm cement plaster (1:4) in ceiling and sides of Chajja with making drip course curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer Incharge.
23	Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges
24	Providing 35 mm thick precast R.C.C. M- 20 with nominal mix of (1:1.5:3) shelves with approved quality of stone chips 12mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5 mm cement punning at top and side and 6mm cement plaster (1:4) at bottom including screening , curing and placing the slab in position(but excluding the cost of reinforcement) taxes and royalty all complete as per building specificationand direction of E/I.
25	Centering and shuttering including strutting, propping etc. and removal of form for4Shelves (Cast in situ)
26	Providing 35 mm thick precast R.C.C. M- 20 with nominal mix of (1:1.5:3) shelves with approved quality of stone chips 12mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5 mm cement punning at top and side and 6mm cement plaster (1:4) at bottom including screening , curing and placing the slab in position(but excluding the cost of reinforcement) taxes and royalty all complete as per building specificationand direction of E/I.
27	Centering and shuttering including strutting, propping etc. and removal of form for4Shelves (Cast in situ)
28	Providing 25 mm thick DAMP PROOF COURSE with cement concrete M-20 with nominal mix 1:1.5:3 with approved quality of stone ships of 20 mm to 6 mm (20mm to 10 mm : 10 mm to 6 mm stone chips 2:1) size graded and clean coarse sand of F.M. 2.5 to 3 including screening, mixing cement concrete in mixer with 5% Cico or any other approved water proofing compound and placing in position, striking, curing taxes and royalty and complete as per building specification and direction of E/I.
29	Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge
30	Providing125 mm thick REINFORCED DESIGNATION75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of Engineer Incharge .
31	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
32	Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I
33	Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I
34	Providing 12 mm thick water proof CEMENT PLASTER(1:6)on outside wall with clean coarse sand of F.M.1.5 and 5% cico including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (Cost of cico will be paid separately)
35	Providingtor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing includingcarriage of bars to work site, cutting, bendingandbinding with annealedwirewithcostofwire, removal ofrustplacingtherods in position all complete as perbuilding specification and direction and direction of E/I.(ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL)
36	(a) 8 mm & 10 mm(TMT coil Fe 500) (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
37	(b) 12 mm (TMT coil Fe 500) (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
38	Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I. (where material is no
39	Supplying, fitting & fixing 250 x 20 x 6 mm L-type M.S. clamp properly fishtailed including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all layout and materials and taxes as per building specification and direction of E/I.
40	Making20x6 mmgroovesinplaster surface over walls trully horizontal orvertical asspecifiedat regular intervals atallheightsincluding cleaningfinishing , scaffoldingand curingwith all leads andlifts of water all complete as per buildinngspecification and directionofE/I.
41	Providing and laying DOUBLE CHARGE VITRIFIED FLOOR TILESin different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622/ ISO 13006, of approved make, in all coloursand shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqmincluding grouting the joints with white cement and matching pigments etc. complete.
42	Providing and fixinging 20 mm thick mirror polished, machine cut for kitchen platform and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
43	Extra for providing edge moulding to Granite stone counters, vanities etc. over above including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architects / E/I.
44	Marble stone flooring with 18 mm th marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
45	Udaipur Green Marble
46	Extra for pre finished nosing to treads of steps of marble stone
47	Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 m
48	Providing and laying 6 mm precast SEMI GLAZEDCERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 15cmx15cm tiles.
49	Providing 25mmthickfirst class patent flooring ( 1:2:4 ) with stone chips in twolayers bottomlayer 19 mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6mm thick(1:2) with 6mm down stone chips,in panels, including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty all complete as per building specification and direction of E/I.
50	Providing 12mmcement plaster(1:3) with clean course sand of F.M 1.5 with floatingcoat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.
51	Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and1.8 cm thick fixed in Urinal Partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement :2 coarse sand : 4 stone chips)as per direction of E/I and finished smooth.
52	Providing and laying VITRIFIED PARKING/ INDUSTRIAL TILESin different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 4457:2007 of approved make, in all coloursand shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqmincluding grouting the joints with white cement and matching pigments etc. complete.
53	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone-exposed face fine dressed with rough backing.40 mm thick
54	suppling , fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhat in doors window,sky light, fanlight and celevitial window opening including wedge over clmps all including application of two coats of wood preservative of approved quality on the surface , building walls and lintel all complete as per building specification and direction of El.
55	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:(Approved Brand - Green club/ Green Optima/ Century/ Duro).35 mm thick including ISI marked Stainless steel hinges with necessary screws.
56	Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type
57	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
58	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
59	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
60	Powder coated aluminium (minimum thickness of powder coating 50 micron) WT. OF AL. SECTION FOR 3 TRACK WINDOW - @ 0.75 KG PER S.FT.
61	Providing and fixing glazing in aluminium window, ventilator shuttersetc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
62	Providing and fixing glazing in aluminium door,shuttersetc. with PVC/neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness
63	Providing and fixingDouble action hydraulic floor spring of approved brand and manufacture I.S.:6315 marked, Hardwyn Make (Model 3000) or equivalent for doors including cost of cutting floors as required, embedding in floors & cover plates with brass pivot and single piece M.S. sheet outer box with side plate etc.complete as per the direction of E/I.WITH STAINLESS STEEL COVER PLATE:- DOOR WINDOW
64	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
65	DSR 9.103Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. co
66	Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. (Approved brand - Godrej/ Dorset)
67	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. (Approved brand - Godrej/ Dorset)
68	Providing and fixing aluminium round shape handle of outer dia.100 mm with SS screws etc. coplete as per direction of E/I. Powder coated minimum thickness 50 micron aluminium.
69	Providing and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper
70	Providing and fixingaluminiumTOWER BOLTS ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete.
71	a 300X 10MMALUMINIUM DOOR -
72	150X 10MM
73	Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured).
74	Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
75	Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
76	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofterraces etc. consisting of following operations.
77	(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment.
78	(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
79	(c ) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645.
80	(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietarywater proofing compund conforming to IS : 2645 and finally finishingthe surface with trowel with neat cement slurry and making of 300X300 mm square.
81	(e) The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I.
82	With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (WORKS TO BE DONE BY REGISTERED APPLICATOR OF PIDILITE/ SIKA/ ROFF WITH 10 YRS. GUARANTEE.)
83	Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
84	Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives \"Snowcryl - XT\" of M/S Snowcem India Ltd, or equivalent of required shade. New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. )
85	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete.
86	Finishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
87	Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over new WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.
88	Providing Primer one coat of read lead paint of approved make over new STEEL SURFACE preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
89	Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
90	Providing and fixing stainless steel(Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)
91	Providing & fixing on wall face unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia
92	Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .
93	Coupler - 110 mm
94	SHOE - 110MM
95	BEND 110 MM
96	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
97	110 MM
98	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. AREA OF AUDITORIUM - 8,953.00 SQ. FT. WT. OF TRUSS = @ 3.25 K.G. / S.FT.
99	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Approved Brand - Tata Bluescope/ Equivalent)
100	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
101	Ridges plain (500 - 600mm)
102	Flashings/ Aprons.( Upto 600 mm)
103	Gutter (600 mm over all girth)
104	Steel work welded in built up sections as per drawing including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using steel in Spiral stairs. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
105	Providing & ejecting Chemical emulsion for pre-constructional ANTI TERMITE TREATMENT and creating a chemical barrier under a alround the column pits, wall trenches, basement excavation, top surface of plinth filling junction of wall and floor along the external perimeter of building expansion joints, surrounding of pipes and conducts tic. complete (plinth area of the building at ground floor only shall be measured) with Chlorpyrifos 20% EC as per building specification and direction of E/I. (4 stages treatment)
106	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
107	Bricks
108	LocalSand
109	Coarse Sand
110	Stone Chips
111	Stone Metal
112	Cement
113	Steel
114	Earth
115	Interior Work
116	Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of0.33 mmthick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm)50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’.
117	The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thicksheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. (Approved Brand - Armstrong/ Saint Gobain).
118	With 20 mm thick beveled tegular mineral fibre falseceilingtile (NRC 0.7), (Approved Brand - Armstrong/ Saint Gobain)
119	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
120	12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) (Approved Brand - USG Boral/ Saint Gobain)
121	Extra for sunk or raised mouldings in the plaster of paris (Gypsum anhydrous) ceiling.
122	Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 48kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
123	38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.
124	Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.
125	INSTALLATION: Install wooden battens (provided by others) of section 50mmx50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks (GTPT001) provided by Armstrong over the lowest and second wooden batten at an on-center distance of 600mm. Install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for border channelled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour (provided by others). Approved Brand - Armstrong/ Anutone)LENGTH OF WALL = 356
126	Providing supplying and installing Armstrong \"Optra Acoustical Wall Panelling\" with square edge made of fibre glass subtrate 25mm thick and wrapped on the front side with an acoustically transparent and fire resistant fabric with an option of colours as per the choice of the Architect of size 2100x600 or 600x600mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using wall panel impalers including fixing of panel to the wall surface byself taping screws. Silica based construction adhessive shall be dabbed on to the prjecting elements (spikes) of the impalers and panels shall be pierced through the spikes with maintaining the line and level of panelApproved Brand - Armstrong/ Anutone)
127	Providing and fixing Roller Blind (VISTA LEVELLOR) including all fittings and labour, complete job.
128	Water Supply & Sanitary work
129	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
130	White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.
131	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.
132	Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 15mm nominal bore approved brand C.P. fittings
133	Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.
134	15mm nominal bore approved brand C.P. fittings
135	Approved rate 42 xxiii + 20% (10 for C.P.+10 for labour, etc.)Providing and fixing C.P Soap Dish of aaproved size, shape and approved brand with concealed fittings, complete job.
136	Providing and fixing Wash basin with accessories, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require all complete.
137	BASIN - CAT. NO. - JAQUAR, CNS-WHT-705 (WITH RIM TOP)
138	PILLAR COCK - FUS - 29001
139	BOTTLE TRAP - CAT. NO. - JAQUAR, ALD - 769L - 300X190
140	WASTE COUPLING - CAT. NO. - JAQUAR, ALD - 709
141	Providing and fixing C.P. brass angle valve for basin mixer, gyser & others points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.
142	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
143	White Vitreous China Wash basin size 630x450 mm witha single 15 mm C.P. brass pillar tap
144	Providing and fixing white vitreous china flat back half stall urinal of 580X380X350mm with white PVC automatic flushing cistern, parryware/Hindware with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass with waste fitting as per IS : 2566 P.V.C. trap with outlet grating and other couplings in C.P. brass including parenting of fitting and cutting and making good the walls and floors wherever required..
145	Single half stall urinals with 5 litre P.V.C. auotmatic flushing cistern
146	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
147	32MM nominal bore.
148	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
149	25mm nominal bore
150	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
151	Approved rate 41 V+ 20% (10 for C.P.+10 for labour, etc.)Providing and fixing 100mm dia. Steel Jali of approved quality.
152	Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required:
153	kitchen sink without drain board
154	610x510mm bowel depth 200mm
155	42 xvi + 20% (15 for C.P.+O.H. + 5 for labour, etc.)Providing and fixingC.P Sink cock with swinging casted spout with concealed fitting arrangements.
156	Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality. 15 mm nominal bore with 45 cm length.
157	Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.
158	Flexible Pipe
159	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE& VENTPIPES)
160	75 mm dia
161	110 mm dia
162	Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised -Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .
163	Coupler -110mm
164	Single pushfit Coupler 110mm
165	Single tee with door110X110X110 MM
166	Single tee without door 110X110X110 MM
167	Bend 87.5°110 MM
168	SHOE 110mm
169	N.S.Nahani Trap110X75 MM
170	N.S.Multitrap110X100 MM
171	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
172	Concealed work including cutting chases and making good the wall etc..
173	15mm dia
174	20mm dia
175	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) Exposed on Wall
176	25mm dia
177	32 mm dia.
178	Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.
179	150 MM dia R.C.C. pipe
180	250 MM dia R.C.C. pipe
181	Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
182	Inside dimensions 455X610X mm and 45 mm deep for single pipe
183	With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
184	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
185	Providing and fixing C.P. brass Health Faucet with 8mm dia. 1.20m long flexible tube & wall hook.
186	Hand Shower -CAT. NO. - JAQUAR, ALD - 573
187	Providing and fixing C.P. Towel Ring
188	Towel Ring -CAT. NO. - JAQUAR, AQN - 7721
189	Septic Tank
190	Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.
191	Extra for earthwork in hard soil as per specification and direction of E/I. ( Vide classificationofsoil iten _B)
192	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
193	Providing designation 75 A one brick flat soling joints files with local sand including cost of watering taxes royalty all complete as per building specefication and direction of E/I
194	Providing P.C.C.M150 in normal mix of(1:2:4) in foundation with approved quality of stone chips 20 mm 6 mm size graded and clean coarse sand ofF.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I
195	Providing R.C.C.M 200 nominal mix of(1:1.5: 3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing,( but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and directionof E/I
196	Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.
197	Providing Precast R.C.C.M - 200 with nominal mix of (1:2:4) slab of desired size withapproved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement ) taxes and royalty , all complete as per building specification and direction of E/I.
198	Providing designation 75A brick work inC.M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
199	Providing 12mm thick cement plaster (1:3) with clean coarse sand ofF.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as perbuilding specification and direction of E/I.
200	Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as perbuilding specification and direction of E/I.
201	Providing and laying brick bats in soakpit with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.
202	Supplying, fitting and fixing C.I. cover with frame for mane hole and inspection chamber with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I. (a) Size 600 x 450 mm (Wt. 25 Kg).
203	Providing Tor steel reinforcement of 8 mm dia rods as perapproved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I.(Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
204	Providing Tor Steelreinforcementof 10mm , 12 mm & 16 mm dia bars as perapproved design and drawing excluding carriage ofbars to work site, cutting bending and bindingwith annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specificationand direction of E/I
205	10 mm (TMT coil Fe 500) ((Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
206	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
207	Bricks
208	LocalSand
209	Coarse Sand
210	Stone Chips
211	Cement
212	Steel
213	Making Soak Pit 2.5 m diameter 3.0 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standerd design .
214	Rain water Harvesting
215	Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal ofexcavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I.
216	Earth filling in foundation trenchesand plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I. ( Mode of measurement compacted volume)
217	Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)
218	Providing designation 75-a, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge
219	Providing P.C.C. M-15 with nominal mix of (1:2:4) in FOUNDATIONand plinthwithapproved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I.
220	Providing designation 751 brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.
221	Providing tuck pointing [1:3] in cement on brick work clean coarse sand of F.M 1.5 FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I
222	Providing 12mmcement plaster(1:3) with clean course sand of F.M 1.5 with floatingcoat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.
223	DT: Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH ring Machine all complete including supplying all meterial, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of engineer-in-charge. (Basic rates)
224	(i) Drilling up to 30 mtr. Depth below G.L. in Rural Area
225	Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs, confirming to IS: 12818, including hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of engineer-in-charge.
226	100 mm nominal size dia. -
227	Supplying,filling, spreading and levelling stone boulders of of size range 5cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge.
228	Supplying,filling, spreading and levelling gravels of size range, 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders,in the required thickness, for all leads and lifts, all complete as per direction of E/I.
229	Providing R.C.C. M-20 with normal mix of 1:1.5:3 in SLAB with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
230	ProvidingT.M.T. Reinforcementoffollowing dia Rods as perapproved designand drawing includingcarriage of M.S. Rods of (Straightorin coils)to worksite, cutting, bendingandbinding with annealedwirewithcostofwireremoval ofrustplacingtherods in position all complete as perbuilding specification and direction and direction of E/I.(Only valid for TATA TISCON/SAIL/JINDAL/ELECTROSTEEL/RINL).
231	TOR 8MMDIA. -
232	Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
233	Inside dimensions 455X610X mm and 45 mm deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
234	Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.
235	150 MM dia R.C.C. pipe
236	250 MM dia R.C.C. pipe
237	Supplying fitting and fixing Galvanised wire mesh of average width of aperture 1.4 mm and nominaldia of wire 0.63 mm(2\"-0\"x2\"-0\"*2) in position as per specification and direction of E/I.
238	Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
239	Bricks
240	LocalSand
241	Coarse Sand
242	Stone Chips
243	Cement
244	Steel
245	Fire Fighting
246	Sub Head - I (Pumps & Equipments )
247	4Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
248	Terrace Booster pump 900 LPM, 35 M head
249	Supply and fixing of PVC sheathed following conductor 1.1 KV grade armoured Cable of following sizes including making end termination withcompression gland & bimetalic lugs,and support etc.complete as required
250	4 × 10 sq.mm.(aluminium)
251	2 x 1.5 sq mm
252	Starter Panal for Terrace Fire Fighting pump, with all necessary connections and wiring, complete as required.
253	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :
254	100 mm diameter
255	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
256	80 mm diameter
257	100 mm diameter
258	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
259	80 mm diameter
260	100 mm diameter
261	Pressure Gauge Assemble with Gate/Ball Valve
262	Pressure Sensor / Switch
263	Air release / Drain Valve
264	MS Structure support for piping
265	Sub Head - II ( Fire hydrant System)
266	Providing, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
267	100 mm diameter
268	80 mm diameter
269	25 mm diameter
270	Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
271	Single headed Gunmetal
272	Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
273	40 m
274	Providing and fixing 25 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end)
275	Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
276	Gun Metal
277	Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
278	Gun metal
279	Supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate external hydrant with butterfly valve, 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect for external hydrant as required complet in all respects.
280	Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
281	4 way - 150 mm dia M.S. Pipe
282	Providing , fixing Dry Chemical Powder(Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester PowderCoated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects(6 Kg Capacity)
283	Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity)
284	Sub Head-III (Fire Alarm & PA system )
285	Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
286	Ten Loop Panel.
287	Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
288	Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
289	Supplying, installation, testing & commissioning of addressable manual call point complete as required.
290	Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility withmain fire alarm panel for voice evacuation complete as required.
291	Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
292	Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
293	Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
294	Supply and laying of 1. 5 sq. Mm double core copper wire in existing PVC Conduit. (MAKE: POLYCAB, MESCAB)
295	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required.
296	25 mm
297	200x150 mm DIA DEEP BORE WELL WITH PUMP SET
298	Suppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site.
299	From 0.0M to 50.0 M belew G.L
300	From 51.0 M to200.00 M belew G.L
301	Basic rate item no. 117(A)supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job.
302	Cleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc.
303	Supplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/IFor safety of drilling bore including providing of guard for safety of the same till returned final.
304	Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.
305	Submersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages2.0 HP
306	Supplying complete panneal boarad with all accessories ( starter 1 no, volt meter 1 no, amp meter 1 no,100 amp kit kat ( male & female) all complete job.
307	Supplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed.3 Core 4mm thick
308	2no heavy duty clamp 40mm dia duitable for pipe with all complet job.
309	Supplying & lowering 40mm da column G. I. pipe with all complete job.
310	INTERNAL & EXTERNAL ELCTRIFICATION WORK
311	Note:- OF MAKE (1)PVC insuleted copper conductor wire of make:-Havell\"s/Polycab/Finolex (2)PVC conduit of thiknss 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB (4)Switches/soket outlet for modular type:- Anchor (roma)/Havells(cabtree)/Legrand/Schneider/C&S (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:-Havell\"s/L&T/Legrand/Schneider (6)XLPE/PVC aramoured cable:-Havell\"s/Polycab/V-guard (7) LED ITTING FIXTURE -: Havells/Bajaj/ Crompton (Model/as per E/I )/C&S (8) CEALING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha / Crompton (Model/as per E/I )/POLAR (9)OCTAGONAL POLE-: Bajaj/Philips/Surya (10) CHEMICAL EARTHING OF MAKE - TRUEPOWER EARTHING (11) CENTRALISED AIR CONDITIONING OF MAKE - VOLTAS/MITSHUBISHI/ TOSHIBA/HITACHI (12)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED
312	Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
313	Group B
314	Power plug wiring in PVC conduit(2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
315	Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
316	2x1.5 sq mm+1x1.5 sq mm earth wire(for dimmer light and foot light wiring)
317	2x2.5 sq mm+1x2.5 sq mm earth wire
318	4x2.5 sq mm+2x2.5 sq mm earth wire (for spn db 4 way submain)
319	4x6 sq mm+2x6 sq mm earth wire (subman wiring & vrf circuit)
320	4x10 sq mm+2x6 sq mm earth wire (subman wiring & vrf circuit)
321	4x16 sq mm+2x6 sq mm earth wire (submain wiring for vrf)
322	4x25 sq mm+2x16 sq mm earth wire(sub main wiring for stage light and sound system panel)
323	S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required
324	5/6 amps, one way switch
325	5/6amps, 3 pin socket outlet
326	S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
327	S/F Modular type blanking plate:-Supplying and fixing modular blanking plate on the existing modular plate switch boxexcluding modular plate etc, as required.
328	S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.
329	4/5 module(78mm x 140mm x 50mm)
330	6 module(78mm x 205mm x 50mm)
331	S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and coverin front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switchconection painting etc, as required.
332	S/F ceiling rose:-Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
333	Errection on incandescent light fitting:-Errection of wall bracket/ceiling fitting, complete with all accessories including connection etc as required.
334	S/F Dingdong Call bell :-Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required.
335	S/F twin twisted cable in conduit :-Providing and fixing plain 16/.20 mm (0.50 sq mm) twin twisted, flexible,FR PVC insuleted copper cable, in polythene sleeve of suitable size on the floor/wall ,or side of the table door etc as required(for dimmer light)
336	ITC fluorescent fitting directly on surface:-Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.
337	ITC exhaust fan up to 450 mm, sweep:-Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
338	S/F S.P. MCB DB:-Supplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
339	4 Way,Double door( for foot light control)
340	S/F T.P.MCB DB:-Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
341	4 way (4+12),Double door, Horizontal type
342	6 way (4+18),Double door, Horizontal type
343	S/F \"B\" series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, \"B\" series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
344	6/32 amps,single pole, \"B\" SERIES
345	S/F \"C\" series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, \"C\" series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
346	6/32 amps,single pole, \"C\" SERIES
347	6/32 amps,TPN(for foot light)
348	40 amps,TPN(for vrf supply)
349	50/63 amps, TPN
350	S/L 8 SWG copper wire ground :-Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.
351	P/F G.I. lightning conductor finial:-Providing and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.
352	Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required.
353	P/F G.I. lightning conductor tape in horizontal run:-Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run)
354	P/F G.I lightning conductor tape in vertical run:-Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run)
355	P/F Testing joint for G.I. lighting conductor:-Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required.
356	MV cable laying upto 35 sq.mm. in ground:-Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
357	MV cable laying upto 400 sq.mm. in ground:-Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of sizeexceeding 120 sq.mm. but not exceeding 400 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
358	S/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1)
359	10 sq.mm. 2 core (for bollard)
360	16 sq.mm. 4 core
361	70 sq.mm. 3.5 core
362	300 sq.mm. 3.5 core
363	Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required
364	Constructing pedestalfor installing light fitting outside building made up of(1:6 ) C.M Brick work with 75A designation brick of size 450 x 450 x 900 mm 400 mm umbeded in ground over 50 mm thick PCC projected 50 mm on all side and top of pedestal to be covered with75 mm PCC to supports bolts/ fittings of light completed with plaster and a coat of neat cement punning all complete including exavation etc whatever required as per direction of E.I.
365	Drilling for road crossing by horizontal direction drilling (HDD) machine for cable laying
366	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
367	4 X 16 sq. mm (28mm)
368	3½ X 300 sq. mm (70mm)
369	Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
370	FIXTURE AND CHEMICAL EARTHING
371	Providing of 12\"\" (300 mm)exhaust fan of make bajaj/havells/usha/crompton/Polar
372	S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required.48\"\" (1200 mm) ceiling fan of make bajaj/havells/usha/crompton/polar
373	Providing of 16\"\" (400 mm) Wall fan of make bajaj/havells/usha/crompton
374	SITC of following rating recess/ surface mounted LED round /square shape down light luminire with pressure dia cast housing for single phase supply voltage, Luminarie shall be confirmto IS:10322 part - 5/section -2 or IEC : 62722 with all neccessary accessories as required.18/20 W LED Square Down Lightof make bajaj/havells/crompton/C&S
375	SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.
376	90/100 W LED Street light of make bajaj/havells/crompton/C&S
377	S.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wallfor supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton
378	200 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S
379	Providing of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton
380	SITC of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz, single phase supply etc .complete as required.10/12 W LED Tube of make bajaj/havells/crompton
381	20/22 W LED battenof make bajaj/havells/crompton
382	Supplying and fixing of cable junction boxof make sintex
383	Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke.
384	Providingof 600 mm dia wall mounted air circulator fan heavy duty.
385	Supplying & fixing of dia cast aluminium housingIP 544 to 6 Watt LED Foot lamp/LED step light/ 3000K CCT (L: 84 mm, W:297mm, H:54mm) OF MAKE Jaquar / Bajaj/ Phillips/Havells
386	SITC of Downlighter Dimmeable luminar with following specification, Light source color - Tunable white,Light source replaceable - No ,Number of gear units - 2 units,Driver/power unit/transformer - Power supply unit external, Driver included - Yes , Optic type- Facetted reflector with beam angle 60°, Optical cover/lens type -Reflector ,Control interface - DALI , Protection class IEC -Safety class I , Constant light output No , RoHS mark RoHS mark, Input Voltage 220 to 240 V , Inrush current 20.4 A , Dimmable Yes , Housing Material Aluminum die cast , Reflector material Polycarbonate aluminum coated, Color White and black , Ingress protection code IP20 [ Finger-protected] , Mech. impact protection code IK03 [ 0.3 J] , Initial luminous flux (system flux) 2500 lm, Luminous flux tolerance : +/-10% ,Initial LED luminaire efficacy- 185 lm/W ,Initial input power -13.5 W , Maximum dim level - 1%; Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS
387	SITC of DALI Controller for 3 DALI outputs upto 192 DALI devices including 3 x 20 A feed through Switched circuits for DALI driver main supply, should have- CE mark , RoHS mark , Ambient temperature range- 0 to +40 °C,Supply Type -Single Phase, Supply Voltage -100-240 VAC, Supply Current- 0.5 A, DyNet DC Output Voltage -12 VDC, DyNet DC Output Current -200 mA,Switched Outputs- 3 x 20 A feed-through, Supported Protocols - DyNetDMX Rx , Indicators - 1 x diagnostic LED, Ambient temperature range 0 to +40 °C . It should work with the downlighter;Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS
388	SITC of Touch Panel for Control of the illuminace of the downlighter PABPE , should have : CE mark, Supply Voltage 12-24 VDC SELV/Class 2, Supply Current -35 mA @ 12 VDC ,20 mA @ 24 VDC , Temperature Sensor Range - 5° to 40°C (41° to 104°F) ,Temperature Sensor Accuracy-± 0.5°C (± 0.9°F),Field Effect Detection Range -approx. 15 cm (6 in), Serial Ports -1 x RS-485 ,Supported Protocols -DyNet, Indicators- 1 x service LED, Serial Port Conductor Size-2.5 mm2 (#12 AWG) (max); Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS
389	SITC of Programming DyNet module for Dynalite compatibility DACM-DyNet;Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS
390	SITC of Network Gateway for Passive integration to a PC or RS232 system and should have CE mark, RoHS mark,Ambient temperature range 0 to +40 °C, Supply Voltage- 12 VDC, Supply Current- 20 Ma, Serial Ports 2 x RS-485 1 x RS-232, Indicators 1 x DyNet power LED,Preffered Make-Signify_Dynalite/Regent lighting,XAL,SLOWS
391	Programming Charges
392	S/F of wall hanging dia cast aluminium body tempered glass diffuser IP 54 MATT GREY FINISH 90 V-260 V AC (WARM WHITE) 2X3 WATT led up and down lighter OF MAKE -JAQUAR / BAJAJ/ HAVELLS
393	S/F single sided LEDEXIT signage with built in battry backup for 2 hours. MODELE no.BESL03LED SSD WBB GREEN/RED OF BAJAJ OR equivelant
394	S.I.T.C of following rating approved make LED with rectengular / cylinderical shape of height 600 to 850mm power input 8/9 watt with dia cast aliminium housing opel with PC diffuser ,IP.65/54 protection confirming toIS 10322 part 5 etc all complete as required(excluding plinth charge)Make-Havells-LHEVBDP7IN6K008- Bamboo Bolard/ Philips-BCP150/WWPSU220-240V-7043-9W/Wipro-CRLA11008HP57-08/Bajaj-FLUTE-BGBOL605
395	Constructing platform of 300 mm dia 600 mm long with 300 mm depth bellow ground and rest 300 mm exposed over ground to support Bamboo Bollard with all finishing plaster putty & paint all complite asper direction of E/I
396	ITC LED 25/ 90W street light on wall with 25 mm dia .75meter long GIpipebend, J /U Hook 4 nos., along with two coat painting of GI pipe bend etc as required
397	MAIN PANEL
398	Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT\"s, PT\"s, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel.
399	LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets) each with following:
400	INCOMING
401	630A 35 KA MCCB FP Adjustable thermal seting
402	630A changover FP (ON-LOAD)
403	600A TPN BUSBAR(COPPER)
404	OUTGOING
405	315A MCCB FPAdjustable thermal seting
406	125 amps, 16 KA fixed thermal seting
407	32 amps.SPN MCB
408	63 amps. TPN MCB
409	OTHER ACCESSOSRIES
410	DIGITAL VOLT METER 500V(3phase class 0.5)
411	DIGITAL A METER 500V(3phase class 0.5)
412	COPPER WIRE 1.5MM
413	COPPER WIRE 6MM
414	COPPER WIRE 10MM
415	COPPER WIRE 25MM
416	LED LAMPINDICATOR
417	3 WAY 4 POLE SELECTOR SWITCH
418	C.T COIL OF CT ratio 1000/5 IS2705 part -3
419	S/F wall floor mounted cubical panel board , fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector ,incliding busbar chamber,insulator and painting etc.as required .(but without busbar copper strip)
420	Dimmable lights
421	SITC of 18 W 2000 Lumens Antiglare Controlled Beam Dali Dimmable Downlighterwith following specification. It should have aesthetic looks, high quality glossy facetted Al reflector & PDC Al external rim ,Office Compliant ,High Performance, Deep recessed, design should ensures Low Glare (UGR <= 19,cut-off 38°) for visual comfort,should be best in class system efficacy of > 120 lm/W at Luminary Level good sufficient amount of light for high, OPEX energy savings, Compact size (5”cutout dia.) & non integral driver and should be ideal for easy installation in ceilings,Power consumption (PSD version) 18.5 W, Power factor- > 0.95,SDCM < 5, Color temperature- 3000K ,Materials and finishing -PC diffuser with high haze and light transmission. Die-casting aluminium heat sink & Ring, It should be SMD LEDS , Diamond cut reflector, deep reccessed downlighter. Luminaire and driver both should be BIS approved, LM 79,LM80,TTC and IES files from NABL accredited Lab to be submitted. Working temperature range -10°C < Ta < 45°C, IP rating-IP20 / IP54 (front), Luminaries and controller should be of same make and need to get it supplied and installed from the authorised vendor of the OEM .Preferred Make-XAL/Zumtobel/Phillips/Signify/Flos
422	SITC of DALI Controller for 3 DALI outputs upto 192 DALI devices including 3 x 20 A feed through Switched circuits for DALI driver main supply, should have- CE mark , RoHS mark , Ambient temperature range- 0 to +40 °C,Supply Type -Single Phase, Supply Voltage -100-240 VAC, Supply Current- 0.5 A, DyNet DC Output Voltage -12 VDC, Controlled DC Output Current -200 mA,Switched Outputs- 3 x 20 A feed-through, Indicators - 1 x diagnostic LED, Ambient temperature range 0 to +40 °C . It should work with the downlighter;Luminaries and controller should be of same make nd need to get it supplied and installed from the authorised vendor of the OEMPreferred Make-Phillips/Signify/Biticino/Leviton/Interact/iLight
423	SITC of Relay controller for robust control of switched loads up to 20 A inductive need to be supported. The maximum load may be limited by 500 A inrush rating. , It should havefeed-through power circuit design — Electrically equivalent to a 12 pole contactor, with the added advantage of each pole being separately controllable via the controlled network. Device should beDIN-rail mountable to be installed into the distribution board supplying power to the controlled circuit., It should have inbuilt diagnostic functionality , should support circuit run time tracking on each channel and Device Online/Offline status indication., Should have hardware override switch accessible from front panel. It should also have the following detailed specs Input Voltage- 100 - 240 VAC 50 / 60 Hz Single Phase @ 0.25 A, Controller DC Supply 12 V @120 mA (supply for approx 6 user interfaces),Outputs 12 x switched feed-through outputs @ 20 A (inductive),Maximum device load 180 A, Supported wiring schemes-Single Phase and Neutral Three Phase and Neutral (Star),Maximum device load 180 A,Relays-Rated switch current: 50 A resistive 20A lighting load, Rated inrush current: 500 A, Control-Control Inputs/Outputs One DMX512 / RS-485serial port, One programmable dry contact AUX input, User Controls Service override switch for each channel, Operating Conditions Temperature: 0 to 50° C ambient, Humdity: 0 to 95% non-condensing, ambient Humidity: 0 to 90% non-condensing Certification CE, RCM; nd need to get it supplied and installed from the authorised vendor of the OEM;Preferred Make-Phillips/Signify/Biticino/Leviton/Interact/iLight
424	SITC of Touch Panel for Control of the illuminace of the downlighter , should have : CE mark, Supply Voltage 12-24 VDC SELV/Class 2, Supply Current -35 mA @ 12 VDC ,20 mA @ 24 VDC , Temperature Sensor Range - 5° to 40°C (41° to 104°F) ,Temperature Sensor Accuracy-± 0.5°C (± 0.9°F),Field Effect Detection Range -approx. 15 cm (6 in), Serial Ports -1 x RS-485 , Indicators- 1 x service LED, Serial Port Conductor Size-2.5 mm2 (#12 AWG) (max); Luminaries and controller should be of same make and need to get it supplied and installed from the authorised vendor of the OEM Preferred Make-Phillips/Signify/Biticino/Leviton/Interact/iLight
425	SITC of programming module for Controller and the Touch Panel compatibility ; Preferred Make-Phillips/Signify/Biticino/Leviton/Interact/iLight
426	SITC of Network Gateway for Passive integration to a PC or RS232 system and should have CE mark, RoHS mark,Ambient temperature range 0 to +40 °C, Supply Voltage- 12 VDC, Supply Current- 20 Ma, Serial Ports 2 x RS-485 1 x RS-232, Indicators 1 x Controlled power LED,Preferred Make-Phillips/Signify/Biticino/Leviton/Interact/iLight
427	Installation ,Commisioning and Programming Charges
428	CCTV
429	SITC of 2 MP IR Metal Bullet/ Dome Network Camera,1/3\" Progressive Scan CMOS,1920x1080 @30fps,Color: 0.01 Lux @ (F1.2, AGC ON),0.018 Lux @ (F1.6, AGC ON), 0 Lux with IR,H.265+, H.265, H.264+, H.264,Three streams,120dB WDR, 2 behavior analyses, and face detection, BLC/3D DNR/ROI,IP67, IK10,Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,3-Axis adjustment, Up to 50 Mtr IR Range, 3D DNR; ICR; EXIR, up to 50m; DC12V&PoE; Built-in micro SD/SDHC/SDXC slot; cloud service, should have protection level of IP67, IK10 TVS 2000V Lightning Protection, Surge Protection and Voltage Transient Protection, should support ONVIF (PROFILE S, PROFILE G), ISAPI,Preffered Make- Axis/Hikvision/Pelco
430	SITC of 16-ch 1U 4K NVR,Up to 16 channel IP cameras can be connected,Should support decoding H.265+/H.265/H.264+/H.264 video formats,Up to 4K high-definition live view, storage and playback,Up to 8-ch @ 1080p decoding capacity,Up to 160 Mbps high incoming bandwidth ensures IP cameras can be connected,1 HDMI and 1 VGA interfaces: both interfaces support independent video output,2 HDDs for continuous video recording,Recording Resolution-8MP/6MP/5MP/4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF,VGA Output1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz,Audio Output-1-ch, RCA (Linear, 1 KO)Two-Way Audio 1-ch, RCA (2.0 Vp-p, 1kO), Up to 6 TB capacity for each HDD,Working Temperature=-10 °C to 55 °C (14 °F to 131 °F),Working Humidity-10 to 90 %, Certifications- CE,FCC,BSI/UL or Equivalent; Preferred Make-Hikvision/Axis/ Pelco
431	Supply, fitting, fixing, commissioning andtesting 32\" LFD Full HD Panel with 2 x HDMI, 1 x USB, 1 VGA Port, remote control & battery for remote control along with all accessories & 1 year warranty. for Live View and Replay of RecordedMake:- Make:- LG/ Samsung/Panasonic
432	SITC of 4TB WD Surveillance Hard Disk storage; Preffered Make- WD/Seagate
433	SITC of Network switch with 24 x 10/100/1000T PoE ports and2 x 100/1000X SFP ports, PoE L2 Switch , Switching Capacity56Gbps and Forwarding Rate 41.7Mpps, Switch should support PoE and PoE+ with 185 W minimum power budget, operaating temperature 0°C to 50°C, , Warranty 1 year from Day 1 . Make:- Cisco,HP,Extreme,Juniper
434	SITC of 24 port UTP jack panel (24 portRJ-45 Loaded CAT-6 UTP 19\" rackmountable patch panel preferbaly with 6 blocks). Preffered Make-Legrand/Panduit/Ortronics
435	SITC of Straight LAN Patch Chord-1 Mtr Preffered Make-Legrand/Panduit/Ortronics
436	SITC of 2 Run CAT6 UTPLAN Cable in the existing surface/ recessed steel/ PVC conduit as requiredfor Network only . Make-Legrand/Panduit/Ortronics) ;
437	Supplying and fixing metal box of following sizes (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
438	100 mm X 100 mm X 60 mm deep
439	9 U (WALL MOUNT)Width (mm)-600, Depth (mm) - 600,Network Rack along with all followingstandard accessories:- (Make : Legrand /Valrack/ Schneider / Rittal)
440	S/F PVC conduit :-supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required .
441	25mm
442	Stage Light & Stage Craft
443	Note :- Approved make-
444	Stage Lighting Fixtures - Desisti /Canara lighting / Spotlight / ETC /Arri/ Philips-German/ Trilex-German/Martin/Shenoy Lighting,
445	Accessories for Lighting Fixtures like C-Clamp, Safety bond & Name plates etc - Desisti /Canara lighting / Spotlight / ETC / Arri/ Philips-German/ Trilex-German/Martin/Shenoy Lighting,
446	C-track Grid System - Stage Technologies / Waagner Biro/ Canara lighting / Daylight / Stage Craft
447	Power Distribution Electric Pannel - Seimens / L&T/Havells/ABB/SCHNEIDER/ Canara Lighting
448	Motorized Light Bar, Fixed Pipe Grid and Side Ladders - Stage Technologies / Daylight / Canara Lighting/ Stage Lighting/ Stage Craft
449	Motorised / Fixed Curtain track system and Valance fixing arrangements - Stage Technologies / Daylight / Canara Lighting/ Stage Lighting/ Stage Craft
450	Wing frame - Waagner Biro /Stage Technologies / Daylight / Canara Lighting/ Stage lighting
451	Lighting Junction boxes - Canara Lighting / Daylight / Havells / ABB
452	DMX Signal Junction boxes - Canara Lighting / ABB/SCHNEIDER / Daylight
453	Auxilliary Marshalling Boxes / Power Marshalling boxes - Canara Lighting / ABB/SCHNEIDER / Daylight
454	APDCP /MCBP/MCCP/RCP/EM Trip/Patch Pannel - Canara Lighting /ABB / SCHNEIDER/ L&T / Havells/
455	Cable trays & Internal earthing system andinstallation hardwares - Stage lighting / Stage technologies / Canara Lighting/Ricco / Daylight /
456	DMX Lighting Controller & DMX Splitter - Avolites /liteputer /Zero 88 /Canara Lighting // ADB
457	Fire Retardant Velvet Cloth - Nexgen / Daylight / Canara /Ompile/ Innovative
458	Fire Retardant Glazed Cotton Cloth - Nexgen / Daylight /Canara / Leksa Lighting
459	Plastic perforated Cyclorama Screen - Canara /JC Joel /Daylight / Nexgen/ GTC
460	Light Point Wiring - Walna /Havells / Polycab / KEI
461	DMX Point Wiring - Falcon /Beldon /deepcab /Canara /
462	SITC of 54x3W LED PAR Light used as EffectLight, Spot Light and Strobe Light etc. withbelow specifications:• Lamp: 54 X 3W RGBW LED (12R+18G+18B+6W)• Max. Power consumpsion: 160W• Power supply:240V AC, 50/60Hz• Power cable: 3 core 1.5 sq. mm. copper PVCinsulated• Channels: 8 Channel DMX-512• Beam angle: 25°• LUX @ 2m: 11,000• Control mode: DMX,Manual and Master Slave• Dimming: 0 - 100%• Function: strobe, dimming, sound active and Master slave.• Housing: Diecast aluminium with black epoxypolyster powder coating• Power and DMX: Loop in and loop out• Certification: CE
463	SITC of LED PARCAN Light used for dance hall,architectural and stage lighting with belowspecifications:• Lamp power - 100W LED• Power supply - 240 AC, 50/60 Hz• Channels: 2 channel DMX 512• Control: Manual, DMX• Color Temperature: 3000K• CRI > 90• Function: Dimming, Strobe• Dimming: 0-100%• Beam Angle - 9/15/20°• Protection rating - IP20• Certification: CE
464	SITC 200W LED Fresnel light used as a Key light,Back light, Fill light with dimming, spot & floodfocus versions for creating various effects for multipleapplications with specifications as below.• Lamp power - 200W COB LED• Power supply - 240 AC, 50/60 Hz• Power cable - 3 core 1 sq. mm. copper PVCinsulated • Color Temperature: 3200K• Control : DMX512 / Manual • Spot - Flood focus adjustment: Manual • CRI > 90• Dimming - 0-100% through manual and DMX• Beam Angle - 30°• Protection rating - IP20 • • Certification: CE
465	SITC of 200W LED Profile Spot Light used as a Spot Light and high-contrast gobo projection Light. OtherTechnical specifications as below:• Lamp Power : 200W COB LED • Power Supply : AC 230V, 50Hz.• CRI : >90 • Colour Temperature : 3200K• Focus : Manual Focus • Beam Angle : 19°• Control : DMX, Autorun and Master/Slave• Shutter arrangements : Beam shapping shutteror plastic gobo projection assembly.• Lux Level - 20,000 lux @ 2 Mtr with beam angle19°,3200K • Dimming : 0 - 100% dimming• Protection Rating : IP20 • Body Color : Black• Certification: CE
466	SITC of LED 2x2 blinder matrix Light used inEntertainment applications, Night club, Fashionshows, Film, Band performances, Discotheque,Stage performance , TV studio and large-scale showetc fixture with advanced COB LED technology withbelow specifications:-• Power Consumption: 400W • Power Supply: 240 AC, 50-60Hz • Light Color: Single color warm white / Cool Light • Channel: 4/8 channel • Lifetime: Over 50,000 hours • Beam Angle: 30°• Control mode: DMX512,Master/Slave,AutoRun,Sound active. • Dimmer: 0 -100% linearly adjustable • LUX: 8200 LUX @ 2m • IP Grade: IP20• Certification: CE
467	SITC of 150W CE Certified LED Moving Head light with technical specifications as below:• Voltage : AC 240V, 50/60Hz• Lamp :150W LED • Channel :12 /16 channels• Pan scanning : 540°• Tilt scanning : 270°• Color Wheel 1 : color wheel (10 colors + open, rotating in directions and rainbow effect)• Color Wheel 2 :Rainbow color wheel including 6 colors• Gobo Wheel : 13 gobos (lncluding 4 glass gobos) + open• Prism: 8-facet prism with clockwise and anticlockwise rotation• Dimmer: 0%-100% linear dimmer• Foggy: 0%-100% linear foggy• Touch screen and press buttons• Certification: CE
468	SITC of Diecast aluminum \"C\" clamp with safetylocking chain, duly powder coated in black matttexture finish and technical specifications as below.• Finish - Pretreated and black epoxy polyesterpowder• Safe working load – 150Kg.
469	SITC of Safety bond with lock clip (Safe Working Load 100Kgs ) to be fixed around the grid to avoid fall of the material in case if the \"C\" clamp is not locked properly including all accessories etc complete as required.
470	SITC of Identification name plate round 80mm undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in matt White texture finish including all accessories etc complete as required.
471	SITC of Fixed stage light bar, length 10 Mtrs made using 40NB dual barrel with frill fixing arrangement with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finishand provided with suitable suspender and clamps.
472	SITC of Fire retardant cotton(Ink blue/black) fabric 50% (1.5 times of the finished dimension) gathering for frill as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets including all accessories etc complete as required.Size: L 10 Mtr x H 1.2 Mtr
473	SITC of Fixed stage light bar, length 9 Mtrs made using 40NB dual barrel with frill fixing arrangement with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finishand provided with suitable suspender and clamps.
474	SITC of Fire retardant cotton(Ink blue/black) fabric 50% (1.5 times of the finished dimension) gathering for frill as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets including all accessories etc complete as required.Size: L 9 Mtr x H 1.2 Mtr
475	SITC of Fixed stage light bar, length 8 Mtrs made using 40NB dual barrel with frill fixing arrangement with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finishand provided with suitable suspender and clamps.
476	SITC of Fire retardant cotton(Ink blue/black) fabric 50% (1.5 times of the finished dimension) gathering for frill as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets including all accessories etc complete as required.Size: L 8 Mtr x H 1.2 Mtr
477	SITC of MS \"C\" track size of 40 x 50 x 40mm, 3mm thick with owal slot of 14 x 40mm at every 200mm undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish including all accessories etc complete as required.
478	SITC of 13.5Mtr Length Fixed FOH Light bar, Dual barrel duly powder coated, using 40NB dual barrel with frill fixing arrangement with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finishand provided with suitable suspender and clamps.
479	SITC of MS Power junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 4 way 10A IEC Socket of below specifications:-• Rating : 10A, 240V AC• Operating Temp : –20°C to +70°C• Mouldings : Nylon, Flammability Rating UL94V-0
480	SITC of MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the cable glands.
481	SITC of MS Signal junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX out connector of below specifications:-• All metal housing with RF protection &electromagnetic shielding• Connection to join pin 1 to chassis ground
482	SITC of MS Signal junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish finish 5 pin XLR DMX in connector of belowspecifications:-• Connection to join pin 1 to chassis ground.
483	SITC of DMX lighting junction loop box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector ofbelow specifications:-• Connection to join pin 1 to chassis ground.
484	SITC of MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors including all accessories etc complete as required.
485	SITC of MS Fabricated made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections including all accessories etc complete as required.
486	SITC of MS perforated trays with tray lid of size 40 mm X 75 mm X 40 mm, treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement including all accessories etc complete as required.
487	SITC of MS perforated trays with tray lid of size 40 mm X 150 mm X 40 mm, treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement including all accessories etc complete as required.
488	SITC of Internal earthing copper bare conductor network for earthing of lightning bars ,cable trays & metal accesseries related to work coming under the scope of work including all accessories etc complete as required.
489	Supply, Installation, Testing and commissioning of Installation hardwares required for the successful execution of work
490	SITC of 15 Way Direct Lighting Distribution Board made up of MS CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish consisting of suitable rating TPN incomer, SP MCB\"s for the junction boxes fixed on the top of the grid including wiring and busbar connection with proper earthing and Hinged door with magnetic door lock including all accessories etc complete as required.
491	SITC of Digital Lighting Console with 1024 DMXchannels• 1024 Channels.• 96 Fixtures.• 96 Dimmer Control Channels.• Time control of scenes: Fade in/out, LTP slope• Channels for each fixture 40 primary + 40 fine tune• LCD display with back light• 60 Scenes/Playbacks• 600 Scene step• 10 Scenes to run simultaneoulsy• Shape generator: Shapes of Dimmer, Pan/Tilt,RGB, CMY, Color, Gobo, Iris and Focus• Master slider - Global, playback, fixture• USB Memory - FAT32 supporteD
492	SITC of Wall mount 1 feeder motor control centre panel & Remote control panel ( For Motorized main curtain) with emergency trip, necessary contactors and relays, push button stations and contact elements to control the motors system for curtains including all accessories etc complete as required.
493	SITC of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications:• Power Supply: 90-240V AC, 45-63Hz.• Control: DMX 512 protocol,• Control Signal input: 5 pin XLR female,
494	Supply, Installation, Testing and commissioning of 5 Pin XLR Male & Female Connectors for DMX network
495	Supply, Installation, Testing and commissioning of 5 Pin XLRTermination Connectors for DMX network.
496	Supply, Installation, Testing and commissioning of Black valcro tape for Cable dressing.
497	Supply & laying of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm including terminations etc complete as required.
498	SITC of Screened DMX signal cable for DMX network including terminations etc complete as required.
499	SITC of Main Valence fixing arrangement using 40NB Pipe 2mm thick, 15 mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets to suspend the arrangement including all accessories etc complete as required.
500	SITC of Fire retardant velvette (Maroon/Red/Blue) fabric 100% (2 times of the finished dimension) gathering for main Valanceas per the approved patern and colour, not less than 250/300 GSM, duly stitched along with and eyelets including all accessories etc complete as required.Size :L 15 Mtr x H 1.2 Mtr.

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum. Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum., Musabani-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum. Construction Of Auditorium At Cts, Musabani In The District Of East Singhbhum., Musabani-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us